I-D ACTION:draft-ietf-ccamp-tunproto-00.txt

[Internet-Drafts@ietf.org]

A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Common Control and Measurement Plane Working Group of the IETF.

	Title		: Generic Tunnel Tracing Protocol (GTTP) Specification
	Author(s)	: R. Bonica, et al
	Filename	: draft-ietf-ccamp-tunproto-00.txt
	Pages		: 38
	Date		: 2004-4-6
	
This document describes the Generic Tunnel Tracing Protocol (GTTP).
GTTP supports enhanced route-tracing applications. Network operators
use enhanced route-tracing applications to trace the path between any
two points in an IP network. Enhanced route-tracing applications can
trace through a network's forwarding plane, its control plane or
both. Furthermore, enhanced route-tracing applications can reveal
details concerning tunnels that support the traced path. Tunnel
details can be revealed regardless of tunneling technology. For
example, enhanced route-tracing applications can trace through an
MPLS LSP as well as they can trace through an IP-in-IP tunnel.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ccamp-tunproto-00.txt

To remove yourself from the I-D Announcement list, send a message to 
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.  
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.


Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-ccamp-tunproto-00.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-ccamp-tunproto-00.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

<ftp://ftp.ietf.org/internet-drafts/draft-ietf-ccamp-tunproto-00.txt>