[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Radius Dyn auth MIBs with the updates



All,
 
I've attached the revised  Dyn Auth client and server drafts. Could you please review if these are inline with your suggestions.
 
Here is a brief summary of changes for your quick reference
 
1. Replaced with "itself" in the cleint draft. Server draft was fine.

2. Added a new time stamp scalar. Juergen suggestion of having scalars group is helpful here.

- Incremented the number of scalars in the Overview sections

- Referred to this new object while updating the counter objects

- Mentioned the same in Compliance

Here is the definition of the time stamp scalar. The same follows for the other draft.

radiusDynAuthClientCounterDiscontinuity OBJECT-TYPE
          SYNTAX TimeTicks
          UNITS  "hundredths of a second"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION

                "The time (in hundredths of a second) since the
                 DAC module was last re-initialized."
          ::= { radiusDynAuthClientScalars 3 }

Each counter object has got a new sentence that says the below.

"This counter may experience a discontinuity when the DAC module (re)starts as indicated by the value of radiusDynAuthClientCounterDiscontinuity."

3. "Port number 0 is invalid" mentioned for radiusDynAuthServerClientPortNumber  object

4. Compliance statements now say that we only support IPv4 and IPV6 5. InetAddress objects are updated with what InetAddressType object determines the address

Here is the compliance statement and the new objects.

radiusDynAuthClientMIBCompliance MODULE-COMPLIANCE
       STATUS  current
       DESCRIPTION
             "The compliance statement for entities implementing
              the RADIUS Dynamic Authorization Client. Implementation
        of this module is for entities that support IPv6, or
        support IPv4 and IPv6."
       MODULE  -- this module
       MANDATORY-GROUPS { radiusDynAuthClientMIBGroup }

       OBJECT        radiusDynAuthServerAddressType
       SYNTAX        InetAddressType { ipv4(1), ipv6(2) }
       DESCRIPTION
           "An implementation is only required to support IPv4 and
            globally unique IPv6 addresses."

       OBJECT        radiusDynAuthServerAddress
       SYNTAX        InetAddress (SIZE(4|16))
       DESCRIPTION
           "An implementation is only required to support IPv4 and
            globally unique IPv6 addresses."


       GROUP              radiusDynAuthClientAuthOnlyGroup
       DESCRIPTION
             "Only required for Dynamic Authorization Clients that
              are supporting Service-Type attributes with value
              'Authorize-Only'."

 
       GROUP              radiusDynAuthClientNoSessGroup
       DESCRIPTION
             "This group is not required in case the Dynamic
              Authorization Server can not easily determine whether
              a session exists or not (e.g., in case of a RADIUS
              proxy)."

       ::= { radiusDynAuthClientMIBCompliances 1 }

 

Thanks

Nagi

 

 
 
 
 



Network Working Group                                      S. De Cnodder
Internet-Draft                                                   Alcatel
Expires: September 23, 2006                                   N. Jonnala
                                                                M. Chiba
                                                     Cisco Systems, Inc.
                                                          March 22, 2006


                    Dynamic Authorization Client MIB
              draft-ietf-radext-dynauth-client-mib-05.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on September 23, 2006.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes the Remote Authentication Dial In User
   Service (RADIUS) [RFC2865] Dynamic Authorization Client (DAC)
   functions that support the dynamic authorization extensions as
   defined in RFC 3576.



De Cnodder, et al.     Expires September 23, 2006               [Page 1]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
     1.1.  Requirements notation  . . . . . . . . . . . . . . . . . .  3
     1.2.  Terminology  . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  The Internet-Standard Management Framework . . . . . . . . . .  4
   3.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
   4.  RADIUS Dynamic Authorization Client MIB Definitions  . . . . .  6
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . . 23
   6.  IANA considerations  . . . . . . . . . . . . . . . . . . . . . 25
   7.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 26
   8.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 27
     8.1.  Normative References . . . . . . . . . . . . . . . . . . . 27
     8.2.  Informative References . . . . . . . . . . . . . . . . . . 27
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 29
   Intellectual Property and Copyright Statements . . . . . . . . . . 30



































De Cnodder, et al.     Expires September 23, 2006               [Page 2]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


1.  Introduction

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   It is becoming increasingly important to support Dynamic
   Authorization extensions on the network access server (NAS) devices
   to handle the Disconnect and Change-of-Authorization (CoA) messages
   as described in [RFC3576].  As a result, the effective management of
   RADIUS Dynamic Authorization entities is of considerable importance.
   This RADIUS Dynamic Authorization Client MIB complements the managed
   objects used for managing RADIUS authentication and accounting
   servers as described in [RFC2619bis] and [RFC2621bis], respectively.


   -- RFC Ed.: references [DYNSERV], [RFC2619bis], [RFC2621bis] should
   --          be replaced by references to the corresponding RFC.

1.1.  Requirements notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

1.2.  Terminology

   Dynamic Authorization Server (DAS)

   The component that resides on the NAS which processes the Disconnect
   and Change-of-Authorization (CoA) Request packets [RFC3576] sent by
   the Dynamic Authorization Client.

   Dynamic Authorization Client (DAC)

   The component which sends Disconnect and CoA-Request packets to the
   Dynamic Authorization Server.  While often residing on the RADIUS
   server, it is also possible for this component to be located on a
   separate host, such as a Rating Engine.

   Dynamic Authorization Server Port

   The UDP port on which the Dynamic Authorization Server listens for
   the Disconnect and CoA requests sent by the Dynamic Authorization
   Client.








De Cnodder, et al.     Expires September 23, 2006               [Page 3]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


2.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC2578 [RFC2578], STD 58, RFC2579 [RFC2579] and STD 58, RFC2580
   [RFC2580].





































De Cnodder, et al.     Expires September 23, 2006               [Page 4]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


3.  Overview

   "Dynamic Authorization Extensions to RADIUS" [RFC3576] defines the
   operation of Disconnect-Request, Disconnect-ACK, Disconnect-NAK, CoA-
   Request, CoA-ACK and CoA-NAK packets.  [DYNSERV] defines the Dynamic
   Authorization Server MIB and the relationship with other MIB modules.
   This MIB module for the Dynamic Authorization Client contains the
   following:

   1.  Three scalar objects, and

   2.  One Dynamic Authorization Server table.  This table contains one
   row for each DAS that the DAC shares a secret with.






































De Cnodder, et al.     Expires September 23, 2006               [Page 5]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


4.  RADIUS Dynamic Authorization Client MIB Definitions

   RADIUS-DYNAUTH-CLIENT-MIB DEFINITIONS ::= BEGIN

   IMPORTS
          MODULE-IDENTITY, OBJECT-TYPE,
          Counter32, Gauge32, Integer32,
          mib-2, TimeTicks    FROM SNMPv2-SMI         -- [RFC2578]
          SnmpAdminString     FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
          InetAddressType, InetAddress,
          InetPortNumber      FROM INET-ADDRESS-MIB   -- [RFC4001]
          MODULE-COMPLIANCE,
          OBJECT-GROUP        FROM SNMPv2-CONF;       -- [RFC2580]

   radiusDynAuthClientMIB MODULE-IDENTITY
          LAST-UPDATED "200603220000Z" -- 22 March 2006
          ORGANIZATION "IETF RADEXT Working Group"
          CONTACT-INFO
                 " Stefaan De Cnodder
                   Alcatel
                   Francis Wellesplein 1
                   B-2018 Antwerp
                   Belgium

                   Phone: +32 3 240 85 15
                   EMail: stefaan.de_cnodder@alcatel.be

                   Nagi Reddy Jonnala
                   Cisco Systems, Inc.
                   Divyasree Chambers, B Wing,
                   O'Shaugnessy Road,
                   Bangalore-560027, India.

                   Phone: +91 94487 60828
                   EMail: njonnala@cisco.com

                   Murtaza Chiba
                   Cisco Systems, Inc.
                   170 West Tasman Dr.
                   San Jose CA, 95134

                   Phone: +1 408 525 7198
                   EMail: mchiba@cisco.com "
          DESCRIPTION
              "The MIB module for entities implementing the client
               side of the Dynamic Authorization Extensions to Remote
               Authentication Dial In User Service (RADIUS) protocol.




De Cnodder, et al.     Expires September 23, 2006               [Page 6]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


               Copyright (C) The Internet Society (2006).  Initial
               version as published in RFC yyyy;
               for full legal notices see the RFC itself."
   -- RFC Ed.: replace yyyy with actual RFC number & remove this note

          REVISION "200603220000Z" -- 22 March 2006
          DESCRIPTION "Initial version as published in RFC yyyy"
   -- RFC Ed.: replace yyyy with actual RFC number & remove this note
          ::= { mib-2 xxx }
   -- The value xxx to be assigned by IANA.

   radiusDynAuthClientMIBObjects OBJECT IDENTIFIER ::=
                                         { radiusDynAuthClientMIB 1 }

   radiusDynAuthClientScalars    OBJECT IDENTIFIER ::=
                                  { radiusDynAuthClientMIBObjects 1 }

   radiusDynAuthClientDisconInvalidServerAddresses OBJECT-TYPE
          SYNTAX Counter32
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of Disconnect-Ack and Disconnect-NAK packets
                 received from unknown addresses. This counter may
                 experience a discontinuity when the DAC module
                 (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          ::= { radiusDynAuthClientScalars 1 }

   radiusDynAuthClientCoAInvalidServerAddresses OBJECT-TYPE
          SYNTAX Counter32
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of CoA-Ack and CoA-NAK packets received from
                 unknown addresses. Disconnect-NAK packets received from
                 unknown addresses. This counter may experience a
                 discontinuity when the DAC module (re)starts as
                 indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          ::= { radiusDynAuthClientScalars 2 }

   radiusDynAuthClientCounterDiscontinuity OBJECT-TYPE
          SYNTAX TimeTicks
          UNITS  "hundredths of a second"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION



De Cnodder, et al.     Expires September 23, 2006               [Page 7]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


                "The time (in hundredths of a second) since the
                 DAC module was last re-initialized."
          ::= { radiusDynAuthClientScalars 3 }

   radiusDynAuthServerTable OBJECT-TYPE
          SYNTAX SEQUENCE OF RadiusDynAuthServerEntry
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "The (conceptual) table listing the RADIUS Dynamic
                 Authorization Servers with which the client shares a
                 secret."
          ::= { radiusDynAuthClientMIBObjects 2 }

   radiusDynAuthServerEntry OBJECT-TYPE
          SYNTAX     RadiusDynAuthServerEntry
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "An entry (conceptual row) representing one Dynamic
                 Authorization Server with which the client shares a
                 secret."
          INDEX      { radiusDynAuthServerIndex }
          ::= { radiusDynAuthServerTable 1 }

   RadiusDynAuthServerEntry ::= SEQUENCE {
          radiusDynAuthServerIndex                     Integer32,
          radiusDynAuthServerAddressType               InetAddressType,
          radiusDynAuthServerAddress                   InetAddress,
          radiusDynAuthServerClientPortNumber          InetPortNumber,
          radiusDynAuthServerID                        SnmpAdminString,
          radiusDynAuthClientRoundTripTime             TimeTicks,
          radiusDynAuthClientDisconRequests            Counter32,
          radiusDynAuthClientDisconAuthOnlyRequests    Counter32,
          radiusDynAuthClientDisconRetransmissions     Counter32,
          radiusDynAuthClientDisconAcks                Counter32,
          radiusDynAuthClientDisconNaks                Counter32,
          radiusDynAuthClientDisconNakAuthOnlyRequest  Counter32,
          radiusDynAuthClientDisconNakSessNoContext    Counter32,
          radiusDynAuthClientMalformedDisconResponses  Counter32,
          radiusDynAuthClientDisconBadAuthenticators   Counter32,
          radiusDynAuthClientDisconPendingRequests     Gauge32,
          radiusDynAuthClientDisconTimeouts            Counter32,
          radiusDynAuthClientDisconPacketsDropped      Counter32,
          radiusDynAuthClientCoARequests               Counter32,
          radiusDynAuthClientCoAAuthOnlyRequest        Counter32,
          radiusDynAuthClientCoARetransmissions        Counter32,
          radiusDynAuthClientCoAAcks                   Counter32,



De Cnodder, et al.     Expires September 23, 2006               [Page 8]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


          radiusDynAuthClientCoANaks                   Counter32,
          radiusDynAuthClientCoANakAuthOnlyRequest     Counter32,
          radiusDynAuthClientCoANakSessNoContext       Counter32,
          radiusDynAuthClientMalformedCoAResponses     Counter32,
          radiusDynAuthClientCoABadAuthenticators      Counter32,
          radiusDynAuthClientCoAPendingRequests        Gauge32,
          radiusDynAuthClientCoATimeouts               Counter32,
          radiusDynAuthClientCoAPacketsDropped         Counter32,
          radiusDynAuthClientUnknownTypes              Counter32
   }


   radiusDynAuthServerIndex OBJECT-TYPE
          SYNTAX     Integer32 (1..2147483647)
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "A number uniquely identifying each RADIUS Dynamic
                 Authorization Server with which this Dynamic
                 Authorization Client communicates. This number is
                 allocated by the agent implementing this MIB module,
                 and is unique in this context."
          ::= { radiusDynAuthServerEntry 1 }

   radiusDynAuthServerAddressType OBJECT-TYPE
          SYNTAX     InetAddressType
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The type of IP address of the RADIUS Dynamic
                 Authorization Server referred to in this table entry."
          ::= { radiusDynAuthServerEntry 2 }

   radiusDynAuthServerAddress OBJECT-TYPE
          SYNTAX     InetAddress
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The IP address value of the RADIUS Dynamic
                 Authorization Server referred to in this table entry
                 using the version neutral IP address format. The type
                 of this address is determined by the value of the
                 radiusDynAuthServerAddressType object."
          ::= { radiusDynAuthServerEntry 3 }

   radiusDynAuthServerClientPortNumber OBJECT-TYPE
          SYNTAX     InetPortNumber
          MAX-ACCESS read-only



De Cnodder, et al.     Expires September 23, 2006               [Page 9]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


          STATUS     current
          DESCRIPTION
                "The UDP destination port that the RADIUS Dynamic
                 Authorization Client is using to send requests to this
                 server. The value zero is invalid."
          ::= { radiusDynAuthServerEntry 4 }


   radiusDynAuthServerID OBJECT-TYPE
          SYNTAX     SnmpAdminString
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The NAS-Identifier of the RADIUS Dynamic Authorization
                 Server referred to in this table entry. This is not
                 necessarily the same as sysName in MIB II."
          REFERENCE
                "RFC 2865, Section 5.32, NAS-Identifier."
          ::= { radiusDynAuthServerEntry 5 }

   radiusDynAuthClientRoundTripTime OBJECT-TYPE
          SYNTAX     TimeTicks
          UNITS      "hundredths of a second"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The time interval (in hundredths of a second) between
                 the most recent Disconnect or CoA request and the
                 reception of the corresponding Disconnect or CoA reply.
                 A value of zero is returned in case no reply has been
                 received yet from this server."
          ::= { radiusDynAuthServerEntry 6 }

   radiusDynAuthClientDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Requests sent
                 to this Dynamic Authorization Server. This also
                 includes the RADIUS Disconnect-Requests that have a
                 Service-Type attribute with value 'Authorize Only'.
                 Disconnect-NAK packets received from unknown addresses.
                 This counter may experience a discontinuity when the
                 DAC module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE



De Cnodder, et al.     Expires September 23, 2006              [Page 10]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 7 }

   radiusDynAuthClientDisconAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Requests that include a
                 Service-Type attribute with value 'Authorize Only'
                 sent to this Dynamic Authorization Server.
                 Disconnect-NAK packets received from unknown addresses.
                 This counter may experience a discontinuity when the
                 DAC module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 8 }

   radiusDynAuthClientDisconRetransmissions OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "retransmissions"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-request packets
                 retransmitted to this RADIUS Dynamic Authorization
                 Server. Disconnect-NAK packets received from unknown
                 addresses. This counter may experience a discontinuity
                 when the DAC module (re)starts as indicated by the
                 value of radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 9 }

   radiusDynAuthClientDisconAcks  OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-ACK packets
                 received from this Dynamic Authorization Server. This
                 counter may experience a discontinuity when the DAC
                 module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE



De Cnodder, et al.     Expires September 23, 2006              [Page 11]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 10 }

   radiusDynAuthClientDisconNaks OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 received from this Dynamic Authorization Server.
                 This includes the RADIUS Disconnect-NAK packets
                 received with a Service-Type attribute with value
                 'Authorize Only' and the RADIUS Disconnect-NAK
                 packets received no session context was found. This
                 counter may experience a discontinuity when the DAC
                 module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 11 }

   radiusDynAuthClientDisconNakAuthOnlyRequest OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 that include a Service-Type attribute with value
                 'Authorize Only' received from this Dynamic
                 Authorization Server. This counter may experience a
                 discontinuity when the DAC module (re)starts as
                 indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 12 }

   radiusDynAuthClientDisconNakSessNoContext OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 received from this Dynamic Authorization Server
                 because no session context was found, i.e. it



De Cnodder, et al.     Expires September 23, 2006              [Page 12]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


                 includes an Error-Cause attribute with value 503
                 ('Session Context Not Found'). This counter may
                 experience a discontinuity when the DAC module
                 (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 13 }

   radiusDynAuthClientMalformedDisconResponses OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of malformed RADIUS Disconnect-Ack and
                 Disconnect-NAK packets received from this Dynamic
                 Authorization Server. Bad authenticators and unknown
                 types are not included as malformed Disconnect-Ack and
                 Disconnect-NAK packets. This counter may experience a
                 discontinuity when the DAC module (re)starts as
                 indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 14 }

   radiusDynAuthClientDisconBadAuthenticators OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Ack and Disconnect-NAK
                 packets which contained invalid Authenticator field
                 received from this Dynamic Authorization Server. This
                 counter may experience a discontinuity when the DAC
                 module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 15 }

   radiusDynAuthClientDisconPendingRequests OBJECT-TYPE
          SYNTAX     Gauge32
          UNITS      "requests"



De Cnodder, et al.     Expires September 23, 2006              [Page 13]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-request packets
                 destined for this server that have not yet timed out
                 or received a response. This variable is incremented
                 when an Disconnect-Request is sent and decremented
                 due to receipt of an Disconnect-Ack, Disconnect-NAK
                 or a timeout or a retransmission."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 16 }

   radiusDynAuthClientDisconTimeouts OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "timeouts"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of Disconnect request timeouts to this
                 server. After a timeout the client may retry to the
                 same server or give up. A retry to the same server is
                 counted as a retransmit as well as a timeout. A send
                 to a different server is counted as a
                 Disconnect-Request as well as a timeout. This counter
                 may experience a discontinuity when the DAC module
                 (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 17 }

   radiusDynAuthClientDisconPacketsDropped OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming Disconnect-Ack and
                 Disconnect-NAK packets from this Dynamic Authorization
                 Server silently discarded by the client application for
                 some reason other than malformed, bad authenticators or
                 unknown types. This counter may experience a
                 discontinuity when the DAC module (re)starts as
                 indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and



De Cnodder, et al.     Expires September 23, 2006              [Page 14]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


                 Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 18 }

   radiusDynAuthClientCoARequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-Requests sent to this
                 Dynamic Authorization Server. This also includes
                 the CoA requests that have a Service-Type attribute
                 with value 'Authorize Only'. This counter may
                 experience a discontinuity when the DAC module
                 (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 19 }

   radiusDynAuthClientCoAAuthOnlyRequest OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-requests that include a
                 Service-Type attribute with value 'Authorize Only'
                 sent to this Dynamic Authorization Client. This counter
                 may experience a discontinuity when the DAC module
                 (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 20 }

   radiusDynAuthClientCoARetransmissions OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "retransmissions"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-request packets
                 retransmitted to this RADIUS Dynamic Authorization
                 Server. This counter may experience a discontinuity
                 when the DAC module (re)starts as indicated by the



De Cnodder, et al.     Expires September 23, 2006              [Page 15]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


                 value of radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 21 }

   radiusDynAuthClientCoAAcks  OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-ACK packets received from
                 this Dynamic Authorization Server. This counter may
                 experience a discontinuity when the DAC module
                 (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 22 }

   radiusDynAuthClientCoANaks OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets received from
                 this Dynamic Authorization Server. This includes the
                 RADIUS CoA-NAK packets received with a Service-Type
                 attribute with value 'Authorize Only' and the RADIUS
                 CoA-NAK packets received because no session context
                 was found. This counter may experience a discontinuity
                 when the DAC module (re)starts as indicated by the
                 value of radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 23 }

   radiusDynAuthClientCoANakAuthOnlyRequest OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets that include a



De Cnodder, et al.     Expires September 23, 2006              [Page 16]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


                 Service-Type attribute with value 'Authorize Only'
                 received from this Dynamic Authorization Server. This
                 counter may experience a discontinuity when the DAC
                 module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 24 }

   radiusDynAuthClientCoANakSessNoContext OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets received from
                 this Dynamic Authorization Server because no session
                 context was found, i.e. it includes an Error-Cause
                 attribute with value 503 ('Session Context Not Found').
                 This counter may experience a discontinuity when the
                 DAC module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 25 }

   radiusDynAuthClientMalformedCoAResponses OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of malformed RADIUS CoA-Ack and CoA-NAK
                 packets received from this Dynamic Authorization
                 Server. Bad authenticators and unknown types are
                 not included as malformed CoA-Ack and CoA-NAK packets.
                 This counter may experience a discontinuity when the
                 DAC module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 26 }

   radiusDynAuthClientCoABadAuthenticators OBJECT-TYPE
          SYNTAX     Counter32



De Cnodder, et al.     Expires September 23, 2006              [Page 17]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-Ack and CoA-NAK packets
                 which contained invalid Authenticator field
                 received from this Dynamic Authorization Server.
                 This counter may experience a discontinuity when the
                 DAC module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 27 }

   radiusDynAuthClientCoAPendingRequests OBJECT-TYPE
          SYNTAX     Gauge32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-request packets destined for
                 this server that have not yet timed out or received a
                 response. This variable is incremented when an
                 CoA-Request is sent and decremented due to receipt of
                 a CoA-Ack, CoA-NAK or a timeout or a retransmission."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 28 }

   radiusDynAuthClientCoATimeouts OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "timeouts"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of CoA request timeouts to this server.
                 After a timeout the client may retry to the same
                 server or give up. A retry to the same server is
                 counted as a retransmit as well as a timeout. A send to
                 a different server is counted as a CoA-Request as well
                 as a timeout. This counter may experience a
                 discontinuity when the DAC module (re)starts as
                 indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization



De Cnodder, et al.     Expires September 23, 2006              [Page 18]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 29 }

   radiusDynAuthClientCoAPacketsDropped OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming CoA-Ack and CoA-NAK from this
                 Dynamic Authorization Server silently discarded by the
                 client application for some reason other than
                 malformed, bad authenticators or unknown types. This
                 counter may experience a discontinuity when the DAC
                 module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 30 }

   radiusDynAuthClientUnknownTypes OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming packets of unknown types
                 which were received on the Dynamic Authorization port.
                 This counter may experience a discontinuity when the
                 DAC module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 31 }

   -- conformance information

   radiusDynAuthClientMIBConformance
          OBJECT IDENTIFIER ::= { radiusDynAuthClientMIB 2 }
   radiusDynAuthClientMIBCompliances
          OBJECT IDENTIFIER ::= { radiusDynAuthClientMIBConformance 1 }
   radiusDynAuthClientMIBGroups
          OBJECT IDENTIFIER ::= { radiusDynAuthClientMIBConformance 2 }

   -- compliance statements

   radiusDynAuthClientMIBCompliance MODULE-COMPLIANCE



De Cnodder, et al.     Expires September 23, 2006              [Page 19]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


          STATUS  current
          DESCRIPTION
                "The compliance statement for entities implementing
                 the RADIUS Dynamic Authorization Client. Implementation
                 of this module is for entities that support IPv6, or
                 support IPv4 and IPv6."
          MODULE  -- this module
          MANDATORY-GROUPS { radiusDynAuthClientMIBGroup }

          OBJECT             radiusDynAuthServerAddressType
          SYNTAX             InetAddressType { ipv4(1), ipv6(2) }
          DESCRIPTION
              "An implementation is only required to support IPv4 and
               globally unique IPv6 addresses."

          OBJECT             radiusDynAuthServerAddress
          SYNTAX             InetAddress (SIZE(4|16))
          DESCRIPTION
              "An implementation is only required to support IPv4 and
               globally unique IPv6 addresses."


          GROUP              radiusDynAuthClientAuthOnlyGroup
          DESCRIPTION
                "Only required for Dynamic Authorization Clients that
                 are supporting Service-Type attributes with value
                 'Authorize-Only'."


          GROUP              radiusDynAuthClientNoSessGroup
          DESCRIPTION
                "This group is not required in case the Dynamic
                 Authorization Server can not easily determine whether
                 a session exists or not (e.g., in case of a RADIUS
                 proxy)."

          ::= { radiusDynAuthClientMIBCompliances 1 }

   -- units of conformance

   radiusDynAuthClientMIBGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthClientDisconInvalidServerAddresses,
                    radiusDynAuthClientCoAInvalidServerAddresses,
                    radiusDynAuthClientCounterDiscontinuity,
                    radiusDynAuthServerAddressType,
                    radiusDynAuthServerAddress,
                    radiusDynAuthServerClientPortNumber,
                    radiusDynAuthServerID,



De Cnodder, et al.     Expires September 23, 2006              [Page 20]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


                    radiusDynAuthClientRoundTripTime,
                    radiusDynAuthClientDisconRequests,
                    radiusDynAuthClientDisconRetransmissions,
                    radiusDynAuthClientDisconAcks,
                    radiusDynAuthClientDisconNaks,
                    radiusDynAuthClientMalformedDisconResponses,
                    radiusDynAuthClientDisconBadAuthenticators,
                    radiusDynAuthClientDisconPendingRequests,
                    radiusDynAuthClientDisconTimeouts,
                    radiusDynAuthClientDisconPacketsDropped,
                    radiusDynAuthClientCoARequests,
                    radiusDynAuthClientCoARetransmissions,
                    radiusDynAuthClientCoAAcks,
                    radiusDynAuthClientCoANaks,
                    radiusDynAuthClientMalformedCoAResponses,
                    radiusDynAuthClientCoABadAuthenticators,
                    radiusDynAuthClientCoAPendingRequests,
                    radiusDynAuthClientCoATimeouts,
                    radiusDynAuthClientCoAPacketsDropped,
                    radiusDynAuthClientUnknownTypes
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects providing management of
                 a RADIUS Dynamic Authorization Client."
          ::= { radiusDynAuthClientMIBGroups 1 }

   radiusDynAuthClientAuthOnlyGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthClientDisconAuthOnlyRequests,
                    radiusDynAuthClientDisconNakAuthOnlyRequest,
                    radiusDynAuthClientCoAAuthOnlyRequest,
                    radiusDynAuthClientCoANakAuthOnlyRequest
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects supporting the RADIUS
                 messages including Service-Type attribute with
                 value 'Authorize Only'."
          ::= { radiusDynAuthClientMIBGroups 2 }

   radiusDynAuthClientNoSessGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthClientDisconNakSessNoContext,
                    radiusDynAuthClientCoANakSessNoContext
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects supporting the RADIUS
                 messages that are referring to non existing sessions."



De Cnodder, et al.     Expires September 23, 2006              [Page 21]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


          ::= { radiusDynAuthClientMIBGroups 3 }



   END














































De Cnodder, et al.     Expires September 23, 2006              [Page 22]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


5.  Security Considerations

   There are no management objects defined in this MIB module that have
   a MAX-ACCESS clause of read-write and/or read-create.  So, if this
   MIB module is implemented correctly, then there is no risk that an
   intruder can alter or create any management objects of this MIB
   module via direct SNMP SET operations

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:

   radiusDynAuthServerAddress and radiusDynAuthServerAddressType

   These can be used to determine the address of the DAS with which the
   DAC is communicating.  This information could be useful in mounting
   an attack on the DAS.

   radiusDynAuthServerID

   This can be used to determine the Identifier of the DAS.  This
   information could be useful in impersonating the DAS.

   radiusDynAuthServerClientPortNumber

   This can be used to determine the destination port number to which
   the DAC is sending.  This information could be useful in mounting an
   attack on the DAS.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPsec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an



De Cnodder, et al.     Expires September 23, 2006              [Page 23]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.
















































De Cnodder, et al.     Expires September 23, 2006              [Page 24]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


6.  IANA considerations

   IANA is requested to assign an OID under mib-2.
















































De Cnodder, et al.     Expires September 23, 2006              [Page 25]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


7.  Acknowledgements

   The authors would also like to acknowledge the following people for
   their comments on this document: Bernard Aboba, Alan DeKok, David
   Nelson, Anjaneyulu Pata, Dan Romascanu, Juergen Schoenwaelder, Greg
   Weber, Bert Wijnen and Glen Zorn.













































De Cnodder, et al.     Expires September 23, 2006              [Page 26]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", RFC 2119, March 1997.

   [RFC2578]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Structure of Management
              Information Version 2 (SMIv2)", STD 58, RFC 2578,
              April 1999.

   [RFC2579]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Textual Conventions for
              SMIv2", STD 58, RFC 2579, April 1999.

   [RFC2580]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Conformance Statements for
              SMIv2", STD 58, RFC 2580, April 1999.

   [RFC3411]  Harrington, D., Presuhn, R., and B. Wijnen, "An
              Architecture for Describing Simple Network Management
              Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
              December 2002.

   [RFC3576]  Chiba, M., Dommety, G., Eklund, M., Mitton, D., and B.
              Aboba, "Dynamic Authorization Extensions to Remote
              Authentication Dial In User Service (RADIUS)", RFC 3576,
              July 2003.

   [RFC4001]  Daniele, M. and et al., "Textual Conventions for Internet
              Network Addresses", RFC 4001, February 2005.

8.2.  Informative References

   [DYNSERV]  De Cnodder, S., Jonnala, N., and M. Chiba, "RADIUS Dynamic
              Authorization Server MIB",
              draft-ietf-radext-dynauth-server-mib-05.txt, work in
              progress, December 2005.

   [RFC2619bis]
              Nelson, D., "RADIUS Auth Server MIB (IPv6)",
              draft-ietf-radext-rfc2619bis-01.txt work in progress,
              October 2005.

   [RFC2621bis]
              Nelson, D., "RADIUS Acct Server MIB (IPv6)",
              draft-ietf-radext-rfc2621bis-01.txt work in progress,



De Cnodder, et al.     Expires September 23, 2006              [Page 27]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


              October 2005.

   [RFC2865]  Rigney, C., Willens, S., Rubens, A., and W. Simpson,
              "Remote Authentication Dial In User Service (RADIUS)",
              RFC 2865, June 2000.

   [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
              "Introduction and Applicability Statements for Internet-
              Standard Management Framework", RFC 3410, December 2002.










































De Cnodder, et al.     Expires September 23, 2006              [Page 28]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


Authors' Addresses

   Stefaan De Cnodder
   Alcatel
   Francis Wellesplein 1
   B-2018 Antwerp
   Belgium

   Phone: +32 3 240 85 15
   Email: stefaan.de_cnodder@alcatel.be


   Nagi Reddy Jonnala
   Cisco Systems, Inc.
   Divyasree Chambers,  B Wing, O'Shaugnessy Road
   Bangalore-560027, India

   Phone: +91 94487 60828
   Email: njonnala@cisco.com


   Murtaza Chiba
   Cisco Systems, Inc.
   170 West Tasman Dr.
   San Jose CA, 95134

   Phone: +1 408 525 7198
   Email: mchiba@cisco.com























De Cnodder, et al.     Expires September 23, 2006              [Page 29]

Internet-Draft      Dynamic Authorization Client MIB          March 2006


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2006).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




De Cnodder, et al.     Expires September 23, 2006              [Page 30]





Network Working Group                                      S. De Cnodder
Internet-Draft                                                   Alcatel
Expires: September 23, 2006                                   N. Jonnala
                                                                M. Chiba
                                                     Cisco Systems, Inc.
                                                          March 22, 2006


                    Dynamic Authorization Server MIB
              draft-ietf-radext-dynauth-server-mib-05.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on September 23, 2006.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes the Remote Authentication Dial In User
   Service (RADIUS) [RFC2865] Dynamic Authorization Server (DAS)
   functions that support the dynamic authorization extensions as
   defined in RFC 3576.



De Cnodder, et al.     Expires September 23, 2006               [Page 1]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
     1.1.  Requirements notation  . . . . . . . . . . . . . . . . . .  3
     1.2.  Terminology  . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  The Internet-Standard Management Framework . . . . . . . . . .  4
   3.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
   4.  RADIUS Dynamic Authorization Server MIB Definitions  . . . . .  7
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . . 22
   6.  IANA considerations  . . . . . . . . . . . . . . . . . . . . . 23
   7.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 24
   8.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 25
     8.1.  Normative References . . . . . . . . . . . . . . . . . . . 25
     8.2.  Informative References . . . . . . . . . . . . . . . . . . 25
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 27
   Intellectual Property and Copyright Statements . . . . . . . . . . 28



































De Cnodder, et al.     Expires September 23, 2006               [Page 2]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


1.  Introduction

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   It is becoming increasingly important to support Dynamic
   Authorization extensions on the network access server (NAS) devices
   to handle the Disconnect and Change-of-Authorization (CoA) messages
   as described in [RFC3576].  As a result, the effective management of
   RADIUS Dynamic Authorization entities is of considerable importance.
   This RADIUS Dynamic Authorization Server (DAS) MIB complements the
   managed objects used for managing RADIUS authentication and
   accounting clients as described in [RFC2618bis] and [RFC2620bis],
   respectively.


   -- RFC Ed.: references [DYNSERV], [RFC2618bis], [RFC2619bis],
   --          [RFC2620bis], and [RFC2621bis] should be replaced by
   --          references to the corresponding RFC.

1.1.  Requirements notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

1.2.  Terminology

   Dynamic Authorization Server (DAS)

   The component that resides on the NAS which processes the Disconnect
   and Change-of-Authorization (CoA) Request packets [RFC3576] sent by
   the Dynamic Authorization Client.

   Dynamic Authorization Client (DAC)

   The component which sends Disconnect and CoA-Request packets to the
   Dynamic Authorization Server.  While often residing on the RADIUS
   server, it is also possible for this component to be located on a
   separate host, such as a Rating Engine.

   Dynamic Authorization Server Port

   The UDP port on which the Dynamic Authorization Server listens for
   the Disconnect and CoA requests sent by the Dynamic Authorization
   Client.






De Cnodder, et al.     Expires September 23, 2006               [Page 3]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


2.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC2578 [RFC2578], STD 58, RFC2579 [RFC2579] and STD 58, RFC2580
   [RFC2580].





































De Cnodder, et al.     Expires September 23, 2006               [Page 4]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


3.  Overview

   "Dynamic Authorization Extensions to RADIUS" [RFC3576] defines the
   operation of Disconnect-Request, Disconnect-ACK, Disconnect-NAK, CoA-
   Request, CoA-ACK and CoA-NAK packets.  Typically NAS devices
   implement the DAS function, and thus would be expected to implement
   the RADIUS Dynamic Authorization Server MIB, while DACs implement the
   client function, and thus would be expected to implement the RADIUS
   Dynamic Authorization Client MIB.

   However, it is possible for a RADIUS Dynamic Authorization entity to
   perform both client and server functions.  For example, a RADIUS
   proxy may act as a DAS to one or more DACs, while simultaneously
   acting as a DAC to one or more DASs.  In such situations, it is
   expected that RADIUS entities combining client and server
   functionality will support both the client and server MIBs.

   This memo describes the MIB for Dynamic Authorization Servers and
   relates to the following documents as follows:

   [RFC2618bis] describes the MIB for a RADIUS Auth Client MIB.

   [RFC2619bis] describes the MIB for a RADIUS Auth Server MIB.

   [RFC2620bis] describes the MIB for a RADIUS Acct Client MIB.

   [RFC2621bis] describes the MIB for a RADIUS Acct Server MIB.

   [DYNCLNT] describes the MIB for a RADIUS Dynamic Authorization
   Client.

   A NAS typically implements the MIBs for a RADIUS Authentication
   Client, a RADIUS accounting client, and a RADIUS Dynamic
   Authorization Server.  However, any one MIB can be implemented
   without implementing any of the other MIBs, i.e. the MIBs have no
   dependencies on each other.  A typical case would be for a device to
   implement the MIBs RADIUS authentication server, RADIUS accounting
   server and RADIUS Dynamic Authorization Client.  A RADIUS proxy might
   implement any, all or a subset of the MIBs listed above and the MIB
   as defined in this document.











De Cnodder, et al.     Expires September 23, 2006               [Page 5]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


              +---------------+                      +---------------+
    User 1----|               |  Disconnect-Request  |               |
              |    Dynamic    |     CoA-Request      |    Dynamic    |
    User 2----| Authorization |<---------------------| Authorization |
              |    Server     |--------------------->|    Client     |
    User 3----|     (DAS)     |    Disconnect-Ack    |     (DAC)     |
              |               |    Disconnect-NAK    |               |
              +---------------+    CoA-Ack/CoA-NAK   +---------------+

   Figure 1: Mapping of clients and servers.

   This MIB module for the Dynamic Authorization Server contains the
   following:

   1.  Four scalar objects, and

   2.  One Dynamic Authorization Client Table.  This table contains one
   row for each DAC with which the DAS shares a secret.

































De Cnodder, et al.     Expires September 23, 2006               [Page 6]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


4.  RADIUS Dynamic Authorization Server MIB Definitions

   RADIUS-DYNAUTH-SERVER-MIB DEFINITIONS ::= BEGIN

   IMPORTS
          MODULE-IDENTITY, OBJECT-TYPE,
          Counter32, Integer32, mib-2,
          TimeTicks         FROM SNMPv2-SMI             -- [RFC2578]
          SnmpAdminString   FROM SNMP-FRAMEWORK-MIB     -- [RFC3411]
          InetAddressType,
          InetAddress       FROM INET-ADDRESS-MIB       -- [RFC4001]
          MODULE-COMPLIANCE,
          OBJECT-GROUP  FROM SNMPv2-CONF;               -- [RFC2580]

   radiusDynAuthServerMIB MODULE-IDENTITY
          LAST-UPDATED "200603220000Z" -- 22 March 2006
          ORGANIZATION "IETF RADEXT Working Group"
          CONTACT-INFO
                 " Stefaan De Cnodder
                   Alcatel
                   Francis Wellesplein 1
                   B-2018 Antwerp
                   Belgium

                   Phone: +32 3 240 85 15
                   EMail: stefaan.de_cnodder@alcatel.be

                   Nagi Reddy Jonnala
                   Cisco Systems, Inc.
                   Divyasree Chambers, B Wing,
                   O'Shaugnessy Road,
                   Bangalore-560027, India.

                   Phone: +91 94487 60828
                   EMail: njonnala@cisco.com

                   Murtaza Chiba
                   Cisco Systems, Inc.
                   170 West Tasman Dr.
                   San Jose CA, 95134

                   Phone: +1 408 525 7198
                   EMail: mchiba@cisco.com "
          DESCRIPTION
              "The MIB module for entities implementing the server
               side of the Dynamic Authorization Extensions to Remote
               Authentication Dial In User Service (RADIUS) protocol.




De Cnodder, et al.     Expires September 23, 2006               [Page 7]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


               Copyright (C) The Internet Society (2006).  Initial
               version as published in RFC yyyy;
               for full legal notices see the RFC itself."
   -- RFC Ed.: replace yyyy with actual RFC number & remove this note

          REVISION "200603220000Z" -- 22 March 2006
          DESCRIPTION "Initial version as published in RFC yyyy."
   -- RFC Ed.: replace yyyy with actual RFC number & remove this note
          ::= { mib-2 xxx }
   -- The value xxx to be assigned by IANA.

   radiusDynAuthServerMIBObjects OBJECT IDENTIFIER ::=
                                         { radiusDynAuthServerMIB 1 }

   radiusDynAuthServerScalars    OBJECT IDENTIFIER ::=
                                  { radiusDynAuthServerMIBObjects 1 }

   radiusDynAuthServerDisconInvalidClientAddresses OBJECT-TYPE
         SYNTAX Counter32
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of Disconnect-Request packets received from
                unknown addresses. This counter may experience a
                discontinuity when the DAS module (re)starts as
                indicated by the value of
                radiusDynAuthServerCounterDiscontinuity."
         ::= { radiusDynAuthServerScalars 1 }

   radiusDynAuthServerCoAInvalidClientAddresses OBJECT-TYPE
         SYNTAX Counter32
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of CoA-Request packets received from unknown
                addresses. This counter may experience a discontinuity
                when the DAS module (re)starts as indicated by the value
                of radiusDynAuthServerCounterDiscontinuity."
         ::= { radiusDynAuthServerScalars 2 }

   radiusDynAuthServerIdentifier OBJECT-TYPE
         SYNTAX SnmpAdminString
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
                "The NAS-Identifier of the RADIUS Dynamic Authorization
                 Server. This is not necessarily the same as sysName in
                 MIB II."



De Cnodder, et al.     Expires September 23, 2006               [Page 8]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


         REFERENCE
                "RFC 2865, Section 5.32, NAS-Identifier."
         ::= { radiusDynAuthServerScalars 3 }

   radiusDynAuthServerCounterDiscontinuity OBJECT-TYPE
          SYNTAX TimeTicks
          UNITS  "hundredths of a second"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The time (in hundredths of a second) since the
                 DAS module was last re-initialized."
          ::= { radiusDynAuthServerScalars 4 }

   radiusDynAuthClientTable OBJECT-TYPE
         SYNTAX SEQUENCE OF RadiusDynAuthClientEntry
         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
               "The (conceptual) table listing the RADIUS Dynamic
                Authorization Clients with which the server shares a
                secret."
         ::= { radiusDynAuthServerMIBObjects 2 }

   radiusDynAuthClientEntry OBJECT-TYPE
          SYNTAX     RadiusDynAuthClientEntry
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "An entry (conceptual row) representing one Dynamic
                 Authorization Client with which the server shares a
                 secret."
          INDEX      { radiusDynAuthClientIndex }
          ::= { radiusDynAuthClientTable 1 }

   RadiusDynAuthClientEntry ::= SEQUENCE {
          radiusDynAuthClientIndex                     Integer32,
          radiusDynAuthClientAddressType               InetAddressType,
          radiusDynAuthClientAddress                   InetAddress,
          radiusDynAuthServDisconRequests              Counter32,
          radiusDynAuthServDisconAuthOnlyRequests      Counter32,
          radiusDynAuthServDupDisconRequests           Counter32,
          radiusDynAuthServDisconAcks                  Counter32,
          radiusDynAuthServDisconNaks                  Counter32,
          radiusDynAuthServDisconNakAuthOnlyRequests   Counter32,
          radiusDynAuthServDisconNakSessNoContext      Counter32,
          radiusDynAuthServDisconUserSessRemoved       Counter32,
          radiusDynAuthServMalformedDisconRequests     Counter32,



De Cnodder, et al.     Expires September 23, 2006               [Page 9]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          radiusDynAuthServDisconBadAuthenticators     Counter32,
          radiusDynAuthServDisconPacketsDropped        Counter32,
          radiusDynAuthServCoARequests                 Counter32,
          radiusDynAuthServCoAAuthOnlyRequests         Counter32,
          radiusDynAuthServDupCoARequests              Counter32,
          radiusDynAuthServCoAAcks                     Counter32,
          radiusDynAuthServCoANaks                     Counter32,
          radiusDynAuthServCoANakAuthOnlyRequests      Counter32,
          radiusDynAuthServCoANakSessNoContext         Counter32,
          radiusDynAuthServCoAUserSessChanged          Counter32,
          radiusDynAuthServMalformedCoARequests        Counter32,
          radiusDynAuthServCoABadAuthenticators        Counter32,
          radiusDynAuthServCoAPacketsDropped           Counter32,
          radiusDynAuthServUnknownTypes                Counter32
   }


   radiusDynAuthClientIndex OBJECT-TYPE
          SYNTAX     Integer32 (1..2147483647)
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "A number uniquely identifying each RADIUS Dynamic
                 Authorization Client with which this Dynamic
                 Authorization Server communicates. This number is
                 allocated by the agent implementing this MIB module,
                 and is unique in this context."
          ::= { radiusDynAuthClientEntry 1 }

   radiusDynAuthClientAddressType OBJECT-TYPE
          SYNTAX     InetAddressType
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The type of IP address of the RADIUS Dynamic
                 Authorization Client referred to in this table entry."
          ::= { radiusDynAuthClientEntry 2 }

   radiusDynAuthClientAddress OBJECT-TYPE
          SYNTAX     InetAddress
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The IP address value of the RADIUS Dynamic
                 Authorization Client referred to in this table entry,
                 using the version neutral IP address format. The type
                 of this address is determined by the value of
                 the radiusDynAuthClientAddressType object."



De Cnodder, et al.     Expires September 23, 2006              [Page 10]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          ::= { radiusDynAuthClientEntry 3 }

   radiusDynAuthServDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Requests received
                 from this Dynamic Authorization Client. This also
                 includes the RADIUS Disconnect-Requests that have a
                 Service-Type attribute with value 'Authorize Only'.
                 This counter may experience a discontinuity when the
                 DAS module (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 4 }

   radiusDynAuthServDisconAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Requests that include
                 a Service-Type attribute with value 'Authorize Only'
                 received from this Dynamic Authorization Client. This
                 counter may experience a discontinuity when the DAS
                 module (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 5 }

   radiusDynAuthServDupDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of duplicate RADIUS Disconnect-Request
                 packets received from this Dynamic Authorization
                 Client. This counter may experience a discontinuity
                 when the DAS module (re)starts as indicated by the
                 value of radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."



De Cnodder, et al.     Expires September 23, 2006              [Page 11]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          ::= { radiusDynAuthClientEntry 6 }

   radiusDynAuthServDisconAcks  OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-ACK packets sent to
                 this Dynamic Authorization Client. This counter may
                 experience a discontinuity when the DAS module
                 (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 7 }

   radiusDynAuthServDisconNaks OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 sent to this Dynamic Authorization Client. This
                 includes the RADIUS Disconnect-NAK packets sent
                 with a Service-Type attribute with value 'Authorize
                 Only' and the RADIUS Disconnect-NAK packets sent
                 because no session context was found. This counter
                 may experience a discontinuity when the DAS module
                 (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 8 }

   radiusDynAuthServDisconNakAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets that
                 include a Service-Type attribute with value
                 'Authorize Only' sent to this Dynamic Authorization
                 Client. This counter may experience a discontinuity
                 when the DAS module (re)starts as indicated by the
                 value of radiusDynAuthServerCounterDiscontinuity."



De Cnodder, et al.     Expires September 23, 2006              [Page 12]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 9 }

   radiusDynAuthServDisconNakSessNoContext OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 sent to this Dynamic Authorization Client
                 because no session context was found. This counter may
                 experience a discontinuity when the DAS module
                 (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 10 }

   radiusDynAuthServDisconUserSessRemoved OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "sessions"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of user sessions removed for the
                 Disconnect-Requests received from this
                 Dynamic Authorization Client. Depending on site
                 specific policies, a single Disconnect request
                 can remove multiple user sessions. In the case
                 that this Dynamic Authorization Server has no
                 knowledge of the number of user sessions that
                 are affected by a single request, for each such
                 Disconnect-Request, it will count as a single
                 affected user session only. This counter may experience
                 a discontinuity when the DAS module (re)starts as
                 indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 11 }

   radiusDynAuthServMalformedDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current



De Cnodder, et al.     Expires September 23, 2006              [Page 13]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          DESCRIPTION
                "The number of malformed RADIUS Disconnect-Request
                 packets received from this Dynamic Authorization
                 Client. Bad authenticators and unknown types are not
                 included as malformed Disconnect-Requests. This counter
                 may experience a discontinuity when the DAS module
                 (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 12 }

   radiusDynAuthServDisconBadAuthenticators OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Request packets
                 which contained invalid Authenticator field
                 received from this Dynamic Authorization Client. This
                 counter may experience a discontinuity when the DAS
                 module (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 13 }

   radiusDynAuthServDisconPacketsDropped OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming Disconnect-Requests
                 from this Dynamic Authorization Client silently
                 discarded by the server application for some reason
                 other than malformed, bad authenticators or unknown
                 types. This counter may experience a discontinuity
                 when the DAS module (re)starts as indicated by the
                 value of radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 14 }




De Cnodder, et al.     Expires September 23, 2006              [Page 14]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


   radiusDynAuthServCoARequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-requests received from this
                 Dynamic Authorization Client. This also includes
                 the CoA requests that have a Service-Type attribute
                 with value 'Authorize Only'. This counter may
                 experience a discontinuity when the DAS module
                 (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 15 }

   radiusDynAuthServCoAAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-requests that include a
                 Service-Type attribute with value 'Authorize Only'
                 received from this Dynamic Authorization Client. This
                 counter may experience a discontinuity when the DAS
                 module (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 16 }


   radiusDynAuthServDupCoARequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of duplicate RADIUS CoA-Request packets
                 received from this Dynamic Authorization Client. This
                 counter may experience a discontinuity when the DAS
                 module (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE



De Cnodder, et al.     Expires September 23, 2006              [Page 15]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 17 }

   radiusDynAuthServCoAAcks  OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-ACK packets sent to this
                 Dynamic Authorization Client. This counter may
                 experience a discontinuity when the DAS module
                 (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 18 }

   radiusDynAuthServCoANaks OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets sent to
                 this Dynamic Authorization Client. This includes
                 the RADIUS CoA-NAK packets sent with a Service-Type
                 attribute with value 'Authorize Only' and the RADIUS
                 CoA-NAK packets sent because no session context was
                 found. This counter may experience a discontinuity
                 when the DAS module (re)starts as indicated by the
                 value of radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 19 }

   radiusDynAuthServCoANakAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets that include a
                 Service-Type attribute with value 'Authorize Only'
                 sent to this Dynamic Authorization Client. This counter



De Cnodder, et al.     Expires September 23, 2006              [Page 16]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                 may experience a discontinuity when the DAS module
                 (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 20 }

   radiusDynAuthServCoANakSessNoContext OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets sent to this
                 Dynamic Authorization Client because no session context
                 was found. This counter may experience a discontinuity
                 when the DAS module (re)starts as indicated by the
                 value of radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 21 }

   radiusDynAuthServCoAUserSessChanged OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "sessions"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of user sessions authorization
                 changed for the CoA-Requests received from this
                 Dynamic Authorization Client. Depending on site
                 specific policies, a single CoA request can change
                 multiple user sessions' authorization.  In the case
                 this Dynamic Authorization Server has no knowledge of
                 the number of user sessions that are affected by a
                 single request, for each such CoA-Request, it will
                 count as a single affected user session only. This
                 counter may experience a discontinuity when the DAS
                 module (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 22 }

   radiusDynAuthServMalformedCoARequests OBJECT-TYPE



De Cnodder, et al.     Expires September 23, 2006              [Page 17]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of malformed RADIUS CoA-Request packets
                 received from this Dynamic Authorization Client. Bad
                 authenticators and unknown types are not included as
                 malformed CoA-Requests. This counter may experience a
                 discontinuity when the DAS module (re)starts as
                 indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry  23 }

   radiusDynAuthServCoABadAuthenticators OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-Request packets which
                 contained invalid Authenticator field received
                 from this Dynamic Authorization Client. This counter
                 may experience a discontinuity when the DAS module
                 (re)starts as indicated by the value of
                   radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 24 }

   radiusDynAuthServCoAPacketsDropped OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming CoA packets from this
                 Dynamic Authorization Client silently discarded
                 by the server application for some reason other than
                 malformed, bad authenticators or unknown types. This
                 counter may experience a discontinuity when the DAS
                 module (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE



De Cnodder, et al.     Expires September 23, 2006              [Page 18]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 25 }

   radiusDynAuthServUnknownTypes OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming packets of unknown types which
                 were received on the Dynamic Authorization port. This
                 counter may experience a discontinuity when the DAS
                 module (re)starts as indicated by the value of
                 radiusDynAuthServerCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 26 }

   -- conformance information

   radiusDynAuthServerMIBConformance
          OBJECT IDENTIFIER ::= { radiusDynAuthServerMIB 2 }
   radiusDynAuthServerMIBCompliances
          OBJECT IDENTIFIER ::= { radiusDynAuthServerMIBConformance 1 }
   radiusDynAuthServerMIBGroups
          OBJECT IDENTIFIER ::= { radiusDynAuthServerMIBConformance 2 }

   -- compliance statements

   radiusAuthServerMIBCompliance MODULE-COMPLIANCE
          STATUS  current
          DESCRIPTION
                "The compliance statement for entities implementing
                 the RADIUS Dynamic Authorization Server. Implementation
                 of this module is for entities that support IPv6, or
                 support IPv4 and IPv6."
          MODULE  -- this module
          MANDATORY-GROUPS { radiusDynAuthServerMIBGroup }

          OBJECT             radiusDynAuthClientAddressType
          SYNTAX             InetAddressType { ipv4(1), ipv6(2) }
          DESCRIPTION
              "An implementation is only required to support IPv4 and
               globally unique IPv6 addresses."

          OBJECT             radiusDynAuthClientAddress
          SYNTAX             InetAddress (SIZE(4|16))



De Cnodder, et al.     Expires September 23, 2006              [Page 19]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          DESCRIPTION
              "An implementation is only required to support IPv4 and
               globally unique IPv6 addresses."

          GROUP              radiusDynAuthServerAuthOnlyGroup
          DESCRIPTION
                "Only required for Dynamic Authorization Clients that
                 are supporting Service-Type attributes with value
                 'Authorize-Only'."


          GROUP              radiusDynAuthServerNoSessGroup
          DESCRIPTION
                "This group is not required in case the Dynamic
                 Authorization Server can not easily determine whether
                 a session exists or not (e.g., in case of a RADIUS
                 proxy)."

          ::= { radiusDynAuthServerMIBCompliances 1 }

   -- units of conformance

   radiusDynAuthServerMIBGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthServerDisconInvalidClientAddresses,
                    radiusDynAuthServerCoAInvalidClientAddresses,
                    radiusDynAuthServerIdentifier,
                    radiusDynAuthServerCounterDiscontinuity,
                    radiusDynAuthClientAddressType,
                    radiusDynAuthClientAddress,
                    radiusDynAuthServDisconRequests,
                    radiusDynAuthServDupDisconRequests,
                    radiusDynAuthServDisconAcks,
                    radiusDynAuthServDisconNaks,
                    radiusDynAuthServDisconUserSessRemoved,
                    radiusDynAuthServMalformedDisconRequests,
                    radiusDynAuthServDisconBadAuthenticators,
                    radiusDynAuthServDisconPacketsDropped,
                    radiusDynAuthServCoARequests,
                    radiusDynAuthServDupCoARequests,
                    radiusDynAuthServCoAAcks,
                    radiusDynAuthServCoANaks,
                    radiusDynAuthServCoAUserSessChanged,
                    radiusDynAuthServMalformedCoARequests,
                    radiusDynAuthServCoABadAuthenticators,
                    radiusDynAuthServCoAPacketsDropped,
                    radiusDynAuthServUnknownTypes
                  }
          STATUS  current



De Cnodder, et al.     Expires September 23, 2006              [Page 20]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          DESCRIPTION
                "The collection of objects providing management of
                 a RADIUS Dynamic Authorization Server."
          ::= { radiusDynAuthServerMIBGroups 1 }

   radiusDynAuthServerAuthOnlyGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthServDisconAuthOnlyRequests,
                    radiusDynAuthServDisconNakAuthOnlyRequests,
                    radiusDynAuthServCoAAuthOnlyRequests,
                    radiusDynAuthServCoANakAuthOnlyRequests
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects supporting the RADIUS
                 messages including Service-Type attribute with
                 value 'Authorize Only'."
          ::= { radiusDynAuthServerMIBGroups 2 }

   radiusDynAuthServerNoSessGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthServDisconNakSessNoContext,
                    radiusDynAuthServCoANakSessNoContext
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects supporting the RADIUS
                 messages that are referring to non existing sessions."
          ::= { radiusDynAuthServerMIBGroups 3 }



   END




















De Cnodder, et al.     Expires September 23, 2006              [Page 21]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


5.  Security Considerations

   There are no management objects defined in this MIB module that have
   a MAX-ACCESS clause of read-write and/or read-create.  So, if this
   MIB module is implemented correctly, then there is no risk that an
   intruder can alter or create any management objects of this MIB
   module via direct SNMP SET operations

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:

   radiusDynAuthClientAddress and radiusDynAuthClientAddressType

   These can be used to determine the address of the DAC with which the
   DAS is communicating.  This information could be useful in mounting
   an attack on the DAC.

   radiusDynAuthServerIdentifier

   This can be used to determine the Identifier of the DAS.  This
   information could be useful in impersonating the DAS.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPsec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.






De Cnodder, et al.     Expires September 23, 2006              [Page 22]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


6.  IANA considerations

   IANA is requested to assign an OID xxx under mib-2.
















































De Cnodder, et al.     Expires September 23, 2006              [Page 23]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


7.  Acknowledgements

   The authors would also like to acknowledge the following people for
   their comments on this document: Bernard Aboba, Alan DeKok, David
   Nelson, Anjaneyulu Pata, Dan Romascanu, Juergen Schoenwaelder, Greg
   Weber, Bert Wijnen and Glen Zorn.













































De Cnodder, et al.     Expires September 23, 2006              [Page 24]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", RFC 2119, March 1997.

   [RFC2578]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Structure of Management
              Information Version 2 (SMIv2)", STD 58, RFC 2578,
              April 1999.

   [RFC2579]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Textual Conventions for
              SMIv2", STD 58, RFC 2579, April 1999.

   [RFC2580]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Conformance Statements for
              SMIv2", STD 58, RFC 2580, April 1999.

   [RFC3411]  Harrington, D., Presuhn, R., and B. Wijnen, "An
              Architecture for Describing Simple Network Management
              Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
              December 2002.

   [RFC3576]  Chiba, M., Dommety, G., Eklund, M., Mitton, D., and B.
              Aboba, "Dynamic Authorization Extensions to Remote
              Authentication Dial In User Service (RADIUS)", RFC 3576,
              July 2003.

   [RFC4001]  Daniele, M. and et al., "Textual Conventions for Internet
              Network Addresses", RFC 4001, February 2005.

8.2.  Informative References

   [DYNCLNT]  De Cnodder, S., Jonnala, N., and M. Chiba, "RADIUS Dynamic
              Authorization Client MIB",
              draft-ietf-radext-dynauth-client-mib-05.txt, work in
              progress, December 2005.

   [RFC2618bis]
              Nelson, D., "RADIUS Auth Client MIB (IPv6)",
              draft-ietf-radext-rfc2618bis-01.txt work in progress,
              October 2005.

   [RFC2619bis]
              Nelson, D., "RADIUS Auth Server MIB (IPv6)",
              draft-ietf-radext-rfc2619bis-01.txt work in progress,



De Cnodder, et al.     Expires September 23, 2006              [Page 25]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


              October 2005.

   [RFC2620bis]
              Nelson, D., "RADIUS Acct Client MIB (IPv6)",
              draft-ietf-radext-rfc2620bis-01.txt work in progress,
              October 2005.

   [RFC2621bis]
              Nelson, D., "RADIUS Acct Server MIB (IPv6)",
              draft-ietf-radext-rfc2621bis-01.txt work in progress,
              October 2005.

   [RFC2865]  Rigney, C., Willens, S., Rubens, A., and W. Simpson,
              "Remote Authentication Dial In User Service (RADIUS)",
              RFC 2865, June 2000.

   [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
              "Introduction and Applicability Statements for Internet-
              Standard Management Framework", RFC 3410, December 2002.
































De Cnodder, et al.     Expires September 23, 2006              [Page 26]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


Authors' Addresses

   Stefaan De Cnodder
   Alcatel
   Francis Wellesplein 1
   B-2018 Antwerp
   Belgium

   Phone: +32 3 240 85 15
   Email: stefaan.de_cnodder@alcatel.be


   Nagi Reddy Jonnala
   Cisco Systems, Inc.
   Divyasree Chambers,  B Wing, O'Shaugnessy Road
   Bangalore-560027, India

   Phone: +91 94487 60828
   Email: njonnala@cisco.com


   Murtaza Chiba
   Cisco Systems, Inc.
   170 West Tasman Dr.
   San Jose CA, 95134

   Phone: +1 408 525 7198
   Email: mchiba@cisco.com























De Cnodder, et al.     Expires September 23, 2006              [Page 27]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2006).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




De Cnodder, et al.     Expires September 23, 2006              [Page 28]