RE: Reviewing is needed, FW: New Version Notification for draft-ietf-softwire-6rd-radius-attrib-00

[Sheng Jiang <shengjiang@huawei.com>]

Thanks, Bernard. We were aware the Design Guidelines document. We have followed the guidelines,
also refer to exist radius RFCs. We still like to get reviews by RADIUS experts in case, we have
missed any thing.

Regards,

Sheng

> -----Original Message-----
> From: owner-radiusext@ops.ietf.org 
> [mailto:owner-radiusext@ops.ietf.org] On Behalf Of Bernard Aboba
> Sent: Tuesday, November 16, 2010 12:15 PM
> To: shengjiang@huawei.com; radiusext@ops.ietf.org; softwires@ietf.org
> Subject: RE: Reviewing is needed, FW: New Version 
> Notification for draft-ietf-softwire-6rd-radius-attrib-00
> 
> The RADIUS Design Guidelines document specifies guidelines 
> for the design of RADIUS attributes as well as compatibility 
> with the RADIUS protocol:
> http://tools.ietf.org/html/draft-ietf-radext-design
> 
> Please have a look at the document.  In particular, it is 
> expected that prior to requesting review, that documents will 
> have examined their compatibility with the checklist 
> contained in Appendix A. 
> 
> > Date: Tue, 16 Nov 2010 08:56:30 +0800
> > From: shengjiang@huawei.com
> > Subject: Reviewing is needed, FW: New Version Notification for 
> > draft-ietf-softwire-6rd-radius-attrib-00
> > To: radiusext@ops.ietf.org; softwires@ietf.org
> > 
> > Hi, Radext WG,
> > 
> > The softwire WG has juest approved a WG document, 
> > draft-ietf-softwire-6rd-radius-attrib, which defines a 
> RADIUS attribute that carries 6rd configuration information 
> from AAA server to BNG.
> > 
> > We would like to get reviewing from Radext WG to make sure the 
> > compatibility between this draft and RADIUS protocol. Any 
> comments are welcome.
> > 
> > Many thanks and best regards,
> > 
> > Sheng
> > 
> > > -----Original Message-----
> > > From: IETF I-D Submission Tool [mailto:idsubmission@ietf.org]
> > > Sent: Tuesday, November 16, 2010 2:26 AM
> > > To: shengjiang@huawei.com
> > > Cc: guoseu@huawei.com
> > > Subject: New Version Notification for 
> > > draft-ietf-softwire-6rd-radius-attrib-00
> > > 
> > > 
> > > A new version of I-D,
> > > draft-ietf-softwire-6rd-radius-attrib-00.txt has been 
> successfully 
> > > submitted by Sheng Jiang and posted to the IETF repository.
> > > 
> > > Filename: draft-ietf-softwire-6rd-radius-attrib
> > > Revision: 00
> > > Title: RADIUS Attribute for 6rd
> > > Creation_date: 2010-11-15
> > > WG ID: softwire
> > > Number_of_pages: 8
> > > 
> > > Abstract:
> > > 6rd is One of the most popular methods to provide both 
> IPv4 and IPv6 
> > > connectivity services simultaneously during the
> > > IPv4/IPv6 co-existing period. The DHCP 6rd option has 
> been defined 
> > > to configure 6rd CPE.
> > > But in many networks, the configuration information may 
> be stored in 
> > > AAA servers while user configuration is mainly from Broadband 
> > > Network Gateway (BNG) through DHC protocol. This document 
> defines a 
> > > RADIUS attribute that carries 6rd configuration 
> information from AAA 
> > > server to BNG.
> > > 
> > > 
> > > 
> > > 
> > > The IETF Secretariat.
> > > 
> > > 
> > 
> > 
> > --
> > to unsubscribe send a message to 
> radiusext-request@ops.ietf.org with 
> > the word 'unsubscribe' in a single line as the message text body.
> > archive: <http://psg.com/lists/radiusext/>
> 
> 


--
to unsubscribe send a message to radiusext-request@ops.ietf.org with
the word 'unsubscribe' in a single line as the message text body.
archive: <http://psg.com/lists/radiusext/>