Basic doubts on 1:1 path protection signaling.

["Balasubramania N. Pillai" <bpillai@lopsys.com>]

Hi All,

I was reading the draft-ietf-ccamp-gmpls-recovery-e2e-signaling-00.txt and I
have some basic doubts regarding signaling 1:1 protected LSP with extra
traffic.


1. My understanding is that Section 7 talks about 1:1 Protection (the
protection path is fully setup and cross-connects are made) and not 1:1
Restoration (no cross-connects for protection path)

2. Since the protection LSP is setup (cross-connected), I guess we should
advertise that the resources used by the Protection LSP as "in use" in
routing.

3. Section 7, Paragraph 3 says that

	Although the resources for the protecting LSP are pre-allocated,
	preemptable traffic may be carried end-to-end using this LSP (i.e.
	the protecting LSP is capable of carrying extra-traffic) with the
	caveat that this traffic will be preempted if the working LSP fails.

Take the case where a 1:1 LSP is setup. Both the working LSP and the
protection LSP are setup and cross-connected. Now if we want to add a
extra-traffic, how do we signal, to setup the LSP carrying the Extra
traffic. What objects do we use to associate the "Extra Traffic LSP" to the
protection LSP.

Thanks for you time

Balu