RE: ason-routing-reqts: issue 2 architecture

["Don Fedyk" <dwfedyk@nortelnetworks.com>]

Dimitri

If you are saying the real or logical node id that is associated with the
Data (bearer) plane should be unique? I would say yes. 

If you are saying could it be IP address format? I would say yes. (Note the
link identifiers in IP address format are unique only with respect to the
node id).

But if you say Should it then follow each piece of equipment has knowledge
of this IP address format that is assigned to it? I would say no because
there is equipment that won't have this for some time. (A requirement I
understand from ASON).   

So what I believe you are left with is some bearer equipment which has TE
resources (a node Identifier (non-IP) and link identifiers (non-IP)). This
equipment is known by its native identifiers to the entity in the control
plane which can assign: IP format identifiers to the equipment (through some
means) and an unique node identifier. This can then be advertised on its
behalf as a GMPLS compatible TE LSA. 

This does create some challenges but in reality I think many devices are
known by more than one name. (Look at VoIP, devices they have 2 identifiers
E.164 and IP. I personally never use my IP address to make a VoIP phone call
but I know that it is routed to a IP address along the way that is hidden
from me.)

I tend to agree with Lyndon that Topology is derived from TE advertisements.
I don't understand what you could do without a unique logical node
associated with the TE links. 

Don 

> -----Original Message-----
> From: Dimitri.Papadimitriou@alcatel.be 
> [mailto:Dimitri.Papadimitriou@alcatel.be] 
> Sent: Tuesday, March 16, 2004 1:48 PM
> To: Ong, Lyndon
> Cc: Fedyk, Don [BL60:1A00:EXCH]; Adrian Farrel; Brungard, 
> Deborah A, ALABS; ccamp@ops.ietf.org
> Subject: Re: ason-routing-reqts: issue 2 architecture
> 
> 
> the problem is not an issue of being cleaner, the issue
> is once the following assumption is taken (which is the
> logical consequence of rfc 3630 in the gmpls context)
> 
> "a stable IP address of the control plane entity that
> manages the resources on behalf of the data plane
> entity whose resources are being advertised."
> 
> can we assume that wrt to this stable IP address the
> resource identification will be unique (throughout
> these multiple data plane entities) and in this case
> it holds (no additional level of indirection needed),
> or not (i.e. you will find duplicated id space values
> and then an additional level of indirection is needed)
> 
> the problem of the design team was not define the issue
> but to find enough arguments wrt to the operational
> practices (ie user community) in order to close this
> 
> thanks,
> - dimitri.
> 
> Ong, Lyndon wrote:
> > I had the same assumption as Don, that the RFC treats the 
> advertising 
> > router and the bearer plane node as the same. It would be 
> cleaner if 
> > there was also a bearer plane node identifier in the advertisement.
> > 
> > Cheers,
> > 
> > Lyndon
> > 
> > -----Original Message-----
> > From: Don Fedyk [mailto:dwfedyk@nortelnetworks.com]
> > Sent: Tuesday, March 16, 2004 9:56 AM
> > To: Adrian Farrel; Brungard, Deborah A, ALABS; ccamp@ops.ietf.org
> > Subject: RE: ason-routing-reqts: issue 2 architecture
> > 
> > 
> > Hi Adrian
> > 
> > See Comments Below,
> > 
> > 
> >>-----Original Message-----
> >>From: Adrian Farrel [mailto:adrian@olddog.co.uk]
> >>Sent: Monday, March 15, 2004 4:18 PM
> >>To: Brungard, Deborah A, ALABS; ccamp@ops.ietf.org
> >>Subject: Re: ason-routing-reqts: issue 2 architecture
> >>
> >>
> >>I assume that the desire is to have one control plane entity
> >>mange multiple data plane entities (not to have one data 
> >>plane entity managed by multiple control plane entities).
> > 
> > 
> > I agree.
> > 
> >>I believe. in this context, it might be helpful to separate
> >>the signaling function (and the associated routing function 
> >>for the delivery of the signaling messages) from the TE 
> >>advertisement routing function. Since we are discussing the 
> >>routing requirements (this is the routing DT) can I assume 
> >>that the discussion is limited to the TE advertisement 
> >>routing function, with the aim to have one control plane 
> >>entity advertise the resources on behalf of multiple data 
> >>plane entities.
> >>
> >>If all of the above, why could you not simply do this using
> >>RFC3630? The only wrinkle might be that the Router Address 
> >>TLV is described as carrying "a stable IP address of the 
> >>advertising router". Clearly, this needs to be interpreted as 
> >>"a stable IP address of the control plane entity that manages 
> >>the resources on behalf of the data plane entity whose 
> >>resources are being advertised."
> > 
> > 
> > Interesting. I thought that you need a logical node id for 
> the bearer 
> > plane as well even though you are only advertising from a single 
> > entity.  In other words, is it not the desire to have the TE 
> > advertisements contain the same information regardless of whether 
> > there is a one to one correspondence between the nodes in 
> control and 
> > the data plane or there is a one to many relationship? My 
> > interpretation of RFC3630 is that it assumes the 
> advertising router is 
> > the same as the logical node in the bearer plane that owns the 
> > resources. If a logical node id was added to the 
> advertisement for the 
> > node terminating the resources when the advertising router 
> was not the 
> > bearer node that owned the resources it would be clearer to me.
> > 
> > Don
> > 
> > 
> > 
> >>Am I missing something?
> >>
> >>Adrian
> >>
> >>----- Original Message -----
> >>From: "Brungard, Deborah A, ALABS" <dbrungard@att.com>
> >>To: <ccamp@ops.ietf.org>
> >>Sent: Monday, March 15, 2004 7:43 PM
> >>Subject: ason-routing-reqts: issue 2 architecture
> >>
> >>
> > 
> > 
> ftp://ftp.isi.edu/internet-drafts/draft-ietf-> ccamp-gmpls-ason-routing-
> > reqts-
> > 02.txt
> > 
> > The second DT issue is on the physical architecture which can be 
> > supported by GMPLS (from the draft):
> > 
> > ASON does not restrict the architecture choices used, either a 
> > co-located architecture or a physically separated 
> architecture may be 
> > used. Some members of the Design Team are concerned that GMPLS's 
> > concept of the LSR requires a 1-to-1 relationship between the 
> > transport plane entity and the control plane entity (Router). They 
> > invite CCAMP input on GMPLS capabilities to support multiple 
> > architectures i.e. how routing protocols would identify the 
> transport 
> > node ID vs. the router or routing controller ID when 
> scoping Link IDs 
> > in a link advertisement. Deborah
> > 
> > 
> > 
> > 
> > 
> 
> -- 
> Papadimitriou Dimitri
> E-mail : dimitri.papadimitriou@alcatel.be
> E-mail : dpapadimitriou@psg.com
> Webpage: http://psg.com/~dpapadimitriou/
> Address: Fr. Wellesplein 1, B-2018 Antwerpen, Belgium
> Phone  : +32 3 240-8491
> 
>