[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Please Clarify Doubts regarding RGT & RNC
Vishal....you asked (in mail below) for operator input.....perhaps you
missed this item I posted Wed 14/03/2001 13:35 on the thread 'RE: Three
GMPLS related IDs' against this ID from Yangguang Xu
http://www.ietf.org/internet-drafts/draft-xu-ccamp-gmpls-arch-intra-domain-0
0.txt
<prior text snipped NH>
10 In section 5.4.1.5 'actions' on trails are defined. For a CO
network with fixed BW selection at trail creation time it is very hard to
see what a 'modify' action could be....other than perhaps a change of
restoration priority and/or change of dedicated back-up trail/resource. If
there is any notion of (working) BW change here (be it a scalar magnitude
change, ie same route, or a vector change, ie new route (with or without a
scalar magnitude change)), it would seem to me that this is really a new
pair of 'create_new->switch_to_new->delete_old' actions. I note however
that this has been marked as TBD, but I think it would help if it was made
clear that BW changes cannot (IMO) be a single 'modify' action.
<post text snipped NH>
So in essence I agreed with what Juergen is saying.
neil
> -----Original Message-----
> From: Heiles Juergen [mailto:Juergen.Heiles@icn.siemens.de]
> Sent: 22 March 2001 09:07
> To: 'Vishal Sharma'; 'Hai Vodinh'; 'Zhi-Wei Lin'
> Cc: ccamp@ops.ietf.org; Greg Bernstein (E-mail)
> Subject: RE: Please Clarify Doubts regarding RGT & RNC
>
>
> Vishal,
>
> in the circuit switched world he connection has a fixed
> bandwidth. You cannot change the bandwidth. You have to tear
> down the connection and set-up a new one with a different
> bandwidth. For example if you want to change from VC-3
> (STS-1-SPE) to VC-4 (STS-3c-SPE) the VC-3 connection is
> released and a VC-4 connection is setup. The route could be
> different as some equipment migth support VC-3 but not VC-4s
> or vice versa.
> Virtual concatenation toegether with LCAS provides
> flexibility in certain steps. However it applies only to the
> end points as you mentioned. Between the end points you still
> setup connections with fixed bandwidth.
>
> Regards
>
> Juergen
>
> > -----Original Message-----
> > From: Vishal Sharma [SMTP:vishal@JasmineNetworks.com]
> > Sent: Thursday, March 22, 2001 9:36 AM
> > To: 'Hai Vodinh'; 'Zhi-Wei Lin'
> > Cc: ccamp@ops.ietf.org; Greg Bernstein (E-mail)
> > Subject: RE: Please Clarify Doubts regarding RGT & RNC
> >
> > Hai,
> >
> > Yes, now that you mention it, it probably is an important
> capability.
> > (Although,
> > I am not sure how soon it needs to be made available.)
> > [Again, any carriers listening on this channel?? "Hello, calling all
> > carriers... we need some service provider input here."]
<snipped to end NH>