[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

I-D ACTION:draft-ietf-v6ops-addr-select-req-01.txt



A New Internet-Draft is available from the on-line Internet-Drafts 
directories.
This draft is a work item of the IPv6 Operations Working Group of the IETF.

	Title		: Requirements for the address selection mechanisms
	Author(s)	: A. Matsumoto, et al.
	Filename	: draft-ietf-v6ops-addr-select-req-01.txt
	Pages		: 14
	Date		: 2007-2-21
	
RFC3484 defines source and destination address selection algorithms
   that are commonly deployed in current popular OSs.  Meanwhile, there
   is a possibility to provide multiple addresses in one physical
   network.  In such a multi-prefix environment, end-hosts could
   encounter some troubles in the communication because of default use
   of the RFC3484 mechanism.  Some mechanism for the address selection
   problems are proposed including RFC3484 policy table distribution and
   RFC3484-update.  This document describes the requirements for these
   address selection mechanisms.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-v6ops-addr-select-req-01.txt

To remove yourself from the I-D Announcement list, send a message to 
i-d-announce-request@ietf.org with the word unsubscribe in the body of 
the message. 
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.

Internet-Drafts are also available by anonymous FTP. Login with the 
username "anonymous" and a password of your e-mail address. After 
logging in, type "cd internet-drafts" and then 
"get draft-ietf-v6ops-addr-select-req-01.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt

Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-v6ops-addr-select-req-01.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.

Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
<ftp://ftp.ietf.org/internet-drafts/draft-ietf-v6ops-addr-select-req-01.txt>