[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Failure definition w.r.t. SONET/SDH and Protection/Restoration
Hi Adrian & Igor,
But there is one issue with this multilayer protection.
Say in the case if the link gets broken, and the lower layer protection has succeeded.
In this case, should the control plane(higher layer) be notified by the lower layer of link??
If yes than it has following consequences:
- As control plane is unaware of any failure, control plane will continue to setup new connections on the failed.
- This may not be a good thing to do.
- Some means may be needed to avoid this link in Path computation.
If no than following are the consequences:
- Control plane too will go ahead with its protection mechanism.
Let me know your view.
Regards,
Amit.
----- Original Message -----
From: Adrian Farrel <adrian@olddog.co.uk>
Date: Thursday, March 24, 2005 7:40 pm
Subject: Re: Failure definition w.r.t. SONET/SDH and Protection/Restoration
> Hi Amit,
>
> > Do you mean to say that Data plane & Control plane protection
> shouldbe independant of each other??
>
> No, I mean that they MAY be independent.
> In particular, if you are using the control plane *and* the data
> plane to
> manage protection on the same set of resources you are bound to
> get in a
> horrible mess.
>
> Seems more reasonable that you would apply data plane protection
> first and
> then apply control plane protection at a higher level.
>
> > If so, in case of MSP protection in SDH,
> > Control plane should not have any control over the resource pool
> > used for MSP switch.
> > This may lead to lot of unused resource in the network.
>
> It is certain that each layer of protection that you install MAY
> result in
> unused resources. Building multiple layers of protection will,
> therefore,potentially build up more and more unused resources. It
> is the job of
> CCAMP to produce the tools that allow operators to build the
> protectionschemes that they want. It's not really our business to
> tell them which
> schemes to build and when.
>
> Cheers,
> Adrian
>
>