I-D ACTION:draft-ietf-ccamp-gmpls-segment-recovery-01.txt

[Internet-Drafts@ietf.org]

A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Common Control and Measurement Plane Working Group of the IETF.

	Title		: GMPLS Based Segment Recovery
	Author(s)	: L. Berger, et al.
	Filename	: draft-ietf-ccamp-gmpls-segment-recovery-01.txt
	Pages		: 24
	Date		: 2004-10-26
	
This document describes protocol specific procedures for GMPLS
   (Generalized Multi-Protocol Label Switching) RSVP-TE (Resource
   ReserVation Protocol - Traffic Engineering) signaling extensions to
   support LSP segment protection and restoration.  These extensions are
   intended to be compliment and be consistent with the Extensions for
   End-to-End GMPLS-based Recovery.  Implications and interactions with
   Fast Reroute are also addressed.  This document also updates the
   handling of Notify_Request objects specified in [RFC3473].

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ccamp-gmpls-segment-recovery-01.txt

To remove yourself from the I-D Announcement list, send a message to 
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.  
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.


Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-ccamp-gmpls-segment-recovery-01.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-ccamp-gmpls-segment-recovery-01.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

<ftp://ftp.ietf.org/internet-drafts/draft-ietf-ccamp-gmpls-segment-recovery-01.txt>