[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Pre-release 2 of Notification Update
Hi
I'm almost done the update (hopefully). Attached is a pre-release.
Please let me know if anything was incorrectly executed.
<<rfcdiff.pyht_two.htm>>
Disclaimers:
1. I have not validated much of the schema or examples
2. I got a bit confused in the updates to section 5.2. These may still
have issues.
3. I have not done anything about replays in the future. The text
remains unchanged in this area.
4. I need to double check that I have not missed updates.
5. There were a few changes (mainly editorial) that I did not make for
specific reasons which I need to send an email to discuss.
6. Not sure if using correct namespace in section 2.1.1.1. Andy said
what was there was wrong, but it validates for me and there was no
suggestions. I tried something else, but it didn't validate.
7. There was a request to add description of how to define notification
instances, which has not been added, but there are now two examples (one
in replayComplete and one in the examples in section 5). Is this
sufficient?
8. I have not validate that I am always using the correct The URI
string (NAMESPACE IDENTIFIER) instead of (CAPABILITY IDENTIFIER)
Sharon Chisholm
Nortel
Ottawa, Ontario
Canada
Title: wdiff draft-ietf-netconf-notification-08.txt netconf_event.txt
Network Working Group S. Chisholm
Internet-Draft Nortel
Intended status: Standards Track H. Trevino
Expires: January February 9, 2008 Cisco
July
August 8, 2007
NETCONF Event Notifications
draft-ietf-netconf-notification-08.txt.pre-release
draft-ietf-netconf-notification-09.txt.prerelease2
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on January February 9, 2008.
Copyright Notice
Copyright (C) The IETF Trust (2007).
Abstract
This document defines mechanisms which provide an asynchronous
message notification delivery service for the NETCONF protocol. This
is an optional capability built on top of the base NETCONF
definition. This document defines the capabilities and operations
necessary to support this service.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1. Definition of Terms . . . . . . . . . . . . . . . . . . . 4
1.2. Motivation . . . . . . . . . . . . . . . . . . . . . . . . 5
1.3. Event Notifications in NETCONF . . . . . . . . . . . . . . 5
1.4. Requirements . . . . . . . . . . . . . . . . . . . . . . . 6
2. Notification-Related Operations . . . . . . . . . . . . . . . 7
2.1. Subscribing to Receive Event Notifications . . . . . . . . 7
2.1.1. <create-subscription> . . . . . . . . . . . . . . . . 7
2.2. Sending Event Notifications . . . . . . . . . . . . . . . 9
2.2.1. <notification> . . . . . . . . . . . . . . . . . . . . 9
2.3. Terminating the Subscription . . . . . . . . . . . . . . . 10
3. Supporting Concepts . . . . . . . . . . . . . . . . . . . . . 11
3.1. Capabilities Exchange . . . . . . . . . . . . . . . . . . 11
3.1.1. Capability Identifier . . . . . . . . . . . . . . . . 11
3.1.2. Capability Example . . . . . . . . . . . . . . . . . . 11
3.2. Event Streams . . . . . . . . . . . . . . . . . . . . . . 11
3.2.1. Event Stream Definition . . . . . . . . . . . . . . . 12 13
3.2.2. Event Stream Content Format . . . . . . . . . . . . . 13
3.2.3. Default Event Stream . . . . . . . . . . . . . . . . . 13
3.2.4. Event Stream Sources . . . . . . . . . . . . . . . . . 13
3.2.5. Event Stream Discovery . . . . . . . . . . . . . . . . 13
3.3. Notification Replay . . . . . . . . . . . . . . . . . . . 15 16
3.3.1. Overview . . . . . . . . . . . . . . . . . . . . . . . 15 16
3.3.2. Creating a Subscription with Replay . . . . . . . . . 16
3.3.3. Replay Complete Notification . . . . . . . . . . . . . 16
3.4. Notification Management Schema . . . . . . . . . . . . . . 16 17
3.5. Subscriptions Data . . . . . . . . . . . . . . . . . . . . 19 20
3.6. Filter Mechanics . . . . . . . . . . . . . . . . . . . . . 19 20
3.6.1. Filtering . . . . . . . . . . . . . . . . . . . . . . 19 20
3.7. Message Flow . . . . . . . . . . . . . . . . . . . . . . . 19 20
4. XML Schema for Event Notifications . . . . . . . . . . . . . . 21 23
5. Filtering Examples . . . . . . . . . . . . . . . . . . . . . . 25 27
5.1. Subtree Filtering . . . . . . . . . . . . . . . . . . . . 25 30
5.2. XPATH filters . . . . . . . . . . . . . . . . . . . . . . 28 31
6. Security Considerations . . . . . . . . . . . . . . . . . . . 30 33
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 31 34
8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 32 35
9. Normative References . . . . . . . . . . . . . . . . . . . . . 33 36
Appendix A. Change Log . . . . . . . . . . . . . . . . . . . . . 34 37
A.1. Version -08 . . . . . . . . . . . . . . . . . . . . . . . 34 37
A.2. Version -09 . . . . . . . . . . . . . . . . . . . . . . . 39
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 37 42
Intellectual Property and Copyright Statements . . . . . . . . . . 38 43
1. Introduction
[NETCONF] can be conceptually partitioned into four layers:
Layer Example
+-------------+ +----------------------------------------+
| Content | | Configuration data |
+-------------+ +----------------------------------------+
| |
+-------------+ +-------------------------------------------+
| Operations | | <get-config>, <edit-config> <notification>|
+-------------+ +-------------------------------------------+
| | |
+-------------+ +-----------------------------+ |
| RPC | | <rpc>, <rpc-reply> | |
+-------------+ +-----------------------------+ |
| | |
+-------------+ +------------------------------------------+
| Transport | | BEEP, SSH, SSL, console |
| Protocol | | |
+-------------+ +------------------------------------------+
Figure 1
This document defines mechanisms which provide an asynchronous
message notification delivery service for the [NETCONF] protocol.
This is an optional capability built on top of the base NETCONF
definition. This memo defines the capabilities and operations
necessary to support this service.
1.1. Definition of Terms
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
Element: An [XML] Element.
Subscription: An agreement and method to receive event notifications
over a NETCONF session. A concept related to the delivery of
notifications (if there are any to send) involving destination and
selection of notifications. It is bound to the lifetime of a
session.
Operation: This term is used to refer to NETCONF protocol operations
[NETCONF]. Specifically within Within this document, operation refers to NETCONF
protocol operations defined in support of NETCONF notifications.
Event: An event is something that happens which may be of interest -
a configuration change, a fault, a change in status, crossing a
threshold, or an external input to the system, for example. Often
this results in an asynchronous message, sometimes referred to as
a notification or event notification, being sent to interested
parties to notify them that this event has occurred.
Replay: The ability to send/re-send previously logged notifications
upon request. These notifications are sent asynchronously. This
feature is implemented by the NETCONF server and invoked by the
NETCONF client.
Stream: An event stream is a set of event notifications matching
some forwarding criteria and it is available to NETCONF clients
for subscription.
Filter: A parameter that indicates which subset of all possible
events are of interest. A filter is defined as one or more filter
element [NETCONF], which each identifies a portions of the overall
filter.
1.2. Motivation
The motivation for this work is to enable the sending of asynchronous
messages that are consistent with the data model (content) and
security model used within a NETCONF implementation.
1.3. Event Notifications in NETCONF
This memo defines a mechanism whereby
The scope of the NETCONF client indicates
interest work aims meeting the following operational needs:
o Initial release should ensure it supports notifications in receiving event support
of configuration operations.
o It should be possible to use the same data model for notifications from
as for configuration operations.
o Solution should support a NETCONF server by
creating reasonable message size limit (i.e., not
too short)
o The notifications should be carried over a connection-oriented
delivery mechanism.
o A subscription to receive event notifications. The mechanism for notifications should be provided.
This takes into account that a NETCONF server replies to indicate whether the subscription request was
successful and, if it was successful, begins sending the event does not send
notifications before being asked to do so and that it is the
NETCONF client as the events occur within who initiates the
system. These event flow of notifications.
o A filtering mechanism for sending notifications will continue to should be sent until
either put in
place within the NETCONF server.
o The information contained in a notification should be sufficient
so that it can be analyzed independent of the transport mechanism.
In other words the data content fully describes a notification;
protocol information is not needed to understand a notification.
o The server should have the capability to replay locally logged
notifications.
1.3. Event Notifications in NETCONF
This memo defines a mechanism whereby the NETCONF client indicates
interest in receiving event notifications from a NETCONF server by
creating a subscription to receive event notifications. The NETCONF
server replies to indicate whether the subscription request was
successful and, if it was successful, begins sending the event
notifications to the NETCONF client as the events occur within the
system. These event notifications will continue to be sent until
either the NETCONF session is terminated or the subscription
terminates for some other reason. The event notification
subscription allows a number of options to enable the NETCONF client
to specify which events are of interest. These are specified when
the subscription is created.
A NETCONF server is will not read RPC requests, by default, on the
session associated with the subscription until the client SHOULD NOT send requests while a notification subscription
is done. A capability may be advertised to announce
that a active, because the server is able to MAY NOT process RPCs while a notification stream is
active on a session. The behaviour them. An example of such
when the notifications would be process is if a separate capability is outside
the scope
was advertised indicating support of this document.
1.4. Requirements functionality.
2. Notification-Related Operations
2.1. Subscribing to Receive Event Notifications
The following requirements have been addressed event notification subscription is initiated by the solution:
o Initial release should ensure it supports notification in support
of configuration operations
o Data content must not preclude NETCONF
client and responded to by the use NETCONF server. A subscription is
bound to a single stream for the lifetime of the same data model as
used in configuration
o Solution should support a reasonable message size limit (ie, not
too short)
o Solution should provide reliable delivery of notifications
o Solution should provide a subscription mechanism (A NETCONF server
does not send notifications before being asked to do so and the
NETCONF client initiates the flow of notifications)
o Solution should provide a filtering mechanism within the NETCONF
server
o Solution should send sufficient information in a notification so
that it can be analyzed independent of the transport mechanism
(data content fully describes a notification; protocol information
is not needed to understand a notification)
o Solution should support replay of locally logged notifications
2. Notification-Related Operations
2.1. Subscribing to Receive Event Notifications
The event notification subscription is initiated by the NETCONF
client and responded to by the NETCONF server. subscription. When
the event notification subscription is created, the events of
interest are specified.
Content for an event notification subscription can be selected by
applying user-specified filters.
2.1.1. <create-subscription>
Description:
This operation initiates an event notification subscription which
will send asynchronous event notifications to the initiator of the
command until the subscription terminates.
Parameters:
Stream:
An optional parameter parameter, <stream>, that indicates which stream of
events is of interest. If not present, then events in the default
NETCONF stream will be sent.
Filter:
An optional parameter parameter, <filter>, that indicates which subset of
all possible events are is of interest. The format of this
parameter is the same as that of the filter parameter in the
NETCONF protocol operations. If not present, all events not
precluded by other parameters will be sent. See section 3.6
for more information on filters.
Start Time:
A parameter parameter, <startTime>, used to trigger the replay feature
and indicate that the replay should start at the time
specified. If
startTime <startTime> is not present, this is not a replay
subscription. It is valid to specify start times that are
later than the current time. If the startTime <startTime> specified is
earlier than the log can support, the replay will begin with
the earliest available notification. This parameter is of type
dateTime.
Stop Time:
An optional parameter parameter, <stopTime>, used with the optional
replay feature to indicate the newest notifications of
interest. If stop time is not present, the notifications will
continue until the subscription is terminated. Must be used
with and be later than 'startTime'. <startTime>. It is valid to specify
stop times that are later than the current time. This
parameter is of type dateTime.
Positive Response:
If the NETCONF server can satisfy the request, the server sends an
<ok> element.
Negative Response:
An <rpc-error> element is included within the <rpc-reply> if the
request cannot be completed for any reason. Subscription requests
will fail if a filter with invalid syntax is provided or if the
name of a non-existent profile or stream is provided.
If a stopTime <stopTime> is specified in a request without having specified
a
startTime <startTime>, the following error is returned:
Tag: missing-element
Error-type: protocol
Severity: error
Error-info: <badElement>: <bad-element>: startTime
Description: An expected element is missing.
If the optional replay feature is requested but it is not
supported by the NETCONF server, the following error is returned:
Tag: operation-failed
Error-type: protocol
Severity: error
Error-info: none
Description: Request could not be completed because the
requested operation failed for some reason not covered by any
other error condition
2.1.1.1. Usage Example
The following demonstrates creating a simple subscription. More
complex examples can be found in section 5.
<netconf:rpc message-id="101"
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0"\>
<create-subscription
xmlns="urn:ietf:params:netconf:capability:notification:1.0">
</create-subscription>
</netconf:rpc>
Figure 2
2.2. Sending Event Notifications
Once the subscription has been set up, the NETCONF server sends the
event notifications asynchronously over the connection.
2.2.1. <notification>
Description:
An event notification is sent to the client who initiated a
<create-subscription> command asynchronously when an event of
interest (i.e., meeting the specified filtering criteria) to them has
occurred. An event notification is a complete and well-formed XML
document. Note that <notification> is not an RPC method but
rather the top level element identifying the one way one-way message as a
notification.
Parameters:
Contains notification-specific tagged content. content, if any. The
content of the data tag is beyond the scope of this document.
Response:
No response. Not applicable.
2.3. Terminating the Subscription
Closing of the event notification subscription can be done by
terminating the NETCONF session ( <kill-session> ) or the underlying
transport session. If a stop time is provided when the subscription
is created, then the subscription will terminate after the stop time is
reached. In this case, the NETCONF session will still be an active
session.
3. Supporting Concepts
3.1. Capabilities Exchange
The ability to process and send event notifications is advertised
during the capability exchange between the NETCONF client and server.
3.1.1. Capability Identifier
"urn:ietf:params:netconf:capability:notification:1.0"
3.1.2. Capability Example
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<capabilities>
<capability>
urn:ietf:params:xml:ns:netconf:base:1.0
</capability>
<capability>
urn:ietf:params:netconf:capability:startup:1.0
</capability>
<capability>
urn:ietf:params:netconf:capability:notification:1.0
</capability>
</capabilities>
<session-id>4</session-id>
</hello>
Figure 3
3.2. Event Streams
An event stream is defined as a set of event notifications matching
some forwarding criteria.
The diagram depicted in
Figure 2 illustrates the notification flow and concepts identified in
this document. The following is observed from the diagram below:
System components (c1..cn) generate event notifications which are
passed to a central component for classification and distribution.
The central component inspects each event notification and matches
the event notification against the set of stream definitions. When a
match occurs, the event notification is considered to be a member of
that event stream (stream 1..stream n). An event notification may be
part of multiple event streams.
At some point after the 'NETCONF server' receives the internal event
from a stream, it is converted to an appropriate XML encoding by the
agent, and a <<notification> element is ready to send to all NETCONF
sessions subscribed to that stream.
After generation of the <notification> element, access control is
applied by the agent. If a session does not have permission to
receive the <notification>, then it is discarded for that session,
and processing of the internal event is completed for that session.
When a NETCONF client subscribes to a given event stream, user-
defined filters, filter elements, if applicable, are applied to the event
stream and matching event notifications are forwarded to the NETCONF
server for distribution to subscribed NETCONF clients. For more information on
filters, see section 3.6. A notification logging service may also be available, in which case,
the filter is
transferred from the client to the agent during the <create-
subscription> operation and applied against each <notification>
element generated by the stream. For more information on filtering,
see section 3.6.
A notification logging service may also be available, in which case,
the central component logs notifications. The NETCONF server may
later retrieve logged notifications via the optional replay feature.
For more information on replay, see section 3.3.
+----+
| c1 |----+ available streams
+----+ | +---------+
+----+ | |central |-> stream 1
| c2 | +--->|event |-> stream 2 filter +-------+
+----+ | |processor|-> NETCONF stream ----->|netconf| ----->|NETCONF|
... | | |-> stream n |server |
System | +---------+ +-------+
Components| | /\
... | | ||
+----+ | | (------------) ||
| cn |----+ | (notification) ||
+----+ +-----> ( logging ) ||
( service ) ||
(------------) ||
||
||
\/
+-------+
|netconf|
|NETCONF|
|client |
+-------+
Figure 4 2
3.2.1. Event Stream Definition
Event streams are predefined on the managed device. The
configuration of event streams is outside the scope of this document.
However, it is envisioned that event streams are either pre-
established by the vendor (pre-configured) or (pre-configured), user configurable (e.g.,
part of the device's configuration) or both. Device vendors may
allow event stream configuration via the NETCONF protocol (i.e.,
edit-config operation).
3.2.2. Event Stream Content Format
The contents of all event streams made available to a NETCONF client
(i.e., the notification sent by the NETCONF server) must be encoded
in XML.
3.2.3. Default Event Stream
A NETCONF server implementation supporting the notification
capability must support the "NETCONF" notification event stream.
This stream contains all NETCONF XML event notifications supported by
the NETCONF server. The definition exact string "NETCONF" is used to during
advertisement of stream support during <get> operation on <streams>
and during the <create-subscription> operation. Definition of the
event notifications and their contents for this event stream is
outside the scope of this document.
3.2.4. Event Stream Sources
With the exception of the default event stream (NETCONF
notifications)
notifications), specification of additional event stream sources
(e.g., SNMP, syslog, etc.) syslog) is outside the scope of this document. NETCONF
server implementations may leverage any desired event stream source
in the creation of supported event streams.
3.2.5. Event Stream Discovery
A NETCONF client retrieves the list of supported event streams from a
NETCONF server using the <get> RPC request. operation.
3.2.5.1. Name Retrieval using <get> operation
The list of available event streams is retrieved by requesting the
<eventStreams>
<streams> subtree via a <get> operation. Available event streams for
the requesting session are returned in the reply containing the
<name> and <description> elements, where the <name> element is mandatory
mandatory, and its value is unique within the scope of a NETCONF
server. The returned list must only include the names of
those event streams for which the NETCONF session has sufficient
privileges. The NETCONF session privileges are determined via access
control mechanisms which are beyond the scope of this document. An empty reply is returned if there are no available event
streams. The
Additional information available about a stream include whether
notification replay is retrieved by requesting available and if so, the <eventStreams> subtree via
a <get> operation. timestamp if the
earliest possible notification to replay.
Example: Retrieving the list of available event stream list using
<get> operation:
<rpc message-id="101"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<get>
<filter type="subtree">
<eventStreams xmlns="urn:ietf:params:xml:ns:netmod:notification"/>
<netconf xmlns="urn:ietf:params:xml:ns:netmod:notification">
<streams/>
<netconf>
</filter>
</get>
</rpc>
Figure 5
The NETCONF server returns a list of event streams available for
subscription: NETCONF, SNMP, and syslog-critical in this example.
<rpc-reply message-id="101"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<data>
<eventStreams
<netconf xmlns="urn:ietf:params:xml:ns:netmod:notification">
<streams>
<stream>
<name>NETCONF</name>
<description>Default netconf
<description>default NETCONF event stream
</description>
<replaySupport>true</replaySupport>
<replayLogStartTime>2007-07-08T00:00:00Z</replayLogStartTime>
</stream>
<stream>
<name>SNMP</name>
<description>SNMP notifications</description>
<replaySupport>false</replaySupport>
</stream>
<stream>
<name>syslog-critical</name>
<description>Critical and higher severity
</description>
<replaySupport>true</replaySupport>
<replayLogStartTime>2007-07-01T00:00:00Z</replayLogStartTime>
</stream>
</eventStreams>
</streams>
</netconf>
</data>
</rpc-reply>
Figure 6
3.2.5.2. Event Stream Subscription
A NETCONF client may request from the NETCONF server the list of
event streams available to this session and then issue a <create-
subscription> request with the desired event stream name. Omitting
the event stream name from the <create-subscription> request results
in subscription to the default NETCONF event stream.
3.2.5.2.1. Filtering Event Stream Contents
The set of event notifications delivered in an event stream may be
further refined by applying a user-specified filter supplied at
subscription creation time ( <create-subscription> ). This is a
transient filter associated with the event notification subscription
and does not modify the event stream configuration. Either subtree
or XPATH filtering can be used.
XPATH support for the Notification capability is advertised as part
of the normal XPATH capability advertisement. If XPATH support is
advertised via the XPATH capability then XPATH is supported for
notification filtering and if this capability is not advertised, then
XPATH is not supported for notification filtering.
3.3. Notification Replay
3.3.1. Overview
Replay is the ability to create an event subscription that will
resend recently generated notifications, or in some cases send them
for the first time to a particular NETCONF client. These
notifications are sent the same way as normal notifications.
A replay of notifications is specified by including an optional
parameter (<startTime>) to the subscription command that indicates
the start time of the replay. The end time is specified using the
optional stopTime <stopTime> parameter. If not present, notifications will
continue to be sent until the subscription is terminated.
A notification stream that supports replay is not expected to have an
unlimited supply of saved notifications available to accommodate any
replay request.
The actual number of stored notifications available for retrieval at
any given time is a NETCONF server implementation specific matter.
Control parameters for this aspect of the feature are outside the
scope of the current this document.
Replay is dependent on a notification stream supporting some form of
notification logging, although it puts no restrictions on the size or
form of the log, nor or where it resides within the device. Whether or
not a stream supports replay can be discovered by doing a <get>
operation on the eventStreams <streams> element of the Notification Management
Schema. This schema also provides the replayLogStartTime <replayLogStartTime> element
to indicate the earliest available logged notification.
3.3.2. Creating a Subscription with Replay
This feature uses optional parameters to the <create-subscription>
command called 'startTime' <startTime> and 'stopTime'. 'startTime' <stopTime>. <startTime> identifies the
earliest date and time of interest for event notifications being
replayed and also indicates that a subscription will be providing
replay of notifications. Events generated before this time are not
matched. 'stopTime' <stopTime> specifies the latest date and time of interest
for event notifications being replayed. If it is not present, then
notifications will continue to be sent until the subscription is
terminated.
Note that startTime <startTime> and stopTime <stopTime> are associated with the time an
event was generated by the system. event source.
A replayComplete <replayComplete> notification is sent to indicate that all of the
replay notifications have been sent. If this subscription has a stop
time, then this session becomes a normal NETCONF session again. The
NETCONF server will then accept <rpc> operations. In the case of a
subscription without a stop time, after the
replayComplete <replayComplete>
notification has been sent, it can be expected that any notifications
generated since the start of the subscription creation will be sent sent,
followed by notifications as they arise naturally within the system.
3.3.3. Replay Complete Notification
The replayComplete notification is the last notification sent over a
replay subscription. It indicates that replay is complete. After
this <replayComplete> notification is received the subscription is terminated and the
session becomes normal command-response NETCONF session.
The replayComplete can not cannot be filtered out. It will
always be sent on a relay replay subscription that specified a stop time.
3.4. Notification Management Schema
This Schema is used to learn about the event streams supported on the
system. It also contains the definition of the replayComplete, <replayComplete>
notification, which is sent to indicate that an event replay has sent
all applicable
notifications." notifications.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:ncEvent="urn:ietf:params:netconf:capability:notification:1.0"
xmlns:manageEvent="urn:ietf:params:xml:ns:netmod:notification"
targetNamespace="urn:ietf:params:xml:ns:netmod:notification"
elementFormDefault="qualified"
attributeFormDefault="unqualified">
attributeFormDefault="unqualified"
xml:lang="en" version="1.0">
<xs:annotation>
<xs:documentation xml:lang="en">
A schema that can be used to learn about current
event streams. It also
contains the replayComplete notification.
</xs:documentation>
</xs:annotation>
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/xml.xsd"/>
<xs:import namespace="urn:ietf:params:xml:ns:netconf:base:1.0"
schemaLocation=
"http://www.iana.org/assignments/xml-registry/schema/netconf.xsd"/>
<xs:import namespace=
"urn:ietf:params:netconf:capability:notification:1.0"
schemaLocation=
"http://www.iana.org/assignments/xml-registry/schema/notification.xsd"/>
<!-- The above schemaLocation value is a placeholder and the actual
value will be assigned by IANA -->
<xs:element name="netconf" type="manageEvent:Netconf"/>
<xs:complexType name="Netconf">
<xs:sequence>
<xs:element name="eventStreams" name="streams" >
<xs:annotation>
<xs:documentation>
The list of event streams supported by the
system. When a query is issued, the returned
set of streams is determined based on user
privileges.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence minOccurs="0" minOccurs="1" maxOccurs="unbounded">
<xs:element name="stream">
<xs:annotation>
<xs:documentation>
Stream name and description.
</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="name" type="xs:string"/>
<xs:element name="description"
type="xs:string"/>
<xs:element name="replaySupport"
type="xs:boolean"/>
<xs:element name="replayLogStartTime"
type="xs:dateTime" minOccurs="0">
type="ncEvent:streamNameType">
<xs:annotation>
<xs:documentation>
The start time name of the log used to
support event stream. If this is
the replay function. This
object MUST be present default NETCONF stream, this must have
the value "NETCONF".
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="description"
type="xs:string">
<xs:annotation>
<xs:documentation>
A description of the event stream, including
such information as the type of events that
are sent over this stream.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="replaySupport"
type="xs:boolean">
<xs:annotation>
<xs:documentation>
An indication of whether or not event replay
is available on this stream.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="replayLogStartTime"
type="xs:dateTime" minOccurs="0">
<xs:annotation>
<xs:documentation>
The timestamp of the earliest available
notification in the log used to
support the replay function. This
object MUST be present if replay is
supported.
</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:complexType name="ReplayCompleteNotificationType">
<xs:complexContent>
<xs:extension base="ncEvent:NotificationContentType"/>
</xs:complexContent>
</xs:complexType>
<xs:element name="replayComplete"
type="manageEvent:ReplayCompleteNotificationType"
substitutionGroup="ncEvent:notificationContent">
<xs:annotation>
<xs:documentation>
This notification is sent to signal the end of a replay
portion of a subscription.
</xs:documentation>
</xs:annotation>
</xs:element>
</xs:schema>
Figure 7
3.5. Subscriptions Data
While it may be possible to retrieve information about subscriptions
via a get operation, subscriptions are not stored configuration.
They
Subscriptions are non-persistent state information and their lifetime
is defined by their session.
3.6. Filter Mechanics
When multiple filter elements are specified, they are applied
collectively, so event notifications need to pass all specified
filters
filter elements in order to be sent to the subscriber. If a filter
element is specified to look for data of a particular value, and the
data item is not present within a particular event notification for
its value to be checked against, the notification will be filtered
out. For example, if one were to check for 'severity=critical' in a
configuration event notification where this field was not supported,
then the notification would be filtered out.
The order
For subtree filtering, a non-empty node set means that filter elements are applied does not matter since the
resulting set of notifications is filter
matches. For XPath fitlering, the intersection of mechanisms defined in [XPATH]
should be used to convert the set of
notifications that pass each filtering criteria. returned value to boolean.
3.6.1. Filtering
Filtering is explicitly stated when the event notification
subscription is created. This is specified via the 'filter'
parameter. Filters A Filter only exist as parameters parameter to the subscription.
3.7. Message Flow
The following figure depicts message flow between a NETCONF client
(C) and NETCONF server (S) in order to create a subscription and
begin the flow of notifications. This subscription specified a
<startTime>, so it starts by replaying logged notifications. It is
possible that many rpc/rpc-reply sequences occur before the
subscription is created or after a
stopTime in a replay subscription, created, but this is not depicted in the figure.
C S
| |
| capability exchange |
|-------------------------->|
|<------------------------->|
| |
| <create-subscription> |
|-------------------------->|
|<--------------------------|
| <rpc-reply> |
| |
| <notification> |
|<--------------------------|
| |
| <notification> |
|<--------------------------|
| <notification> | (replayComplete)
|<--------------------------|
| |
| |
| |
| <notification> |
|<--------------------------|
| |
| |
| <notification> |
|<--------------------------|
| |
| |
Figure 8
4. XML Schema for Event Notifications 3
The following [XML Schema] defines figure depicts message flow between a NETCONF Event Notifications.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="urn:ietf:params:netconf:capability:notification:1.0"
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0"
targetNamespace=
"urn:ietf:params:netconf:capability:notification:1.0"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
xml:lang="en">
<!-- import standard XML definitions -->
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/xml.xsd">
<xs:annotation>
<xs:documentation>
This import accesses the xml: attribute groups for the
xml:lang as declared on client
(C) and NETCONF server (S) in order to create a subscription and
begin the error-message element.
</xs:documentation>
</xs:annotation>
</xs:import>
<!-- import base flow of notifications. This subscription specified a
<startTime> and <stopTime> so it starts by replaying logged
notifications and then returns to be a normal command-response
NETCONF session after the <replayComplete> notification is sent and
is available to process <rpc> requests. It is possible that many
rpc/rpc-reply sequences occur before the subscription is created, but
this is not depicted in the figure.
C S
| |
| capability exchange |
|-------------------------->|
|<------------------------->|
| |
| <create-subscription> |
|-------------------------->|
|<--------------------------|
| <rpc-reply> |
| |
| <notification> |
|<--------------------------|
| |
| <notification> |
|<--------------------------|
| <notification> | (replayComplete)
|<--------------------------|
| |
| |
| |
| <rpc> |
|-------------------------->|
|<--------------------------|
| <rpc-reply> |
| |
Figure 4
4. XML Schema for Event Notifications
The following [XML Schema] defines NETCONF Event Notifications.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="urn:ietf:params:netconf:capability:notification:1.0"
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0"
targetNamespace=
"urn:ietf:params:netconf:capability:notification:1.0"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
xml:lang="en">
<!-- import standard XML definitions -->
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/xml.xsd">
<xs:annotation>
<xs:documentation>
This import accesses the xml: attribute groups for the
xml:lang as declared on the error-message element.
</xs:documentation>
</xs:annotation>
</xs:import>
<!-- import base netconf definitions -->
<xs:import namespace="urn:ietf:params:xml:ns:netconf:base:1.0"
schemaLocation=
"http://www.iana.org/assignments/xml-registry/schema/netconf.xsd"/>
<!-- ************** Symmetrical Operations ********************-->
<!-- <create-subscription> operation -->
<xs:complexType name="createSubscriptionType">
<xs:complexContent>
<xs:extension base="netconf:rpcOperationType">
<xs:sequence>
<xs:element name="stream"
type="streamNameType" minOccurs="0">
<xs:annotation>
<xs:documentation>
An optional parameter that indicates
which stream of events is of interest. If
not present, then events in the default
NETCONF stream will be sent.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="filter"
type="netconf:filterInlineType"
minOccurs="0">
<xs:annotation>
<xs:documentation>
An optional parameter that indicates
which subset of all possible events
are
is of interest. The format of this
parameter is the same as that of the
filter parameter in the NETCONF
protocol operations. If not present,
all events not precluded by other
parameters will be sent.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="startTime" type="xs:dateTime"
minOccurs="0" >
<xs:annotation>
<xs:documentation>
A parameter used to trigger the replay
feature and indicates that the replay
should start at the time specified. If
start time is not present, this is not a
replay subscription.
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="stopTime" type="xs:dateTime"
minOccurs="0" >
<xs:annotation>
<xs:documentation>
An optional parameter used with the
optional replay feature to indicate the
newest notifications of interest. If
stop time is not present, the
notifications will continue until the
subscription is terminated. Must be used
with 'startTime'. startTime.
</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:simpleType name="streamNameType">
<xs:annotation>
<xs:documentation>
The name of an event stream.
</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string"/>
</xs:simpleType>
<xs:element name="create-subscription"
type="createSubscriptionType"
substitutionGroup="netconf:rpcOperation">
<xs:annotation>
<xs:documentation>
The command to create a notification subscription. It
takes as argument the name of the notification stream
and filter or profile information. filter. All of those options
limit the content of the subscription. In addition,
there are two time-related parameters startTime and
stopTime which can be used to select the time interval
of interest.
</xs:documentation>
</xs:annotation>
</xs:element>
<!-- ************** One-way Operations ******************-->
<!-- <Notification> operation -->
<xs:complexType name="NotificationContentType"/>
<xs:element name="notificationContent"
type="NotificationContentType" abstract="true"/>
<xs:complexType name="NotificationType">
<xs:sequence>
<xs:element ref="notificationContent"/>
</xs:sequence>
</xs:complexType>
<xs:element name="notification" type="NotificationType"/>
</xs:schema>
Figure 9
5. Filtering Examples
The following section provides examples to illustrate the various
methods of filtering content on an event notification subscription.
5.1. Subtree Filtering
XML subtree filtering is not well suited for creating elaborate
filter definitions given that it only supports equality comparisons
and logical OR operations (e.g., in an event subtree give me all
event notifications which have severity=critical or severity=major or
severity=minor). Nevertheless, it may be used for defining simple
event notification forwarding filters as shown below.
In order to illustrate the use of filter expressions expressions, it is necessary
to assume some of the event notification content. The examples
herein assume that the event notification schema definition has an
<events>
<event> element at the top level that contains one or more child
elements <eventEntry> consisting of the event class (e.g.,
fault, state, config, etc.) config) reporting entity and either severity or
operational state.
Sample event list
<event xmlns="http://example.com/event/1.0">
<eventClass>fault</eventClass>
<reportingEntity>
<card>Ethernet0</card>
</reportingEntity>
<severity>major</severity>
</event>
<event xmlns="http://example.com/event/1.0">
<eventClass>fault</eventClass>
<reportingEntity>
<card>Ethernet2</card>
</reportingEntity>
<severity>critical</severity>
</event>
<event xmlns="http://example.com/event/1.0">
Examples in this section are generated from the following fictional
Schema.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema targetNamespace="http://example.com/event/1.0"
xmlns="http://example.com/event/1.0"
elementFormDefault="qualified"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:ncEvent="urn:ietf:params:netconf:capability:notification:1.0">
<xs:import namespace=
"urn:ietf:params:netconf:capability:notification:1.0"
schemaLocation=
"http://www.iana.org/assignments/xml-registry/schema/notification.xsd"/>
<xs:complexType name="eventType">
<xs:complexContent>
<xs:extension base="ncEvent:NotificationContentType">
<xs:sequence>
<xs:element name="eventClass" />
<xs:element name="reportingEntity">
<xs:complexType>
<xs:sequence>
<xs:any namespace="##any"
processContents="lax"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:choice>
<xs:element name="severity"/>
<xs:element name="operState"/>
</xs:choice>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:element name="event"
type="eventType"
substitutionGroup="ncEvent:notificationContent"/>
</xs:schema>
The above fictional notification definition could results following
is a sample notification list used in the examples in this section.
<notification
xmlns="urn:ietf:params:netconf:capability:notification:1.0">
<event xmlns="http://example.com/event/1.0">
<eventClass>fault</eventClass>
<reportingEntity>
<card>Ethernet0</card>
</reportingEntity>
<severity>major</severity>
</event>
</notification>
<notification
xmlns="urn:ietf:params:netconf:capability:notification:1.0">
<event xmlns="http://example.com/event/1.0">
<eventClass>fault</eventClass>
<reportingEntity>
<card>Ethernet2</card>
</reportingEntity>
<severity>critical</severity>
</event>
</notification>
<notification
xmlns="urn:ietf:params:netconf:capability:notification:1.0">
<event xmlns="http://example.com/event/1.0">
<eventClass>fault</eventClass>
<reportingEntity>
<card>ATM1</card>
</reportingEntity>
<severity>minor</severity>
</event>
</notification>
<notification
xmlns="urn:ietf:params:netconf:capability:notification:1.0">
<event xmlns="http://example.com/event/1.0">
<eventClass>state</eventClass>
<reportingEntity>
<card>Ethernet0</card>
</reportingEntity>
<operState>enabled</operState>
</event>
Figure 10
</notification>
5.1. Subtree Filtering
XML subtree filtering is not well-suited for creating elaborate
filter definitions given that it only supports equality comparisons
and application of the logical OR operators (e.g., in an event
subtree give me all event notifications which have severity=critical
or severity=major or severity=minor). Nevertheless, it may be used
for defining simple event notification forwarding filters as shown
below.
The following example illustrates selecting how to select events which have
severities of critical, major, or minor (presumably fault events).
The filtering criteria evaluation is as follows:
((severity=critical) | (severity=major) | (severity=minor))
<netconf:rpc netconf:message-id="101"
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
<create-subscription
xmlns="urn:ietf:params:netconf:capability:notification:1.0">
<filter netconf:type="subtree">
<event xmlns="http://example.com/event/1.0">
<eventClass>fault</eventClass>
<severity>critical</severity>
</event>
<event xmlns="http://example.com/event/1.0">
<eventClass>fault</eventClass>
<severity>major</severity>
</event>
<event xmlns="http://example.com/event/1.0">
<eventClass>fault</eventClass>
<severity>minor</severity>
</event>
</filter>
</create-subscription>
</netconf:rpc>
Figure 11
The following example illustrates selecting how to select state or config
EventClasses or fault events that are related to card Ethernet0. The
filtering criteria evaluation is as follows:
( state | config | ( fault & card=Ethernet0) ( severity=critical | severity=major |
severity = minor | card=Ethernet0)))
<netconf:rpc netconf:message-id="101"
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
<create-subscription
xmlns="urn:ietf:params:netconf:capability:notification:1.0">
<filter netconf:type="subtree">
<event xmlns="http://example.com/event/1.0">
<eventClass>fault</eventClass>
</event>
<event xmlns="http://example.com/event/1.0">
<eventClass>state</eventClass>
</event>
<event xmlns="http://example.com/event/1.0">
<eventClass>config</eventClass>
</event>
<event xmlns="http://example.com/event/1.0">
<eventClass>fault</eventClass>
<reportingElement>
<card>Ethernet0</card>
</reportingElement>
</event>
</filter> netconf:type="xpath"
xmlns:ex="http://example.com/event/1.0"
select="/ex:event[
(ex:eventClass='state' or
ex:eventClass='config' or
ex:eventClass='fault') and
(ex:severity='minor' or
ex:severity='major' or
ex:severity='critical' or
ex:reportingEntity/ex:card='Ethernet0')]/>
</create-subscription>
</netconf:rpc>
5.2. XPATH filters
The following [XPATH] example illustrates selecting how to select fault
EventClass notifications that have severities of critical, major, or
minor. The filtering criteria evaluation is as follows:
((fault) & ((severity=critical) | (severity=major) | (severity =
minor)))
<netconf:rpc netconf:message-id="101"
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
<create-subscription
xmlns="urn:ietf:params:netconf:capability:notification:1.0">
<filter netconf:type="xpath"
xmlns:ex="http://example.com/event/1.0"
select="/ex:event[ex:eventClass='fault' and
(ex:severity='minor' or ex:severity='major'
or ex:severity='critical')]"/>
</create-subscription>
</netconf:rpc>
Figure 13
The following example illustrates selecting how to select state and config
EventClasses or fault events that have severities of critical, major,
or minor or come from card Ethernet0. The filtering criteria
evaluation is as follows:
(( state | config) & ((fault & severity=critical) | (fault &
severity=major) | (fault & severity = minor) | (fault &
card=Ethernet0)))
<netconf:rpc netconf:message-id="101" message-id="101"
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
<create-subscription
xmlns="urn:ietf:params:netconf:capability:notification:1.0">
<filter netconf:type="xpath"
xmlns:ex="http://example.com/event/1.0"
select="/ex:event[
ex:eventClass='fault'
(ex:eventClass='state' or ex:eventClass='config') and ex:severity='minor')
((ex:eventClass='fault' and ex:severity='critical') or
(ex:eventClass='fault' and ex:severity='major') or
ex:eventClass='fault'
(ex:eventClass='fault' and ex:severity='critical') ex:severity='minor') or
(ex:eventClass='fault' and
ex:reportingElement/ex:card='Ethernet0') or
ex:eventClass='state' or
ex:eventClass='config']"/> ex:card='Ethernet0'))]"/>
</create-subscription>
</netconf:rpc>
Figure 14
6. Security Considerations
The security considerations from the base [NETCONF] document apply also
apply to the Notification capability.
The access control framework and the choice of transport will have a
major impact on the security of the solution.
The <notification> elements are never sent before the transport layer
and the netconf NETCONF layer (capabilities exchange) have been established,
and the manager has been identified and authenticated.
It is recommended that care be taken to ensure the secure operation
of the following commands: execution:
o <create-subscription> invocation
o <get> on read-only data models
o read-write data models
o notification <notification> content
One issue related to the notifications draft is the transport of data from non-netconf non-NETCONF streams, such as
syslog and SNMP. This data may be more vulnerable (or is not more
vulnerable) when being transported over netconf NETCONF than when being
transported using the protocol normally used for transporting it,
depending on the security credentials of the two subsystems. The
NETCONF server is responsible for providing applying access control to stream
content.
The contents of notifications as well as the name of event streams
may contain sensitive information and care should be taken to ensure
that it is viewed only by authorized users. If a user does not have
permission to view content via other NETCONF
operations operations, it does not
have permission to access that content via Notifications. If a user
is not permitted to view one element in the content of the
notification, the notification is not sent to that user.
If a subscription is created with a stopTime, <stopTime>, the NETCONF session
will return to being a normal command-response NETCONF session when
the replay is completed. It is the responsibility of the NETCONF
client to close off this session when it is no longer of use.
7. IANA Considerations
This document registers two three URIs for the NETCONF XML namespace in
the IETF XML registry [RFC3688].
Following the format in RFC 3688, IANA has made the following
registration.
URI: urn:ietf:params:netconf:capability:notification:1.0
URI: urn:ietf:params:xml:ns:netmod:notification
URI: urn:ietf:params:xml:ns:netconf:notification
Registrant Contact: The IESG.
XML: N/A, the requested URI is an XML namespace.
8. Acknowledgements
Thanks to Gilbert Gagnon, Greg Wilbur and Kim Curran for providing
their input into the early work on this document. In addition, the
editors would like to acknowledge input at the Vancouver editing
session from the following people: Orly Nicklass, James Balestriere,
Yoshifumi Atarashi, Glenn Waters, Alexander Clemm, Dave Harrington,
Dave Partain, Ray Atarashi and Dave David Perkins and the following
additional people from the Montreal editing session: Balazs Lengyel,
Phil Shafer, Rob Enns, Andy Bierman, Dan Romascanu, Bert Wijnen,
Simon Leinen, Juergen Schoenwaelder, Hideki Okita, Vincent Cridlig,
Martin Bjorklund, Olivier Festor, Radu State, Brian Trammell, William
Chow. We would also like to thank Li Yan for his numerous reviews.
9. Normative References
[NETCONF] Enns, R., "NETCONF Configuration Protocol", RFC 4741,
December 2006.
[RFC2026] Bradner, S., "The Internet Standards Process -- Revision
3", RFC 2026, BCP 9, October 1996.
[RFC2119] Bradner, s., "Key words for RFCs to Indicate Requirements
Levels", RFC 2119, March 1997.
[RFC2223] Postel, J. and J. Reynolds, "Instructions to RFC Authors",
RFC 2223, October 1997.
[RFC3688] Bradner, s., "The IETF XML Registry", RFC 3688, January
2004.
[XML] World Wide Web Consortium, "Extensible Markup Language
(XML) 1.0", W3C XML, February 1998,
<http://www.w3.org/TR/1998/REC-xml-19980210>.
[XML Schema]
Fallside, D. and P. Walmsley, "XML Schema Part 0: Primer
Second Edition", W3C XML Schema, October 2004.
[XPATH] Clark, J. and S. DeRose, "XML Path Language (XPath)
Version 1.0",
W3C http://www.w3.org/TR/1999/REC-xpath-19991116,
November 1999.
Appendix A. Change Log
A.1. Version -08
1. Removed named profiles
2. Removed eventClass that was accidentally included in the
definition of the replayComplete notification
3. Deleted data wrapper from notification
4. Changed replayLogStartTime to have a minOccurs of 0. It will
only be there when replay is supported. Verify examples in
section 3.2.5.1 are correct with respect to this element.
5. Error codes in section 2.1.1, fixed formatting issue
6. Moved replayComplete to not be under <netconf>
7. Section 2.1, fixed capitalization
8. In figure 4, the line was pushed out by 'system components',
fixed this.
9. On page 8, replaced "If the startTime specified is earlier then
the" with 'If the startTime specified is earlier than the"
10. Updated some name spaces and schemaLocations as per Andy's June
3rd email.
11. Added discussion of replayLogStartTime to draft in section 3.3.1
as follows "Whether or not a stream supports replay can be
discovered by doing a <get> operation on the eventStreams <streams> elements
of the Notification Management Schema. This schema also
provides the replayLogStartTime element to indicate the earliest
available logged notification."
12. Removed most of the uses of the phrase 'Note that'. I kept two
uses that prevent sentences from starting with either a lower
case letter or an angle bracket.
13. In section 3.6 replaced "it will be filtered out" with "the
notification will be filtered out"
14. In section 3.4, replaced "and the query" with "and to query"
15. Replaced 3 instances of "replay complete notification" with
"replayComplete notification"
16. In section 3.3.2, replaced "normal NETCONF session" with "normal
command-response NETCONF session"
17. In section 3.3.1, replaced "create an event subscription that
will resend recently generated notification" with "create an
event subscription that will resend recently generated
notification, or is some cases send them for the first time to a
particular NETCONF client."
18. In section 3.2.5.2, s/available event streams to/event streams
available to/
19. In one spot, changed snmp to SNMP (the other gets deleted)
20. In section 3.2.5.1 s/where <name> element is/where the <name>
element is/
21. In section 3.2.5.1, clarified that "value is unique" - within
the scope of a NETCONF server.
22. In section 2.1.1, clarified that stopTime cannot preceded start
time.
23. In section 2.1.1, in Start Time s/indicates/indicate/
24. In section 2.1.1, in Filter: s/This is mutually exclusive/The
filter parameter is mutually exclusive/ ("this" could refer to
the behavior described in the previous sentence.)
25. In section 1.4, third bullet, replaced "syslog and SNMP are
rather constrained in terms of message sizes)" with (ie, not too
short)
26. In section 1.4, made all bullets start with capital leters.
27. Added definition of Filter to section 1.1
28. In section 1.1, improved the definition of subscription with "An
agreement and method to receive event notifications over a
NETCONF session."
29. In section 1.1, in the definition of operation, added a
reference to [NETCONF].
30. Created a change log section
31. Fixed reference to IETF XML Registry in IANA Considerations
section.
32. In section 3.3.3, deleted "This notification will only be sent
if a 'stopTime' was specified when the replay subscription was
created."
33. Added text to the security considerations section that says "If
a subscription is created with a stopTime, the NETCONF session
will return to being a normal command-response NETCONF session
when the replay is completed. It is the responsibility of the
NETCONF client to close off this session when it is no longer of
use".
34. Update examples in section 5 to get rid of extra wrapper tag.
35. In section 2.1, replace "A NETCONF server is not required to
process RPC requests on the session associated with the
subscription until the notification subscription is done and may
silently discard these requests." with "A NETCONF server is will
not read RPC requests, by default, on the session associated
with the subscription until the notification subscription is
done.
36. Updated the notification definition and the replyComplete
notification definition to use a substitution group.
A.2. Version -09
1. In section 5.1 "logical OR operation" -> "application of the
logical OR operator"
2. In section 6 "ensure the secure operation of the following
commands" -> "secure execution"
3. Removed a couple remaining references to named profiles.
4. Updated name datatype in eventStreams element.
5. Modified the cardinality of eventStreams to reflect that there
will always be at least one event stream.
6. Fixed description of examples to remove reference to eventEntry,
which is no longer part of the actual example.
7. In examples, for consistency changed some references to
reportingElement to be reportingEntity
8. Fixed section 3.2, third pararaph to talk about filter elements
instead of filters.
9. Merge section 3.3.2 and section 3.3.3. Delete the first
paragraph in (old) section 3.3.3 since it both duplicates and
contradicts text in section 3.3.2
10. In section 3.2.5.2.1, added clarification to first paragraph
that "Either subtree or XPATH filtering can be used. "
11. Removed discussion of not allowing the return of stream names
for which the user does not have permissions from the body of
the document to the security considerations section.
12. Fixed typos and did wordsmithing in various parts of the
document.
13. In section 2.1, explicitly stated that a subscription is bound
to a single stream for the lifetime of the subscription.
14. removed single quotes around some instances of stopTime and
startTime for consistency. When appropriate, put between angle
brackets.
15. In section 2.1.1, changed "Error-info: <badElement>: startTime"
to use bad-element.
16. In section 2.2.1, under the parameter tag, replaced "Contains
notification-specific tagged content." with "Contains
notification-specific tagged content, if any. "
17. Clarified some text in section 3.2, paragraph 3 around sending
of filters from client and the fitlers later being applied to
the notifications.
18. Fixed target namespace in section 4.
19. Added missing lang and version information to schema in section
3.4
20. Clarified that the examples in section 5 all used the same
example event list.
21. Cleaned up security considerations section.
22. In section 3.4, clarified the definition of replayLogStart time
to be the timestamp of the earliest available notification in
the log used to support the replay function in the description
tag for the object definition.
23. In section 3.3.2, clarified that the time an event was generated
by the system means time an event was generated by the event
source.
24. In section 3.5, deleted discussion about possibly defining
subscriptions in XML Schema.
25. In section 3.6, deleted discussion about filter element
execution order not mattering.
26. Fixed examples in section 5 to add <netconf> tag and to make
other corrections
27. Added XML Schema definition for examples in section 5 and showed
the event list with <notification> wrappers.
Authors' Addresses
Sharon Chisholm
Nortel
3500 Carling Ave
Nepean, Ontario K2H 8E9
Canada
Email: schishol@nortel.com
Hector Trevino
Cisco
Suite 400
9155 E. Nichols Ave
Englewood, CO 80112
USA
Email: htrevino@cisco.com
Full Copyright Statement
Copyright (C) The IETF Trust (2007).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgment
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).