[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
draft-ietf-ccamp-rsvp-node-id-based-hello-02.txt now back with AD
Hi Alex,
We held a further WG last call on this I-D after updating it to Proposed
Standard as you requested.
No-one objected to this change, so the I-D is now back with you for
approval.
Thanks,
Adrian
----- Original Message -----
From: "Adrian Farrel" <adrian@olddog.co.uk>
To: <ccamp@ops.ietf.org>
Sent: Wednesday, September 07, 2005 9:48 PM
Subject: Short further last call on
draft-ietf-ccamp-rsvp-node-id-based-hello-02.txt
> Hi,
>
> Alex has reviewed this I-D as AD and says it is fine, but he thinks we
> should take it down the standards track as Proposed Standard not BCP as
it
> was previously marked.
>
> This revision changes:
> - proposed status
> - IPR boilerplate
> - IANA clause to be a little more (about 10 words) detailed
>
> Since we have changed the proposed status, we need to check back with
you
> guys.
>
> Let's have a two week last call on this change.
>
> If you do spot other issues as you go, then I guess we can handle them
> too.
>
> Last call will end 12 noon GMT on Thursday 22nd September.
>
> Thanks,
> Adrian
>
>
> ----- Original Message -----
> From: <Internet-Drafts@ietf.org>
> To: <i-d-announce@ietf.org>
> Cc: <ccamp@ops.ietf.org>
> Sent: Wednesday, September 07, 2005 8:50 PM
> Subject: I-D ACTION:draft-ietf-ccamp-rsvp-node-id-based-hello-02.txt
>
>
> > A New Internet-Draft is available from the on-line Internet-Drafts
> directories.
> > This draft is a work item of the Common Control and Measurement Plane
> Working Group of the IETF.
> >
> > Title : Node ID based RSVP Hello: A Clarification Statement
> > Author(s) : Z. Ali, et al.
> > Filename : draft-ietf-ccamp-rsvp-node-id-based-hello-02.txt
> > Pages : 7
> > Date : 2005-9-7
> >
> > Use of Node-ID based RSVP Hello messages is implied in a number of
> > cases, e.g., when data and control plan are separated, when TE
links
> > are unnumbered. Furthermore, when link level failure detection is
> > performed by some means other than exchanging RSVP Hello messages,
> > use of Node-ID based Hello session is optimal for detecting
signaling
> > adjacency failure for Resource reSerVation Protocol-Traffic
> > Engineering (RSVP-TE). Nonetheless, this implied behavior is
unclear
> > and this document formalizes use of Node-ID based RSVP Hello
session
> > as a best current practice (BCP) in some scenarios. The procedure
> > described in this document applies to both Multi-Protocol Label
> > Switching (MPLS) and Generalized MPLS (GMPLS) capable nodes.
> >
> > A URL for this Internet-Draft is:
> >
>
http://www.ietf.org/internet-drafts/draft-ietf-ccamp-rsvp-node-id-based-hello-02.txt
> >
> > To remove yourself from the I-D Announcement list, send a message to
> > i-d-announce-request@ietf.org with the word unsubscribe in the body of
> the message.
> > You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
> > to change your subscription settings.
> >
> >
> > Internet-Drafts are also available by anonymous FTP. Login with the
> username
> > "anonymous" and a password of your e-mail address. After logging in,
> > type "cd internet-drafts" and then
> > "get draft-ietf-ccamp-rsvp-node-id-based-hello-02.txt".
> >
> > A list of Internet-Drafts directories can be found in
> > http://www.ietf.org/shadow.html
> > or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
> >
> >
> > Internet-Drafts can also be obtained by e-mail.
> >
> > Send a message to:
> > mailserv@ietf.org.
> > In the body type:
> > "FILE
> /internet-drafts/draft-ietf-ccamp-rsvp-node-id-based-hello-02.txt".
> >
> > NOTE: The mail server at ietf.org can return the document in
> > MIME-encoded form by using the "mpack" utility. To use this
> > feature, insert the command "ENCODING mime" before the "FILE"
> > command. To decode the response(s), you will need "munpack" or
> > a MIME-compliant mail reader. Different MIME-compliant mail readers
> > exhibit different behavior, especially when dealing with
> > "multipart" MIME messages (i.e. documents which have been split
> > up into multiple messages), so check your local documentation on
> > how to manipulate these messages.
> >
> >
> > Below is the data which will enable a MIME compliant mail reader
> > implementation to automatically retrieve the ASCII version of the
> > Internet-Draft.
> >
>
>
> ------------------------------------------------------------------------
--
> ------
>
>
> > _______________________________________________
> > I-D-Announce mailing list
> > I-D-Announce@ietf.org
> > https://www1.ietf.org/mailman/listinfo/i-d-announce
> >
>
>
>
>