[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: I-D Action:draft-ietf-v6ops-rfc3330-for-ipv6-04.txt



I think ISATAP are really out of scope of this document. The purpose of the document was not to list all possible IPv6 addresses constructs but listing the prefixes that need to be looked at for operators. Again, the genesis of this draft was a concensus among providers and IX operators during an informal IXv6 meeting on the need of a document to list all prefixes that are candidate to be filtered in some shape or form.

Marc.

Le 08-01-15 à 13:19, Templin, Fred L a écrit :

Jeffrey,

I hadn't thought about ACLs, and there is also the question
of IPv6 privacy addresses (RFC3041) that end up looking like
ISATAP addresses. I guess I could see the rescoping if there
were concern for addresses that look like ISATAP showing up
on prefixes assigned to non-ISATAP links. Is there reason
to be concerned about this?

Thanks - Fred
fred.l.templin@boeing.com


-----Original Message-----
From: Dunn, Jeffrey H. [mailto:jdunn@mitre.org]
Sent: Tuesday, January 15, 2008 9:59 AM
To: Templin, Fred L; Marc.Blanchet@viagenie.ca
Cc: v6ops@ops.ietf.org; Dunn, Jeffrey H.
Subject: RE: I-D Action:draft-ietf-v6ops-rfc3330-for-ipv6-04.txt

Fred,

Interesting idea. The problem I have is that ISATAP addresses are not
part of any address block. As a result, mentioning them would re- scope
the document, from describing "the global and other specialized IPv6
address blocks."  That is not to say it is a bad idea, since folks
tend
to research like documents to populate their ACLs.  Thoughts?

Best Regards,

Jeffrey Dunn
Info Systems Eng., Lead
MITRE Corporation.
-----Original Message-----
From: owner-v6ops@ops.ietf.org [mailto:owner-v6ops@ops.ietf.org] On
Behalf Of Templin, Fred L
Sent: Tuesday, January 15, 2008 12:20 PM
To: Marc.Blanchet@viagenie.ca
Cc: v6ops@ops.ietf.org; Templin, Fred L
Subject: FW: I-D Action:draft-ietf-v6ops-rfc3330-for-ipv6-04.txt

Marc,

Just seeing this now, I think maybe you should add ISATAP
addresses to this list (RFC4214). The address format is
also specified under the IANA ethernet-numbers registry.

The text of your draft could say that the address format
usage is limited to ISATAP links - but, it is important
to note the addresses as special-use.

Thanks - Fred
fred.l.templin@boeing.com

-----Original Message-----
From: Internet-Drafts@ietf.org [mailto:Internet-Drafts@ietf.org]
Sent: Tuesday, January 15, 2008 8:50 AM
To: i-d-announce@ietf.org
Cc: v6ops@ops.ietf.org
Subject: I-D Action:draft-ietf-v6ops-rfc3330-for-ipv6-04.txt

A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the IPv6 Operations Working Group of the
IETF.


	Title           : Special-Use IPv6 Addresses
	Author(s)       : M. Blanchet
	Filename        : draft-ietf-v6ops-rfc3330-for-ipv6-04.txt
	Pages           : 8
	Date            : 2008-01-15

This document describes the global and other specialized IPv6 address
blocks.  It does not address IPv6 address space assigned to operators
and users through the Regional Internet Registries.  These
descriptions are useful for route and IP filtering, for documentation
and other purposes.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-v6ops-rfc3330-f
or-ipv6-0
4
.txt

To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in
the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D- announce
to change your subscription settings.

Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
	"get draft-ietf-v6ops-rfc3330-for-ipv6-04.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt

Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE
/internet-drafts/draft-ietf-v6ops-rfc3330-for-ipv6-04.txt".

NOTE:   The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail
readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation
on
	how to manipulate these messages.

Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.


-----
IPv6 book: Migrating to IPv6, Wiley, 2006, http://www.ipv6book.ca