----- Original Message -----
Sent: Wednesday, May 12, 2004 7:10
PM
Subject: Questions about
draft-ietf-ccamp-lmp-mib-08.txt
Hi,
In the lmpTeLinkTable we have
lmpTeLinkVerification
OBJECT-TYPE
SYNTAX
TruthValue
MAX-ACCESS
read-create
STATUS current
DESCRIPTION
"This object indicates if the extended LMP link
verification
procedure is enabled for this TE link."
REFERENCE
"Link
Management Protocol, RFC xxx"
-- RFC Editor to fill in RFC number that will be assigned
to
--
[LMP]
::= { lmpTeLinkEntry 2 }
lmpTeLinkFaultManagement
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS
read-create
STATUS current
DESCRIPTION
"This object indicates if the extended LMP fault
management
procedure is enabled on this TE link."
REFERENCE
"Link
Management Protocol, RFC
xxx"
-- RFC Editor
to fill in RFC number that will be assigned
to
--
[LMP]
::= { lmpTeLinkEntry 3 }
lmpTeLinkDwdm
OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS
read-create
STATUS
current
DESCRIPTION
"This
object indicates if the extended LMP DWDM
procedure
is
enabled on this TE link."
REFERENCE
"Link
Management Protocol, RFC
xxx"
-- RFC Editor
to fill in RFC number that will be assigned to
--
[LMP]
::= { lmpTeLinkEntry 4 }
So, I searched in draft-ietf-ccamp-lmp-10.txt
but couldn't find suitable references.
I assume that:
- "extended LMP link
verification procedure" means
"LMP link verification procedure"
and that you have
used the word "extended" because
it is an optional
procedure.
- Ditto for "extended LMP fault management
procedure"
- the "extended LMP DWMD procedure" is intended
to
refer to the LMP-WDM extensions
defined in
draft-ietf-ccamp-lmp-wdm-02.txt (in
which case the
reference is wrong).
Could you confirm or deny.
Thanks,
Adrian