[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Fwd: Broadband Forum liaison to IETF on IPv6 security

Thomas,

The problem is IMHO the following: How to assign an IPv6 UGA to CPE hosts attached to a BMA LAN (usually Ethernet or Wi-Fi) that is in turn connected via a CPE router through an NBMA link (cable modem or DSL) to an ISP router that provides Internet access. Currently, there are two methods: SLAAC and DHCPv6. Each has its own problems. Thoughts?

Best Regards, 
 
Jeffrey Dunn 
Info Systems Eng., Lead 
MITRE Corporation.
(301) 448-6965 (mobile)


-----Original Message-----
From: ipv6-bounces@ietf.org [mailto:ipv6-bounces@ietf.org] On Behalf Of Thomas Narten
Sent: Friday, November 06, 2009 8:59 AM
To: Fred Baker
Cc: 6man-ads@tools.ietf.org; SAVI Mailing List; william.allen.simpson@gmail.com; Hesham Soliman; Erik Nordmark; savi-ads@tools.ietf.org; Robin Mersh; Susan Thomson; v6ops-ads@tools.ietf.org; IPv6 Operations; IETF IPv6 Mailing List; JINMEI Tatuya / çæéå
Subject: Re: Fwd: Broadband Forum liaison to IETF on IPv6 security

Is there a problem statement somewhere that describes the actual
problem for which a solution is needed?

Has this been put into an ID, for instance?

I haven't been able to get my head around the actual problem from the
(few) emails I've seen.

Thomas
--------------------------------------------------------------------
IETF IPv6 working group mailing list
ipv6@ietf.org
Administrative Requests: https://www.ietf.org/mailman/listinfo/ipv6
--------------------------------------------------------------------