|
Dear all, Here is a text proposal for the issue 8 PROTO-08 Instead of sending the input sequence number for each selector ID, a counter64 value, associated with every packet, the working group should discuss the possibility to send the information on regular basis with an option template record. Specifically in the case of Composite Selector, we would send multiple times a 64-bit counter in each packet. Regards, Benoit.7.4.3 Selection Sequence Statistics Report Interpretation A Selector MAY be used in multiple Selection Sequences. However, each use of a Selector must be independent, so each separate logical instance of a Selector MUST maintain its own individual Selection State and statistics. The Selection Sequence Statistics Report Interpretation MUST include the number of observed packets (Population Size) and the number of packets selected (Sample Size) by each instance of its Primitive Selectors. Within a Selection Sequence composed of several Primitive Selectors, the number of packets selected for one Selector is equal to the number of packets observed by the next Selector. The order of the Selectors in the Selection Sequence Statistics Report Interpretation MUST match the order of the Selectors in the Selection Sequence. For every Selection Sequence, the PSAMP Device MUST periodically export a Selection Sequence Statistics Report Interpretation using an Options Template containing the following Information Elements: Scope: selectionSequenceId Non-scope: packetsObserved packetsSelected (first) … packetsSelected (last) The packetsObserved Information Element [PSAMP-INFO] MUST contain the number of packets seen at the Observation Point, and as a consequence passed to the first Selector in the Selection Sequence. The packetsSelected Information Element [PSAMP-INFO] contains the number of packets selected by a Selector in the Selection Sequence. The Attained Selection Fraction for the Selection Sequence is calculated by dividing the number of observed packets (packetsObserved Information Element) by the value of selected packets (packetsSelected Information Element) for the last Selector. The Attained Selection Fraction can be calculated for each Selector by dividing the number of packets selected for that Selector by the value for the previous Selector. The statistics for the whole sequence SHOULD be taken at a single logical point in time, the input value for a Selector MUST equal the output value of the previous selector. The Selection Sequence Statistics Report Interpretation MUST be exported periodically[CSI1] . Example of Selection Sequence [CSI2] Statistics Report Interpretation: Selection Sequence 7 (Filter->Sampling): Observed 100 (observationPointId 1, Interface 5) Selected 50 (selectorId 5, match IPV4SourceAddress 10.0.0.1) Selected 6 (selectorId 10, Sampler: Random one out-of ten) Selection Sequence 9 (Sampling->Filtering): Observed 100 (observationPointId 1, Interface 5) Selected 10 (selectorId 10, Sampler: Random one out-of ten) Selected 3 (selectorId 5, match IPV4SourceAddress 10.0.0.1) IPFIX Options Template Record: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Set ID = 3 | Length = 26 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Template ID = 267 | Field Count = 4 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Scope Field Count = 1 |0| selectionSequenceId = 301 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Scope 1 Length = 4 |0| packetsObserved = 318 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Field Length = 4 |0| packetsSelected = 319 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Field Length = 4 |0| packetsSelected = 319 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Field Length = 4 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The associated IPFIX Data Record: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Set ID = 267 | Length = 36 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 7 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 100 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 50 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 6 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 9 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 100 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 10 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 3 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+Figure K: Example of the Selection Sequence Statistics Report Interpretation Notes: * The Attained Packet Fractions for Selection Sequence 7 are: Filter 10: 50/100 Sampler 5: 6/50 Number of samples selected: 6 * The Attained Packet Fractions for Selection Sequence 9 are: Sampler 5: 10/100 Filter 10: 3/10 Number of samples selected: 3 7.3.1 Basic Packet Reports For each selected packet, the Packet Report MUST contain the following information: - The selectionSequenceId Information Element - Some number of contiguous bytes from the start of the packet, including the packet header (which includes link layer, network layer and other encapsulation headers) and some subsequent bytes of the packet payload. Alternatively, the number of contiguous bytes may start at the beginning of the payload. The dataLinkFrameSection, mplsLabelStackSection, mplsPayloadPacketSection, ipPacketSection, and ipPayloadPacketSection PSAMP Information Elements are available for this use. In the Packet Report, the PSAMP device MUST be capable of exporting the number of observed packets and the number of packets selected by each instance of its Primitive Selectors (as described by the non scope Information Element of the Selection Sequence Statistics Report Interpretation) although it MAY be a configurable option not to include them. If exported, the Attained Selection Fraction may be calculated precisely for the Observed Packet Stream. The Packet Report MAY include only the final selector packetSelected, to act as an index for that selection sequence in the Selection Sequence Statistics Report Interpretation, which also allows the calculation of the Attained Selection Fraction. The contiguous Information Elements ... |