[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: radius dynauth client/server mibs structure




Hi Bert, Dave,

The updated versions are attached.

Changes are:
- change 2005 into 2006 in DESCRIPTION of MIB
- group the scalars according the comment of Juergen
- add sentence "This counter wraps from the maximum value to zero and is
reset upon system (re)initialization." for all counters of type
Counter32
- remove ref to IANA copyright.
- some minor formatting (line breaks in the mib)

I tried a diff but that output is rather messy, so I sent you the complete drafts.

Thanks,
Stefaan


Nelson, David wrote:

Bert writes...


I am happy to chekc a pre-release rev 04 as well.


Stefaan DeCnodder writes...

Since the suggestion has sufficient support it is best to
do so. Is it Ok to sent a version -04 of both docs after the IETF containing all updates?


I think Bert would like to get this document revision submitted ASAP.
The IETF I-D Tracker tool has these documents in the "Revised I-D
Required" state.

Bert will be stepping down as O&M Area Director after IETF-65, so if
these documents are still awaiting IESG approval after next week, then
they will need to be handed off to another AD for shepherding.

-- Dave


--
to unsubscribe send a message to radiusext-request@ops.ietf.org with
the word 'unsubscribe' in a single line as the message text body.
archive: <http://psg.com/lists/radiusext/>



Network Working Group                                      S. De Cnodder
Internet-Draft                                                   Alcatel
Expires: September 14, 2006                                   N. Jonnala
                                                                M. Chiba
                                                     Cisco Systems, Inc.
                                                          March 13, 2006


                    Dynamic Authorization Server MIB
              draft-ietf-radext-dynauth-server-mib-04.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on September 14, 2006.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes the Remote Authentication Dial In User
   Service (RADIUS) [RFC2865] Dynamic Authorization Server (DAS)
   functions that support the dynamic authorization extensions as
   defined in RFC 3576.



De Cnodder, et al.     Expires September 14, 2006               [Page 1]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
     1.1.  Requirements notation  . . . . . . . . . . . . . . . . . .  3
     1.2.  Terminology  . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  The Internet-Standard Management Framework . . . . . . . . . .  4
   3.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
   4.  RADIUS Dynamic Authorization Server MIB Definitions  . . . . .  7
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . . 21
   6.  IANA considerations  . . . . . . . . . . . . . . . . . . . . . 22
   7.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 23
   8.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 24
     8.1.  Normative References . . . . . . . . . . . . . . . . . . . 24
     8.2.  Informative References . . . . . . . . . . . . . . . . . . 24
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 26
   Intellectual Property and Copyright Statements . . . . . . . . . . 27



































De Cnodder, et al.     Expires September 14, 2006               [Page 2]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


1.  Introduction

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   It is becoming increasingly important to support Dynamic
   Authorization extensions on the network access server (NAS) devices
   to handle the Disconnect and Change-of-Authorization (CoA) messages
   as described in [RFC3576].  As a result, the effective management of
   RADIUS Dynamic Authorization entities is of considerable importance.
   This RADIUS Dynamic Authorization Server (DAS) MIB complements the
   managed objects used for managing RADIUS authentication and
   accounting clients as described in [RFC2618bis] and [RFC2620bis],
   respectively.


   -- RFC Ed.: references [DYNSERV], [RFC2618bis], [RFC2619bis],
   --          [RFC2620bis], and [RFC2621bis] should be replaced by
   --          references to the corresponding RFC.

1.1.  Requirements notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

1.2.  Terminology

   Dynamic Authorization Server (DAS)

   The component that resides on the NAS which processes the Disconnect
   and Change-of-Authorization (CoA) Request packets [RFC3576] sent by
   the Dynamic Authorization Client.

   Dynamic Authorization Client (DAC)

   The component which sends Disconnect and CoA-Request packets to the
   Dynamic Authorization Server.  While often residing on the RADIUS
   server, it is also possible for this component to be located on a
   separate host, such as a Rating Engine.

   Dynamic Authorization Server Port

   The UDP port on which the Dynamic Authorization Server listens for
   the Disconnect and CoA requests sent by the Dynamic Authorization
   Client.






De Cnodder, et al.     Expires September 14, 2006               [Page 3]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


2.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC2578 [RFC2578], STD 58, RFC2579 [RFC2579] and STD 58, RFC2580
   [RFC2580].





































De Cnodder, et al.     Expires September 14, 2006               [Page 4]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


3.  Overview

   "Dynamic Authorization Extensions to RADIUS" [RFC3576] defines the
   operation of Disconnect-Request, Disconnect-ACK, Disconnect-NAK, CoA-
   Request, CoA-ACK and CoA-NAK packets.  Typically NAS devices
   implement the DAS function, and thus would be expected to implement
   the RADIUS Dynamic Authorization Server MIB, while DACs implement the
   client function, and thus would be expected to implement the RADIUS
   Dynamic Authorization Client MIB.

   However, it is possible for a RADIUS Dynamic Authorization entity to
   perform both client and server functions.  For example, a RADIUS
   proxy may act as a DAS to one or more DACs, while simultaneously
   acting as a DAC to one or more DASs.  In such situations, it is
   expected that RADIUS entities combining client and server
   functionality will support both the client and server MIBs.

   This memo describes the MIB for Dynamic Authorization Servers and
   relates to the following documents as follows:

   [RFC2618bis] describes the MIB for a RADIUS Auth Client MIB.

   [RFC2619bis] describes the MIB for a RADIUS Auth Server MIB.

   [RFC2620bis] describes the MIB for a RADIUS Acct Client MIB.

   [RFC2621bis] describes the MIB for a RADIUS Acct Server MIB.

   [DYNCLNT] describes the MIB for a RADIUS Dynamic Authorization
   Client.

   A NAS typically implements the MIBs for a RADIUS Authentication
   Client, a RADIUS accounting client, and a RADIUS Dynamic
   Authorization Server.  However, any one MIB can be implemented
   without implementing any of the other MIBs, i.e. the MIBs have no
   dependencies on each other.  A typical case would be for a device to
   implement the MIBs RADIUS authentication server, RADIUS accounting
   server and RADIUS Dynamic Authorization Client.  A RADIUS proxy might
   implement any, all or a subset of the MIBs listed above and the MIB
   as defined in this document.











De Cnodder, et al.     Expires September 14, 2006               [Page 5]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


              +---------------+                      +---------------+
    User 1----|               |  Disconnect-Request  |               |
              |    Dynamic    |     CoA-Request      |    Dynamic    |
    User 2----| Authorization |<---------------------| Authorization |
              |    Server     |--------------------->|    Client     |
    User 3----|     (DAS)     |    Disconnect-Ack    |     (DAC)     |
              |               |    Disconnect-NAK    |               |
              +---------------+    CoA-Ack/CoA-NAK   +---------------+

   Figure 1: Mapping of clients and servers.

   This MIB module for the Dynamic Authorization Server contains the
   following:

   1.  Three scalar objects, and

   2.  One Dynamic Authorization Client Table.  This table contains one
   row for each DAC with which the DAS shares a secret.

































De Cnodder, et al.     Expires September 14, 2006               [Page 6]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


4.  RADIUS Dynamic Authorization Server MIB Definitions

   RADIUS-DYNAUTH-SERVER-MIB DEFINITIONS ::= BEGIN

   IMPORTS
          MODULE-IDENTITY, OBJECT-TYPE,
          Counter32, Integer32, mib-2  FROM SNMPv2-SMI  -- [RFC2578]
          SnmpAdminString   FROM SNMP-FRAMEWORK-MIB     -- [RFC3411]
          InetAddressType,
          InetAddress   FROM INET-ADDRESS-MIB           -- [RFC4001]
          MODULE-COMPLIANCE,
          OBJECT-GROUP  FROM SNMPv2-CONF;               -- [RFC2580]

   radiusDynAuthServerMIB MODULE-IDENTITY
          LAST-UPDATED "200603100000Z" -- 10 March 2006
          ORGANIZATION "IETF RADEXT Working Group"
          CONTACT-INFO
                 " Stefaan De Cnodder
                   Alcatel
                   Francis Wellesplein 1
                   B-2018 Antwerp
                   Belgium

                   Phone: +32 3 240 85 15
                   EMail: stefaan.de_cnodder@alcatel.be

                   Nagi Reddy Jonnala
                   Cisco Systems, Inc.
                   Divyasree Chambers, B Wing,
                   O'Shaugnessy Road,
                   Bangalore-560027, India.

                   Phone: +91 98456 99445
                   EMail: njonnala@cisco.com

                   Murtaza Chiba
                   Cisco Systems, Inc.
                   170 West Tasman Dr.
                   San Jose CA, 95134

                   Phone: +1 408 525 7198
                   EMail: mchiba@cisco.com "
          DESCRIPTION
              "The MIB module for entities implementing the server
               side of the Dynamic Authorization Extensions to Remote
               Authentication Dial In User Service (RADIUS) protocol.

               Copyright (C) The Internet Society (2006).  Initial



De Cnodder, et al.     Expires September 14, 2006               [Page 7]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


               version as published in RFC yyyy;
               for full legal notices see the RFC its"
   -- RFC Ed.: replace yyyy with actual RFC number & remove this note

          REVISION "200603100000Z" -- 10 March 2006
          DESCRIPTION "Initial version as published in RFC yyyy."
   -- RFC Ed.: replace yyyy with actual RFC number & remove this note
          ::= { mib-2 xxx }
   -- The value xxx to be assigned by IANA.

   radiusDynAuthServerMIBObjects OBJECT IDENTIFIER ::=
                                         { radiusDynAuthServerMIB 1 }

   radiusDynAuthServerScalars    OBJECT IDENTIFIER ::=
                                  { radiusDynAuthServerMIBObjects 1 }

   radiusDynAuthServerDisconInvalidClientAddresses OBJECT-TYPE
         SYNTAX Counter32
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of Disconnect-Request packets received from
                unknown addresses. This counter wraps from the maximum
                value to zero and is reset upon system
                (re)initialization."
         ::= { radiusDynAuthServerScalars 1 }

   radiusDynAuthServerCoAInvalidClientAddresses OBJECT-TYPE
         SYNTAX Counter32
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of CoA-Request packets received from unknown
                addresses. This counter wraps from the maximum value to
                zero and is reset upon system (re)initialization."
         ::= { radiusDynAuthServerScalars 2 }

   radiusDynAuthServerIdentifier OBJECT-TYPE
         SYNTAX SnmpAdminString
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
                "The NAS-Identifier of the RADIUS Dynamic Authorization
                 Server. This is not necessarily the same as sysName in
                 MIB II."
         REFERENCE
                "RFC 2865, Section 5.32, NAS-Identifier."
         ::= { radiusDynAuthServerScalars 3 }



De Cnodder, et al.     Expires September 14, 2006               [Page 8]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


   radiusDynAuthClientTable OBJECT-TYPE
         SYNTAX SEQUENCE OF RadiusDynAuthClientEntry
         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
               "The (conceptual) table listing the RADIUS Dynamic
                Authorization Clients with which the server shares a
                secret."
         ::= { radiusDynAuthServerMIBObjects 2 }

   radiusDynAuthClientEntry OBJECT-TYPE
          SYNTAX     RadiusDynAuthClientEntry
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "An entry (conceptual row) representing one Dynamic
                 Authorization Client with which the server shares a
                 secret."
          INDEX      { radiusDynAuthClientIndex }
          ::= { radiusDynAuthClientTable 1 }

   RadiusDynAuthClientEntry ::= SEQUENCE {
          radiusDynAuthClientIndex                     Integer32,
          radiusDynAuthClientAddressType               InetAddressType,
          radiusDynAuthClientAddress                   InetAddress,
          radiusDynAuthServDisconRequests              Counter32,
          radiusDynAuthServDisconAuthOnlyRequests      Counter32,
          radiusDynAuthServDupDisconRequests           Counter32,
          radiusDynAuthServDisconAcks                  Counter32,
          radiusDynAuthServDisconNaks                  Counter32,
          radiusDynAuthServDisconNakAuthOnlyRequests   Counter32,
          radiusDynAuthServDisconNakSessNoContext      Counter32,
          radiusDynAuthServDisconUserSessRemoved       Counter32,
          radiusDynAuthServMalformedDisconRequests     Counter32,
          radiusDynAuthServDisconBadAuthenticators     Counter32,
          radiusDynAuthServDisconPacketsDropped        Counter32,
          radiusDynAuthServCoARequests                 Counter32,
          radiusDynAuthServCoAAuthOnlyRequests         Counter32,
          radiusDynAuthServDupCoARequests              Counter32,
          radiusDynAuthServCoAAcks                     Counter32,
          radiusDynAuthServCoANaks                     Counter32,
          radiusDynAuthServCoANakAuthOnlyRequests      Counter32,
          radiusDynAuthServCoANakSessNoContext         Counter32,
          radiusDynAuthServCoAUserSessChanged          Counter32,
          radiusDynAuthServMalformedCoARequests        Counter32,
          radiusDynAuthServCoABadAuthenticators        Counter32,
          radiusDynAuthServCoAPacketsDropped           Counter32,
          radiusDynAuthServUnknownTypes                Counter32



De Cnodder, et al.     Expires September 14, 2006               [Page 9]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


   }


   radiusDynAuthClientIndex OBJECT-TYPE
          SYNTAX     Integer32 (1..2147483647)
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "A number uniquely identifying each RADIUS Dynamic
                 Authorization Client with which this Dynamic
                 Authorization Server communicates. This number is
                 allocated by the agent implementing this MIB module,
                 and is unique in this context."
          ::= { radiusDynAuthClientEntry 1 }

   radiusDynAuthClientAddressType OBJECT-TYPE
          SYNTAX     InetAddressType
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The type of IP address of the RADIUS Dynamic
                 Authorization Client referred to in this table entry."
          ::= { radiusDynAuthClientEntry 2 }

   radiusDynAuthClientAddress OBJECT-TYPE
          SYNTAX     InetAddress
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The IP address value of the RADIUS Dynamic
                 Authorization Client referred to in this table entry,
                 using the version neutral IP address format."
          ::= { radiusDynAuthClientEntry 3 }

   radiusDynAuthServDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Requests received
                 from this Dynamic Authorization Client. This also
                 includes the RADIUS Disconnect-Requests that have a
                 Service-Type attribute with value 'Authorize Only'.
                 This counter wraps from the maximum value to zero and
                 is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."



De Cnodder, et al.     Expires September 14, 2006              [Page 10]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          ::= { radiusDynAuthClientEntry 4 }

   radiusDynAuthServDisconAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Requests that include
                 a Service-Type attribute with value 'Authorize Only'
                 received from this Dynamic Authorization Client. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 5 }

   radiusDynAuthServDupDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of duplicate RADIUS Disconnect-Request
                 packets received from this Dynamic Authorization
                 Client. This counter wraps from the maximum value to
                 zero and is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 6 }

   radiusDynAuthServDisconAcks  OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-ACK packets sent to
                 this Dynamic Authorization Client. This counter wraps
                 from the maximum value to zero and is reset upon system
                 (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 7 }

   radiusDynAuthServDisconNaks OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"



De Cnodder, et al.     Expires September 14, 2006              [Page 11]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 sent to this Dynamic Authorization Client. This
                 includes the RADIUS Disconnect-NAK packets sent
                 with a Service-Type attribute with value 'Authorize
                 Only' and the RADIUS Disconnect-NAK packets sent
                 because no session context was found. This counter
                 wraps from the maximum value to zero and is reset
                 upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 8 }

   radiusDynAuthServDisconNakAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets that
                 include a Service-Type attribute with value
                 'Authorize Only' sent to this Dynamic Authorization
                 Client. This counter wraps from the maximum value to
                 zero and is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 9 }

   radiusDynAuthServDisconNakSessNoContext OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 sent to this Dynamic Authorization Client
                 because no session context was found. This counter
                 wraps from the maximum value to zero and is reset
                 upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 10 }

   radiusDynAuthServDisconUserSessRemoved OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "sessions"



De Cnodder, et al.     Expires September 14, 2006              [Page 12]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of user sessions removed for the
                 Disconnect-Requests received from this
                 Dynamic Authorization Client. Depending on site
                 specific policies, a single Disconnect request
                 can remove multiple user sessions. In the case
                 that this Dynamic Authorization Server has no
                 knowledge of the number of user sessions that
                 are affected by a single request, for each such
                 Disconnect-Request, it will count as a single
                 affected user session only. This counter wraps from
                 the maximum value to zero and is reset upon system
                 (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 11 }

   radiusDynAuthServMalformedDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of malformed RADIUS Disconnect-Request
                 packets received from this Dynamic Authorization
                 Client. Bad authenticators and unknown types are not
                 included as malformed Disconnect-Requests. This counter
                 wraps from the maximum value to zero and is reset upon
                 system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 12 }

   radiusDynAuthServDisconBadAuthenticators OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Request packets
                 which contained invalid Authenticator field
                 received from this Dynamic Authorization Client. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE



De Cnodder, et al.     Expires September 14, 2006              [Page 13]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 13 }

   radiusDynAuthServDisconPacketsDropped OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming Disconnect-Requests
                 from this Dynamic Authorization Client silently
                 discarded by the server application for some reason
                 other than malformed, bad authenticators or unknown
                 types. This counter wraps from the maximum value to
                 zero and is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 14 }

   radiusDynAuthServCoARequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-requests received from this
                 Dynamic Authorization Client. This also includes
                 the CoA requests that have a Service-Type attribute
                 with value 'Authorize Only'. This counter wraps from
                 the maximum value to zero and is reset upon system
                 (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 15 }

   radiusDynAuthServCoAAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-requests that include a
                 Service-Type attribute with value 'Authorize Only'
                 received from this Dynamic Authorization Client. This
                 counter wraps from the maximum value to zero and is



De Cnodder, et al.     Expires September 14, 2006              [Page 14]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 16 }


   radiusDynAuthServDupCoARequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of duplicate RADIUS CoA-Request packets
                 received from this Dynamic Authorization Client. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 17 }

   radiusDynAuthServCoAAcks  OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-ACK packets sent to this
                 Dynamic Authorization Client. This counter wraps from
                 the maximum value to zero and is reset upon system
                 (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 18 }

   radiusDynAuthServCoANaks OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets sent to
                 this Dynamic Authorization Client. This includes
                 the RADIUS CoA-NAK packets sent with a Service-Type
                 attribute with value 'Authorize Only' and the RADIUS
                 CoA-NAK packets sent because no session context was



De Cnodder, et al.     Expires September 14, 2006              [Page 15]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                 found. This counter wraps from the maximum value to
                 zero and is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 19 }

   radiusDynAuthServCoANakAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets that include a
                 Service-Type attribute with value 'Authorize Only'
                 sent to this Dynamic Authorization Client. This counter
                 wraps from the maximum value to zero and is reset upon
                 system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 20 }

   radiusDynAuthServCoANakSessNoContext OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets sent to this
                 Dynamic Authorization Client because no session context
                 was found. This counter wraps from the maximum value to
                 zero and is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 21 }

   radiusDynAuthServCoAUserSessChanged OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "sessions"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of user sessions authorization
                 changed for the CoA-Requests received from this
                 Dynamic Authorization Client. Depending on site
                 specific policies, a single CoA request can change



De Cnodder, et al.     Expires September 14, 2006              [Page 16]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                 multiple user sessions' authorization.  In the case
                 this Dynamic Authorization Server has no knowledge of
                 the number of user sessions that are affected by a
                 single request, for each such CoA-Request, it will
                 count as a single affected user session only. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 22 }

   radiusDynAuthServMalformedCoARequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of malformed RADIUS CoA-Request packets
                 received from this Dynamic Authorization Client. Bad
                 authenticators and unknown types are not included as
                 malformed CoA-Requests. This counter wraps from the
                 maximum value to zero and is reset upon system
                 (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry  23 }

   radiusDynAuthServCoABadAuthenticators OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-Request packets which
                 contained invalid Authenticator field received
                 from this Dynamic Authorization Client. This counter
                 wraps from the maximum value to zero and is reset
                 upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 24 }

   radiusDynAuthServCoAPacketsDropped OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"



De Cnodder, et al.     Expires September 14, 2006              [Page 17]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming CoA packets from this
                 Dynamic Authorization Client silently discarded
                 by the server application for some reason other than
                 malformed, bad authenticators or unknown types. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 25 }

   radiusDynAuthServUnknownTypes OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming packets of unknown types which
                 were received on the Dynamic Authorization port. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 26 }

   -- conformance information

   radiusDynAuthServerMIBConformance
          OBJECT IDENTIFIER ::= { radiusDynAuthServerMIB 2 }
   radiusDynAuthServerMIBCompliances
          OBJECT IDENTIFIER ::= { radiusDynAuthServerMIBConformance 1 }
   radiusDynAuthServerMIBGroups
          OBJECT IDENTIFIER ::= { radiusDynAuthServerMIBConformance 2 }

   -- compliance statements

   radiusAuthServerMIBCompliance MODULE-COMPLIANCE
          STATUS  current
          DESCRIPTION
                "The compliance statement for entities implementing
                 the RADIUS Dynamic Authorization Server."
          MODULE  -- this module
          MANDATORY-GROUPS { radiusDynAuthServerMIBGroup }

          GROUP              radiusDynAuthServerAuthOnlyGroup



De Cnodder, et al.     Expires September 14, 2006              [Page 18]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          DESCRIPTION
                "Only required for Dynamic Authorization Clients that
                 are supporting Service-Type attributes with value
                 'Authorize-Only'."


          GROUP              radiusDynAuthServerNoSessGroup
          DESCRIPTION
                "This group is not required in case the Dynamic
                 Authorization Server can not easily determine whether
                 a session exists or not (e.g., in case of a RADIUS
                 proxy)."

          ::= { radiusDynAuthServerMIBCompliances 1 }

   -- units of conformance

   radiusDynAuthServerMIBGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthServerDisconInvalidClientAddresses,
                    radiusDynAuthServerCoAInvalidClientAddresses,
                    radiusDynAuthServerIdentifier,
                    radiusDynAuthClientAddressType,
                    radiusDynAuthClientAddress,
                    radiusDynAuthServDisconRequests,
                    radiusDynAuthServDupDisconRequests,
                    radiusDynAuthServDisconAcks,
                    radiusDynAuthServDisconNaks,
                    radiusDynAuthServDisconUserSessRemoved,
                    radiusDynAuthServMalformedDisconRequests,
                    radiusDynAuthServDisconBadAuthenticators,
                    radiusDynAuthServDisconPacketsDropped,
                    radiusDynAuthServCoARequests,
                    radiusDynAuthServDupCoARequests,
                    radiusDynAuthServCoAAcks,
                    radiusDynAuthServCoANaks,
                    radiusDynAuthServCoAUserSessChanged,
                    radiusDynAuthServMalformedCoARequests,
                    radiusDynAuthServCoABadAuthenticators,
                    radiusDynAuthServCoAPacketsDropped,
                    radiusDynAuthServUnknownTypes
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects providing management of
                 a RADIUS Dynamic Authorization Server."
          ::= { radiusDynAuthServerMIBGroups 1 }

   radiusDynAuthServerAuthOnlyGroup OBJECT-GROUP



De Cnodder, et al.     Expires September 14, 2006              [Page 19]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          OBJECTS { radiusDynAuthServDisconAuthOnlyRequests,
                    radiusDynAuthServDisconNakAuthOnlyRequests,
                    radiusDynAuthServCoAAuthOnlyRequests,
                    radiusDynAuthServCoANakAuthOnlyRequests
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects supporting the RADIUS
                 messages including Service-Type attribute with
                 value 'Authorize Only'."
          ::= { radiusDynAuthServerMIBGroups 2 }

   radiusDynAuthServerNoSessGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthServDisconNakSessNoContext,
                    radiusDynAuthServCoANakSessNoContext
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects supporting the RADIUS
                 messages that are referring to non existing sessions."
          ::= { radiusDynAuthServerMIBGroups 3 }



   END


























De Cnodder, et al.     Expires September 14, 2006              [Page 20]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


5.  Security Considerations

   There are no management objects defined in this MIB module that have
   a MAX-ACCESS clause of read-write and/or read-create.  So, if this
   MIB module is implemented correctly, then there is no risk that an
   intruder can alter or create any management objects of this MIB
   module via direct SNMP SET operations

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:

   radiusDynAuthClientAddress and radiusDynAuthClientAddressType

   These can be used to determine the address of the DAC with which the
   DAS is communicating.  This information could be useful in mounting
   an attack on the DAC.

   radiusDynAuthServerIdentifier

   This can be used to determine the Identifier of the DAS.  This
   information could be useful in impersonating the DAS.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPsec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.






De Cnodder, et al.     Expires September 14, 2006              [Page 21]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


6.  IANA considerations

   IANA is requested to assign an OID xxx under mib-2.
















































De Cnodder, et al.     Expires September 14, 2006              [Page 22]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


7.  Acknowledgements

   The authors would also like to acknowledge the following people for
   their comments on this document: Bernard Aboba, Alan DeKok, David
   Nelson, Anjaneyulu Pata, Dan Romascanu, Juergen Schoenwaelder, Greg
   Weber, Bert Wijnen, and Glen Zorn.













































De Cnodder, et al.     Expires September 14, 2006              [Page 23]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", RFC 2119, March 1997.

   [RFC2578]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Structure of Management
              Information Version 2 (SMIv2)", STD 58, RFC 2578,
              April 1999.

   [RFC2579]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Textual Conventions for
              SMIv2", STD 58, RFC 2579, April 1999.

   [RFC2580]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Conformance Statements for
              SMIv2", STD 58, RFC 2580, April 1999.

   [RFC3411]  Harrington, D., Presuhn, R., and B. Wijnen, "An
              Architecture for Describing Simple Network Management
              Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
              December 2002.

   [RFC3576]  Chiba, M., Dommety, G., Eklund, M., Mitton, D., and B.
              Aboba, "Dynamic Authorization Extensions to Remote
              Authentication Dial In User Service (RADIUS)", RFC 3576,
              July 2003.

   [RFC4001]  Daniele, M. and et al., "Textual Conventions for Internet
              Network Addresses", RFC 4001, February 2005.

8.2.  Informative References

   [DYNCLNT]  De Cnodder, S., Jonnala, N., and M. Chiba, "RADIUS Dynamic
              Authorization Client MIB",
              draft-ietf-radext-dynauth-client-mib-03.txt, work in
              progress, December 2005.

   [RFC2618bis]
              Nelson, D., "RADIUS Auth Client MIB (IPv6)",
              draft-ietf-radext-rfc2618bis-01.txt work in progress,
              October 2005.

   [RFC2619bis]
              Nelson, D., "RADIUS Auth Server MIB (IPv6)",
              draft-ietf-radext-rfc2619bis-01.txt work in progress,



De Cnodder, et al.     Expires September 14, 2006              [Page 24]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


              October 2005.

   [RFC2620bis]
              Nelson, D., "RADIUS Acct Client MIB (IPv6)",
              draft-ietf-radext-rfc2620bis-01.txt work in progress,
              October 2005.

   [RFC2621bis]
              Nelson, D., "RADIUS Acct Server MIB (IPv6)",
              draft-ietf-radext-rfc2621bis-01.txt work in progress,
              October 2005.

   [RFC2865]  Rigney, C., Willens, S., Rubens, A., and W. Simpson,
              "Remote Authentication Dial In User Service (RADIUS)",
              RFC 2865, June 2000.

   [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
              "Introduction and Applicability Statements for Internet-
              Standard Management Framework", RFC 3410, December 2002.
































De Cnodder, et al.     Expires September 14, 2006              [Page 25]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


Authors' Addresses

   Stefaan De Cnodder
   Alcatel
   Francis Wellesplein 1
   B-2018 Antwerp
   Belgium

   Phone: +32 3 240 85 15
   Email: stefaan.de_cnodder@alcatel.be


   Nagi Reddy Jonnala
   Cisco Systems, Inc.
   Divyasree Chambers,  B Wing, O'Shaugnessy Road
   Bangalore-560027, India

   Phone: +91 98456 99445
   Email: njonnala@cisco.com


   Murtaza Chiba
   Cisco Systems, Inc.
   170 West Tasman Dr.
   San Jose CA, 95134

   Phone: +1 408 525 7198
   Email: mchiba@cisco.com























De Cnodder, et al.     Expires September 14, 2006              [Page 26]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2006).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




De Cnodder, et al.     Expires September 14, 2006              [Page 27]





Network Working Group                                      S. De Cnodder
Internet-Draft                                                   Alcatel
Expires: September 14, 2006                                   N. Jonnala
                                                                M. Chiba
                                                     Cisco Systems, Inc.
                                                          March 13, 2006


                    Dynamic Authorization Server MIB
              draft-ietf-radext-dynauth-server-mib-04.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on September 14, 2006.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes the Remote Authentication Dial In User
   Service (RADIUS) [RFC2865] Dynamic Authorization Server (DAS)
   functions that support the dynamic authorization extensions as
   defined in RFC 3576.



De Cnodder, et al.     Expires September 14, 2006               [Page 1]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
     1.1.  Requirements notation  . . . . . . . . . . . . . . . . . .  3
     1.2.  Terminology  . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  The Internet-Standard Management Framework . . . . . . . . . .  4
   3.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
   4.  RADIUS Dynamic Authorization Server MIB Definitions  . . . . .  7
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . . 21
   6.  IANA considerations  . . . . . . . . . . . . . . . . . . . . . 22
   7.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 23
   8.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 24
     8.1.  Normative References . . . . . . . . . . . . . . . . . . . 24
     8.2.  Informative References . . . . . . . . . . . . . . . . . . 24
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 26
   Intellectual Property and Copyright Statements . . . . . . . . . . 27



































De Cnodder, et al.     Expires September 14, 2006               [Page 2]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


1.  Introduction

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   It is becoming increasingly important to support Dynamic
   Authorization extensions on the network access server (NAS) devices
   to handle the Disconnect and Change-of-Authorization (CoA) messages
   as described in [RFC3576].  As a result, the effective management of
   RADIUS Dynamic Authorization entities is of considerable importance.
   This RADIUS Dynamic Authorization Server (DAS) MIB complements the
   managed objects used for managing RADIUS authentication and
   accounting clients as described in [RFC2618bis] and [RFC2620bis],
   respectively.


   -- RFC Ed.: references [DYNSERV], [RFC2618bis], [RFC2619bis],
   --          [RFC2620bis], and [RFC2621bis] should be replaced by
   --          references to the corresponding RFC.

1.1.  Requirements notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

1.2.  Terminology

   Dynamic Authorization Server (DAS)

   The component that resides on the NAS which processes the Disconnect
   and Change-of-Authorization (CoA) Request packets [RFC3576] sent by
   the Dynamic Authorization Client.

   Dynamic Authorization Client (DAC)

   The component which sends Disconnect and CoA-Request packets to the
   Dynamic Authorization Server.  While often residing on the RADIUS
   server, it is also possible for this component to be located on a
   separate host, such as a Rating Engine.

   Dynamic Authorization Server Port

   The UDP port on which the Dynamic Authorization Server listens for
   the Disconnect and CoA requests sent by the Dynamic Authorization
   Client.






De Cnodder, et al.     Expires September 14, 2006               [Page 3]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


2.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC2578 [RFC2578], STD 58, RFC2579 [RFC2579] and STD 58, RFC2580
   [RFC2580].





































De Cnodder, et al.     Expires September 14, 2006               [Page 4]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


3.  Overview

   "Dynamic Authorization Extensions to RADIUS" [RFC3576] defines the
   operation of Disconnect-Request, Disconnect-ACK, Disconnect-NAK, CoA-
   Request, CoA-ACK and CoA-NAK packets.  Typically NAS devices
   implement the DAS function, and thus would be expected to implement
   the RADIUS Dynamic Authorization Server MIB, while DACs implement the
   client function, and thus would be expected to implement the RADIUS
   Dynamic Authorization Client MIB.

   However, it is possible for a RADIUS Dynamic Authorization entity to
   perform both client and server functions.  For example, a RADIUS
   proxy may act as a DAS to one or more DACs, while simultaneously
   acting as a DAC to one or more DASs.  In such situations, it is
   expected that RADIUS entities combining client and server
   functionality will support both the client and server MIBs.

   This memo describes the MIB for Dynamic Authorization Servers and
   relates to the following documents as follows:

   [RFC2618bis] describes the MIB for a RADIUS Auth Client MIB.

   [RFC2619bis] describes the MIB for a RADIUS Auth Server MIB.

   [RFC2620bis] describes the MIB for a RADIUS Acct Client MIB.

   [RFC2621bis] describes the MIB for a RADIUS Acct Server MIB.

   [DYNCLNT] describes the MIB for a RADIUS Dynamic Authorization
   Client.

   A NAS typically implements the MIBs for a RADIUS Authentication
   Client, a RADIUS accounting client, and a RADIUS Dynamic
   Authorization Server.  However, any one MIB can be implemented
   without implementing any of the other MIBs, i.e. the MIBs have no
   dependencies on each other.  A typical case would be for a device to
   implement the MIBs RADIUS authentication server, RADIUS accounting
   server and RADIUS Dynamic Authorization Client.  A RADIUS proxy might
   implement any, all or a subset of the MIBs listed above and the MIB
   as defined in this document.











De Cnodder, et al.     Expires September 14, 2006               [Page 5]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


              +---------------+                      +---------------+
    User 1----|               |  Disconnect-Request  |               |
              |    Dynamic    |     CoA-Request      |    Dynamic    |
    User 2----| Authorization |<---------------------| Authorization |
              |    Server     |--------------------->|    Client     |
    User 3----|     (DAS)     |    Disconnect-Ack    |     (DAC)     |
              |               |    Disconnect-NAK    |               |
              +---------------+    CoA-Ack/CoA-NAK   +---------------+

   Figure 1: Mapping of clients and servers.

   This MIB module for the Dynamic Authorization Server contains the
   following:

   1.  Three scalar objects, and

   2.  One Dynamic Authorization Client Table.  This table contains one
   row for each DAC with which the DAS shares a secret.

































De Cnodder, et al.     Expires September 14, 2006               [Page 6]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


4.  RADIUS Dynamic Authorization Server MIB Definitions

   RADIUS-DYNAUTH-SERVER-MIB DEFINITIONS ::= BEGIN

   IMPORTS
          MODULE-IDENTITY, OBJECT-TYPE,
          Counter32, Integer32, mib-2  FROM SNMPv2-SMI  -- [RFC2578]
          SnmpAdminString   FROM SNMP-FRAMEWORK-MIB     -- [RFC3411]
          InetAddressType,
          InetAddress   FROM INET-ADDRESS-MIB           -- [RFC4001]
          MODULE-COMPLIANCE,
          OBJECT-GROUP  FROM SNMPv2-CONF;               -- [RFC2580]

   radiusDynAuthServerMIB MODULE-IDENTITY
          LAST-UPDATED "200603100000Z" -- 10 March 2006
          ORGANIZATION "IETF RADEXT Working Group"
          CONTACT-INFO
                 " Stefaan De Cnodder
                   Alcatel
                   Francis Wellesplein 1
                   B-2018 Antwerp
                   Belgium

                   Phone: +32 3 240 85 15
                   EMail: stefaan.de_cnodder@alcatel.be

                   Nagi Reddy Jonnala
                   Cisco Systems, Inc.
                   Divyasree Chambers, B Wing,
                   O'Shaugnessy Road,
                   Bangalore-560027, India.

                   Phone: +91 98456 99445
                   EMail: njonnala@cisco.com

                   Murtaza Chiba
                   Cisco Systems, Inc.
                   170 West Tasman Dr.
                   San Jose CA, 95134

                   Phone: +1 408 525 7198
                   EMail: mchiba@cisco.com "
          DESCRIPTION
              "The MIB module for entities implementing the server
               side of the Dynamic Authorization Extensions to Remote
               Authentication Dial In User Service (RADIUS) protocol.

               Copyright (C) The Internet Society (2006).  Initial



De Cnodder, et al.     Expires September 14, 2006               [Page 7]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


               version as published in RFC yyyy;
               for full legal notices see the RFC its"
   -- RFC Ed.: replace yyyy with actual RFC number & remove this note

          REVISION "200603100000Z" -- 10 March 2006
          DESCRIPTION "Initial version as published in RFC yyyy."
   -- RFC Ed.: replace yyyy with actual RFC number & remove this note
          ::= { mib-2 xxx }
   -- The value xxx to be assigned by IANA.

   radiusDynAuthServerMIBObjects OBJECT IDENTIFIER ::=
                                         { radiusDynAuthServerMIB 1 }

   radiusDynAuthServerScalars    OBJECT IDENTIFIER ::=
                                  { radiusDynAuthServerMIBObjects 1 }

   radiusDynAuthServerDisconInvalidClientAddresses OBJECT-TYPE
         SYNTAX Counter32
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of Disconnect-Request packets received from
                unknown addresses. This counter wraps from the maximum
                value to zero and is reset upon system
                (re)initialization."
         ::= { radiusDynAuthServerScalars 1 }

   radiusDynAuthServerCoAInvalidClientAddresses OBJECT-TYPE
         SYNTAX Counter32
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
               "The number of CoA-Request packets received from unknown
                addresses. This counter wraps from the maximum value to
                zero and is reset upon system (re)initialization."
         ::= { radiusDynAuthServerScalars 2 }

   radiusDynAuthServerIdentifier OBJECT-TYPE
         SYNTAX SnmpAdminString
         MAX-ACCESS read-only
         STATUS current
         DESCRIPTION
                "The NAS-Identifier of the RADIUS Dynamic Authorization
                 Server. This is not necessarily the same as sysName in
                 MIB II."
         REFERENCE
                "RFC 2865, Section 5.32, NAS-Identifier."
         ::= { radiusDynAuthServerScalars 3 }



De Cnodder, et al.     Expires September 14, 2006               [Page 8]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


   radiusDynAuthClientTable OBJECT-TYPE
         SYNTAX SEQUENCE OF RadiusDynAuthClientEntry
         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
               "The (conceptual) table listing the RADIUS Dynamic
                Authorization Clients with which the server shares a
                secret."
         ::= { radiusDynAuthServerMIBObjects 2 }

   radiusDynAuthClientEntry OBJECT-TYPE
          SYNTAX     RadiusDynAuthClientEntry
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "An entry (conceptual row) representing one Dynamic
                 Authorization Client with which the server shares a
                 secret."
          INDEX      { radiusDynAuthClientIndex }
          ::= { radiusDynAuthClientTable 1 }

   RadiusDynAuthClientEntry ::= SEQUENCE {
          radiusDynAuthClientIndex                     Integer32,
          radiusDynAuthClientAddressType               InetAddressType,
          radiusDynAuthClientAddress                   InetAddress,
          radiusDynAuthServDisconRequests              Counter32,
          radiusDynAuthServDisconAuthOnlyRequests      Counter32,
          radiusDynAuthServDupDisconRequests           Counter32,
          radiusDynAuthServDisconAcks                  Counter32,
          radiusDynAuthServDisconNaks                  Counter32,
          radiusDynAuthServDisconNakAuthOnlyRequests   Counter32,
          radiusDynAuthServDisconNakSessNoContext      Counter32,
          radiusDynAuthServDisconUserSessRemoved       Counter32,
          radiusDynAuthServMalformedDisconRequests     Counter32,
          radiusDynAuthServDisconBadAuthenticators     Counter32,
          radiusDynAuthServDisconPacketsDropped        Counter32,
          radiusDynAuthServCoARequests                 Counter32,
          radiusDynAuthServCoAAuthOnlyRequests         Counter32,
          radiusDynAuthServDupCoARequests              Counter32,
          radiusDynAuthServCoAAcks                     Counter32,
          radiusDynAuthServCoANaks                     Counter32,
          radiusDynAuthServCoANakAuthOnlyRequests      Counter32,
          radiusDynAuthServCoANakSessNoContext         Counter32,
          radiusDynAuthServCoAUserSessChanged          Counter32,
          radiusDynAuthServMalformedCoARequests        Counter32,
          radiusDynAuthServCoABadAuthenticators        Counter32,
          radiusDynAuthServCoAPacketsDropped           Counter32,
          radiusDynAuthServUnknownTypes                Counter32



De Cnodder, et al.     Expires September 14, 2006               [Page 9]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


   }


   radiusDynAuthClientIndex OBJECT-TYPE
          SYNTAX     Integer32 (1..2147483647)
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "A number uniquely identifying each RADIUS Dynamic
                 Authorization Client with which this Dynamic
                 Authorization Server communicates. This number is
                 allocated by the agent implementing this MIB module,
                 and is unique in this context."
          ::= { radiusDynAuthClientEntry 1 }

   radiusDynAuthClientAddressType OBJECT-TYPE
          SYNTAX     InetAddressType
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The type of IP address of the RADIUS Dynamic
                 Authorization Client referred to in this table entry."
          ::= { radiusDynAuthClientEntry 2 }

   radiusDynAuthClientAddress OBJECT-TYPE
          SYNTAX     InetAddress
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The IP address value of the RADIUS Dynamic
                 Authorization Client referred to in this table entry,
                 using the version neutral IP address format."
          ::= { radiusDynAuthClientEntry 3 }

   radiusDynAuthServDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Requests received
                 from this Dynamic Authorization Client. This also
                 includes the RADIUS Disconnect-Requests that have a
                 Service-Type attribute with value 'Authorize Only'.
                 This counter wraps from the maximum value to zero and
                 is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."



De Cnodder, et al.     Expires September 14, 2006              [Page 10]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          ::= { radiusDynAuthClientEntry 4 }

   radiusDynAuthServDisconAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Requests that include
                 a Service-Type attribute with value 'Authorize Only'
                 received from this Dynamic Authorization Client. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 5 }

   radiusDynAuthServDupDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of duplicate RADIUS Disconnect-Request
                 packets received from this Dynamic Authorization
                 Client. This counter wraps from the maximum value to
                 zero and is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 6 }

   radiusDynAuthServDisconAcks  OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-ACK packets sent to
                 this Dynamic Authorization Client. This counter wraps
                 from the maximum value to zero and is reset upon system
                 (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 7 }

   radiusDynAuthServDisconNaks OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"



De Cnodder, et al.     Expires September 14, 2006              [Page 11]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 sent to this Dynamic Authorization Client. This
                 includes the RADIUS Disconnect-NAK packets sent
                 with a Service-Type attribute with value 'Authorize
                 Only' and the RADIUS Disconnect-NAK packets sent
                 because no session context was found. This counter
                 wraps from the maximum value to zero and is reset
                 upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 8 }

   radiusDynAuthServDisconNakAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets that
                 include a Service-Type attribute with value
                 'Authorize Only' sent to this Dynamic Authorization
                 Client. This counter wraps from the maximum value to
                 zero and is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 9 }

   radiusDynAuthServDisconNakSessNoContext OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 sent to this Dynamic Authorization Client
                 because no session context was found. This counter
                 wraps from the maximum value to zero and is reset
                 upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 10 }

   radiusDynAuthServDisconUserSessRemoved OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "sessions"



De Cnodder, et al.     Expires September 14, 2006              [Page 12]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of user sessions removed for the
                 Disconnect-Requests received from this
                 Dynamic Authorization Client. Depending on site
                 specific policies, a single Disconnect request
                 can remove multiple user sessions. In the case
                 that this Dynamic Authorization Server has no
                 knowledge of the number of user sessions that
                 are affected by a single request, for each such
                 Disconnect-Request, it will count as a single
                 affected user session only. This counter wraps from
                 the maximum value to zero and is reset upon system
                 (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthClientEntry 11 }

   radiusDynAuthServMalformedDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of malformed RADIUS Disconnect-Request
                 packets received from this Dynamic Authorization
                 Client. Bad authenticators and unknown types are not
                 included as malformed Disconnect-Requests. This counter
                 wraps from the maximum value to zero and is reset upon
                 system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 12 }

   radiusDynAuthServDisconBadAuthenticators OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Request packets
                 which contained invalid Authenticator field
                 received from this Dynamic Authorization Client. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE



De Cnodder, et al.     Expires September 14, 2006              [Page 13]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 13 }

   radiusDynAuthServDisconPacketsDropped OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming Disconnect-Requests
                 from this Dynamic Authorization Client silently
                 discarded by the server application for some reason
                 other than malformed, bad authenticators or unknown
                 types. This counter wraps from the maximum value to
                 zero and is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 14 }

   radiusDynAuthServCoARequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-requests received from this
                 Dynamic Authorization Client. This also includes
                 the CoA requests that have a Service-Type attribute
                 with value 'Authorize Only'. This counter wraps from
                 the maximum value to zero and is reset upon system
                 (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 15 }

   radiusDynAuthServCoAAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-requests that include a
                 Service-Type attribute with value 'Authorize Only'
                 received from this Dynamic Authorization Client. This
                 counter wraps from the maximum value to zero and is



De Cnodder, et al.     Expires September 14, 2006              [Page 14]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 16 }


   radiusDynAuthServDupCoARequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of duplicate RADIUS CoA-Request packets
                 received from this Dynamic Authorization Client. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 17 }

   radiusDynAuthServCoAAcks  OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-ACK packets sent to this
                 Dynamic Authorization Client. This counter wraps from
                 the maximum value to zero and is reset upon system
                 (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 18 }

   radiusDynAuthServCoANaks OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets sent to
                 this Dynamic Authorization Client. This includes
                 the RADIUS CoA-NAK packets sent with a Service-Type
                 attribute with value 'Authorize Only' and the RADIUS
                 CoA-NAK packets sent because no session context was



De Cnodder, et al.     Expires September 14, 2006              [Page 15]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                 found. This counter wraps from the maximum value to
                 zero and is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 19 }

   radiusDynAuthServCoANakAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets that include a
                 Service-Type attribute with value 'Authorize Only'
                 sent to this Dynamic Authorization Client. This counter
                 wraps from the maximum value to zero and is reset upon
                 system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 20 }

   radiusDynAuthServCoANakSessNoContext OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets sent to this
                 Dynamic Authorization Client because no session context
                 was found. This counter wraps from the maximum value to
                 zero and is reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 21 }

   radiusDynAuthServCoAUserSessChanged OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "sessions"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of user sessions authorization
                 changed for the CoA-Requests received from this
                 Dynamic Authorization Client. Depending on site
                 specific policies, a single CoA request can change



De Cnodder, et al.     Expires September 14, 2006              [Page 16]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


                 multiple user sessions' authorization.  In the case
                 this Dynamic Authorization Server has no knowledge of
                 the number of user sessions that are affected by a
                 single request, for each such CoA-Request, it will
                 count as a single affected user session only. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthClientEntry 22 }

   radiusDynAuthServMalformedCoARequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of malformed RADIUS CoA-Request packets
                 received from this Dynamic Authorization Client. Bad
                 authenticators and unknown types are not included as
                 malformed CoA-Requests. This counter wraps from the
                 maximum value to zero and is reset upon system
                 (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry  23 }

   radiusDynAuthServCoABadAuthenticators OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-Request packets which
                 contained invalid Authenticator field received
                 from this Dynamic Authorization Client. This counter
                 wraps from the maximum value to zero and is reset
                 upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 24 }

   radiusDynAuthServCoAPacketsDropped OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"



De Cnodder, et al.     Expires September 14, 2006              [Page 17]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming CoA packets from this
                 Dynamic Authorization Client silently discarded
                 by the server application for some reason other than
                 malformed, bad authenticators or unknown types. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 25 }

   radiusDynAuthServUnknownTypes OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming packets of unknown types which
                 were received on the Dynamic Authorization port. This
                 counter wraps from the maximum value to zero and is
                 reset upon system (re)initialization."
          REFERENCE
                "RFC 3576, Section 2.3, Packet Format."
          ::= { radiusDynAuthClientEntry 26 }

   -- conformance information

   radiusDynAuthServerMIBConformance
          OBJECT IDENTIFIER ::= { radiusDynAuthServerMIB 2 }
   radiusDynAuthServerMIBCompliances
          OBJECT IDENTIFIER ::= { radiusDynAuthServerMIBConformance 1 }
   radiusDynAuthServerMIBGroups
          OBJECT IDENTIFIER ::= { radiusDynAuthServerMIBConformance 2 }

   -- compliance statements

   radiusAuthServerMIBCompliance MODULE-COMPLIANCE
          STATUS  current
          DESCRIPTION
                "The compliance statement for entities implementing
                 the RADIUS Dynamic Authorization Server."
          MODULE  -- this module
          MANDATORY-GROUPS { radiusDynAuthServerMIBGroup }

          GROUP              radiusDynAuthServerAuthOnlyGroup



De Cnodder, et al.     Expires September 14, 2006              [Page 18]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          DESCRIPTION
                "Only required for Dynamic Authorization Clients that
                 are supporting Service-Type attributes with value
                 'Authorize-Only'."


          GROUP              radiusDynAuthServerNoSessGroup
          DESCRIPTION
                "This group is not required in case the Dynamic
                 Authorization Server can not easily determine whether
                 a session exists or not (e.g., in case of a RADIUS
                 proxy)."

          ::= { radiusDynAuthServerMIBCompliances 1 }

   -- units of conformance

   radiusDynAuthServerMIBGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthServerDisconInvalidClientAddresses,
                    radiusDynAuthServerCoAInvalidClientAddresses,
                    radiusDynAuthServerIdentifier,
                    radiusDynAuthClientAddressType,
                    radiusDynAuthClientAddress,
                    radiusDynAuthServDisconRequests,
                    radiusDynAuthServDupDisconRequests,
                    radiusDynAuthServDisconAcks,
                    radiusDynAuthServDisconNaks,
                    radiusDynAuthServDisconUserSessRemoved,
                    radiusDynAuthServMalformedDisconRequests,
                    radiusDynAuthServDisconBadAuthenticators,
                    radiusDynAuthServDisconPacketsDropped,
                    radiusDynAuthServCoARequests,
                    radiusDynAuthServDupCoARequests,
                    radiusDynAuthServCoAAcks,
                    radiusDynAuthServCoANaks,
                    radiusDynAuthServCoAUserSessChanged,
                    radiusDynAuthServMalformedCoARequests,
                    radiusDynAuthServCoABadAuthenticators,
                    radiusDynAuthServCoAPacketsDropped,
                    radiusDynAuthServUnknownTypes
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects providing management of
                 a RADIUS Dynamic Authorization Server."
          ::= { radiusDynAuthServerMIBGroups 1 }

   radiusDynAuthServerAuthOnlyGroup OBJECT-GROUP



De Cnodder, et al.     Expires September 14, 2006              [Page 19]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


          OBJECTS { radiusDynAuthServDisconAuthOnlyRequests,
                    radiusDynAuthServDisconNakAuthOnlyRequests,
                    radiusDynAuthServCoAAuthOnlyRequests,
                    radiusDynAuthServCoANakAuthOnlyRequests
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects supporting the RADIUS
                 messages including Service-Type attribute with
                 value 'Authorize Only'."
          ::= { radiusDynAuthServerMIBGroups 2 }

   radiusDynAuthServerNoSessGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthServDisconNakSessNoContext,
                    radiusDynAuthServCoANakSessNoContext
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects supporting the RADIUS
                 messages that are referring to non existing sessions."
          ::= { radiusDynAuthServerMIBGroups 3 }



   END


























De Cnodder, et al.     Expires September 14, 2006              [Page 20]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


5.  Security Considerations

   There are no management objects defined in this MIB module that have
   a MAX-ACCESS clause of read-write and/or read-create.  So, if this
   MIB module is implemented correctly, then there is no risk that an
   intruder can alter or create any management objects of this MIB
   module via direct SNMP SET operations

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:

   radiusDynAuthClientAddress and radiusDynAuthClientAddressType

   These can be used to determine the address of the DAC with which the
   DAS is communicating.  This information could be useful in mounting
   an attack on the DAC.

   radiusDynAuthServerIdentifier

   This can be used to determine the Identifier of the DAS.  This
   information could be useful in impersonating the DAS.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPsec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.






De Cnodder, et al.     Expires September 14, 2006              [Page 21]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


6.  IANA considerations

   IANA is requested to assign an OID xxx under mib-2.
















































De Cnodder, et al.     Expires September 14, 2006              [Page 22]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


7.  Acknowledgements

   The authors would also like to acknowledge the following people for
   their comments on this document: Bernard Aboba, Alan DeKok, David
   Nelson, Anjaneyulu Pata, Dan Romascanu, Greg Weber, Bert Wijnen, and
   Glen Zorn.













































De Cnodder, et al.     Expires September 14, 2006              [Page 23]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", RFC 2119, March 1997.

   [RFC2578]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Structure of Management
              Information Version 2 (SMIv2)", STD 58, RFC 2578,
              April 1999.

   [RFC2579]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Textual Conventions for
              SMIv2", STD 58, RFC 2579, April 1999.

   [RFC2580]  McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
              Rose, M., and S. Waldbusser, "Conformance Statements for
              SMIv2", STD 58, RFC 2580, April 1999.

   [RFC3411]  Harrington, D., Presuhn, R., and B. Wijnen, "An
              Architecture for Describing Simple Network Management
              Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
              December 2002.

   [RFC3576]  Chiba, M., Dommety, G., Eklund, M., Mitton, D., and B.
              Aboba, "Dynamic Authorization Extensions to Remote
              Authentication Dial In User Service (RADIUS)", RFC 3576,
              July 2003.

   [RFC4001]  Daniele, M. and et al., "Textual Conventions for Internet
              Network Addresses", RFC 4001, February 2005.

8.2.  Informative References

   [DYNCLNT]  De Cnodder, S., Jonnala, N., and M. Chiba, "RADIUS Dynamic
              Authorization Client MIB",
              draft-ietf-radext-dynauth-client-mib-03.txt, work in
              progress, December 2005.

   [RFC2618bis]
              Nelson, D., "RADIUS Auth Client MIB (IPv6)",
              draft-ietf-radext-rfc2618bis-01.txt work in progress,
              October 2005.

   [RFC2619bis]
              Nelson, D., "RADIUS Auth Server MIB (IPv6)",
              draft-ietf-radext-rfc2619bis-01.txt work in progress,



De Cnodder, et al.     Expires September 14, 2006              [Page 24]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


              October 2005.

   [RFC2620bis]
              Nelson, D., "RADIUS Acct Client MIB (IPv6)",
              draft-ietf-radext-rfc2620bis-01.txt work in progress,
              October 2005.

   [RFC2621bis]
              Nelson, D., "RADIUS Acct Server MIB (IPv6)",
              draft-ietf-radext-rfc2621bis-01.txt work in progress,
              October 2005.

   [RFC2865]  Rigney, C., Willens, S., Rubens, A., and W. Simpson,
              "Remote Authentication Dial In User Service (RADIUS)",
              RFC 2865, June 2000.

   [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
              "Introduction and Applicability Statements for Internet-
              Standard Management Framework", RFC 3410, December 2002.
































De Cnodder, et al.     Expires September 14, 2006              [Page 25]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


Authors' Addresses

   Stefaan De Cnodder
   Alcatel
   Francis Wellesplein 1
   B-2018 Antwerp
   Belgium

   Phone: +32 3 240 85 15
   Email: stefaan.de_cnodder@alcatel.be


   Nagi Reddy Jonnala
   Cisco Systems, Inc.
   Divyasree Chambers,  B Wing, O'Shaugnessy Road
   Bangalore-560027, India

   Phone: +91 98456 99445
   Email: njonnala@cisco.com


   Murtaza Chiba
   Cisco Systems, Inc.
   170 West Tasman Dr.
   San Jose CA, 95134

   Phone: +1 408 525 7198
   Email: mchiba@cisco.com























De Cnodder, et al.     Expires September 14, 2006              [Page 26]

Internet-Draft      Dynamic Authorization Server MIB          March 2006


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2006).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




De Cnodder, et al.     Expires September 14, 2006              [Page 27]