draft-ietf-ccamp-gmpls-sonet-sdh-extensions-00.txt query

["Saha, Sayandeb" <ssaha@netplane.com>]

Shouldn't the following examples in draft
draft-ietf-ccamp-gmpls-sonet-sdh-extensions-00.txt

3. An STS-48c signal with LOH DCC and E2 transparency is formed by the
application of RCC with flag 1, NCC with value 1, NVC with value 0, MT with
value 1 and T with flag 5 and 10 to an STS-48 Elementary Signal.

be

An STS-48c signal with LOH DCC and E2 transparency is formed by the
application of RCC with flag 1, NCC with value 16, NVC with value 0, MT with
value 1 and T with flag 5 and 10 to an STS-3c SPE elementary signal,
according to  the following ...

"when requesting a SONET STS-Nc SPE with N=3*X, the elementary signal to use
must always be an STS-3c SPE signal type and the value of NCC must always be
equal to X. This allows also facilitating the interworking between SONET and
SDH. In particular, it means that the contiguous concatenation of three
STS-1 SPEs cannot not be requested because according to this specification,
this type of signal must be coded using the STS-3c SPE signal type. "

in the draft-ietf-ccamp-gmpls-sonet-sdh-02.txt .
There's a similar problem with example 4 too.
-Sayan