RE: FW: I-D ACTION:draft-salowey-radext-delegated-prefix-00.txt

["Glen Zorn \(gwz\)" <gwz@cisco.com>]

Bernard Aboba <> supposedly scribbled:

>> [Joe] My understanding is that Framed-IPv6-Prefix causes a route to
>> be added in the NAS and I would expect that route to be advertised
>> in a Router Advertisement messages.
> 
> RFC 3162 Section 2.3 states about Framed-IPv6-Prefix:
> 
> "     This Attribute indicates an IPv6 prefix (and corresponding
>       route) to be configured for the user. "
> 
> For Framed-IPv6-Route, RFC 3162, Section 2.5 states:
> 
> "     This Attribute provides routing information to be configured for
>       the user on the NAS.  It is used in the Access-Accept packet and
>       can appear multiple times."
> 
> RFC 2865, Section 5.10 describes Framed-Routing:
> 
> "     This Attribute indicates the routing method for the user, when
>       the user is a router to a network.  It is only used in
>       Access-Accept packets."
> 
> Based on this, I think Framed-IPv6-Prefix causes a route to be added
> on the NAS and advertised to the user via Router Advertisement, but
> not via routing packets (e.g. RIPv2) unless indicated in
> Framed-Routing.  

I'm inclined to agree. 

Hope this helps,

~gwz

Why is it that most of the world's problems can't be solved by simply
  listening to John Coltrane? -- Henry Gabriel

--
to unsubscribe send a message to radiusext-request@ops.ietf.org with
the word 'unsubscribe' in a single line as the message text body.
archive: <http://psg.com/lists/radiusext/>