[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: ason-routing-reqts: issue 2 architecture
Hi Dimitri,
I understand, I think, that for processing purposes there may
be an impact to identifying P1/P2/P3 as opposed to R1.
However, isn't the ability to distinguish P1/P2/P3 as
separate physical nodes very important to the routing of
a connection across the network? It is actually not so
important to know if they are controlled by a single
routing entity or not, except for maintaining the routing
protocol itself.
Cheers,
Lyndon
-----Original Message-----
From: Dimitri.Papadimitriou@alcatel.be
[mailto:Dimitri.Papadimitriou@alcatel.be]
Sent: Tuesday, March 16, 2004 1:59 PM
To: Ong, Lyndon
Cc: Adrian Farrel; Don Fedyk; Brungard, Deborah A, ALABS;
ccamp@ops.ietf.org
Subject: Re: ason-routing-reqts: issue 2 architecture
hi lyndon,
the question is not only to be more simpler for R1 (i don't think you
are more simpler you're just mapping the hierarchy of the abstract node
within the identification space) it is to so see how it impacts R2 and
R3, in term of the processing, how it impacts the abstraction level that
you want to achieve (do external R2 and R3 really care about the way R1
is performing id assignment) and finally what it brings in terms of
control plane functionality, arguments like cleaner, or simpler (what
simple means) are probably not be used in the present context, at the
end the issue is about practice and relevance
it also clear that if this additional level of indirection is proven to
be required nothing is said about the way to deliver it while you
already assumed it must take the form of a node_id (why a node_id ? why
not a shelve_id ? or a rack_id ?)
thanks,
- dimitri.
Ong, Lyndon wrote:
> Hi Guys,
>
> R1 was what I was referring to in my side note: it is
> possible to treat P1/P2/P3 as separate
> interfaces on a single abstract node, but you lose
> information about the physical topology and
> connectivity of the nodes. Also, this puts a
> constraint on the allocation of interface IDs across
> multiple nodes.
>
> Would it not be simpler and more straightforward to
> advertise P1/P2/P3 directly?
>
> Cheers,
>
> Lyndon
>
> -----Original Message-----
> From: Dimitri.Papadimitriou@alcatel.be
> [mailto:Dimitri.Papadimitriou@alcatel.be]
> Sent: Tuesday, March 16, 2004 12:58 PM
> To: Adrian Farrel
> Cc: Don Fedyk; Ong, Lyndon; Brungard, Deborah A, ALABS;
> ccamp@ops.ietf.org
> Subject: Re: ason-routing-reqts: issue 2 architecture
>
>
> adrian,
>
> yes, it reproduces the three cases, i had in mind over this
> discussion
>
> see in-line:
>
>
>>All,
>>Does the following picture capture what we want to achieve?
>>
>>
>> ------------------ ------
>> |R1 | |R2 |
>> | -- -- -- | | -- | ------
>> | |L1| |L2| |L3| | | |L4| | |R3 |
>> | -- -- -- | | -- | | -- |
>> | : : : | | : | | |L5| |
>>Control ---+-----+-----+-- ---+-- | -- |
>>Plane : : : : | : |
>>----------------+-----+-----+----------+------+---+--+-
>>Data : : : : | : |
>>Plane -- : -- -- | -- |
>> ----|P1|--------|P3|-------|P4|-----+-|P5|-+-
>> -- \ : / -- -- | -- |
>> \ -- / | |
>> |P2| ------
>> --
>>
>>Pn is a physical (bearer/data/transport plane) node.
>>Rn is a control plane "router"
>>Ln is a logical control plane entity that manages a single
>> physical node.
>>
>>Thus:
>>R3 represents an LSR with all components collocated.
>>R2 shows how the "router" component may be disjoint from
>> the switch
>>R1 shows how a single "router" may manage multiple switches
>>
>>If you can confirm this generalisation, then we can show (or fail to show)
>>A. That this is a requirement
>
>
> to support all them yes (i think that from a protocol
> capability perspective it is advisable)
>
>
>>B. That this can be achieved using existing protocols
>
>
> there is no difference between R2 and R3 since the DP
> to CP interactions were never part of the GMPLS routing
> discussions:
> - R2 <- Router_Address, R3 <- Router_Address
> - If_Id assigned to each interface
>
> for R1 (externally since representing an abstract node):
> - R1 <- Router_Address
> - If_Id assigned to each interface (with a value space
> common to P1, P2 and P3)
>
> for R1 if there is a need to cover also the internal
> (abstract node) links (is that the case?), in such a
> case, the Link_Id sub-TLV value should be discussed
>
>
>>Cheers,
>>Adrian.
>>
>>PS. Those not familiar with GSMP may want to take a quick peak.
>>
>>----- Original Message -----
>>From: "Don Fedyk" <dwfedyk@nortelnetworks.com>
>>To: <Dimitri.Papadimitriou@alcatel.be>; "Ong, Lyndon" <LyOng@Ciena.com>
>>Cc: "Adrian Farrel" <adrian@olddog.co.uk>; "Brungard, Deborah A, ALABS" <dbrungard@att.com>; <ccamp@ops.ietf.org>
>>Sent: Tuesday, March 16, 2004 7:34 PM
>>Subject: RE: ason-routing-reqts: issue 2 architecture
>>
>>
>>
>>
>>>Dimitri
>>>
>>>If you are saying the real or logical node id that is associated with the
>>>Data (bearer) plane should be unique? I would say yes.
>>>
>>>If you are saying could it be IP address format? I would say yes. (Note the
>>>link identifiers in IP address format are unique only with respect to the
>>>node id).
>>>
>>>But if you say Should it then follow each piece of equipment has knowledge
>>>of this IP address format that is assigned to it? I would say no because
>>>there is equipment that won't have this for some time. (A requirement I
>>>understand from ASON).
>>>
>>>So what I believe you are left with is some bearer equipment which has TE
>>>resources (a node Identifier (non-IP) and link identifiers (non-IP)). This
>>>equipment is known by its native identifiers to the entity in the control
>>>plane which can assign: IP format identifiers to the equipment (through some
>>>means) and an unique node identifier. This can then be advertised on its
>>>behalf as a GMPLS compatible TE LSA.
>>>
>>>This does create some challenges but in reality I think many devices are
>>>known by more than one name. (Look at VoIP, devices they have 2 identifiers
>>>E.164 and IP. I personally never use my IP address to make a VoIP phone call
>>>but I know that it is routed to a IP address along the way that is hidden
>>
>>>from me.)
>>
>>>I tend to agree with Lyndon that Topology is derived from TE advertisements.
>>>I don't understand what you could do without a unique logical node
>>>associated with the TE links.
>>>
>>>Don
>>>
>>>
>>>
>>>>-----Original Message-----
>>>>From: Dimitri.Papadimitriou@alcatel.be
>>>>[mailto:Dimitri.Papadimitriou@alcatel.be]
>>>>Sent: Tuesday, March 16, 2004 1:48 PM
>>>>To: Ong, Lyndon
>>>>Cc: Fedyk, Don [BL60:1A00:EXCH]; Adrian Farrel; Brungard,
>>>>Deborah A, ALABS; ccamp@ops.ietf.org
>>>>Subject: Re: ason-routing-reqts: issue 2 architecture
>>>>
>>>>
>>>>the problem is not an issue of being cleaner, the issue
>>>>is once the following assumption is taken (which is the
>>>>logical consequence of rfc 3630 in the gmpls context)
>>>>
>>>>"a stable IP address of the control plane entity that
>>>>manages the resources on behalf of the data plane
>>>>entity whose resources are being advertised."
>>>>
>>>>can we assume that wrt to this stable IP address the
>>>>resource identification will be unique (throughout
>>>>these multiple data plane entities) and in this case
>>>>it holds (no additional level of indirection needed),
>>>>or not (i.e. you will find duplicated id space values
>>>>and then an additional level of indirection is needed)
>>>>
>>>>the problem of the design team was not define the issue
>>>>but to find enough arguments wrt to the operational
>>>>practices (ie user community) in order to close this
>>>>
>>>>thanks,
>>>>- dimitri.
>>>>
>>>>Ong, Lyndon wrote:
>>>>
>>>>
>>>>>I had the same assumption as Don, that the RFC treats the
>>>>
>>>>advertising
>>>>
>>>>
>>>>>router and the bearer plane node as the same. It would be
>>>>
>>>>cleaner if
>>>>
>>>>
>>>>>there was also a bearer plane node identifier in the advertisement.
>>>>>
>>>>>Cheers,
>>>>>
>>>>>Lyndon
>>>>>
>>>>>-----Original Message-----
>>>>>From: Don Fedyk [mailto:dwfedyk@nortelnetworks.com]
>>>>>Sent: Tuesday, March 16, 2004 9:56 AM
>>>>>To: Adrian Farrel; Brungard, Deborah A, ALABS; ccamp@ops.ietf.org
>>>>>Subject: RE: ason-routing-reqts: issue 2 architecture
>>>>>
>>>>>
>>>>>Hi Adrian
>>>>>
>>>>>See Comments Below,
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>-----Original Message-----
>>>>>>From: Adrian Farrel [mailto:adrian@olddog.co.uk]
>>>>>>Sent: Monday, March 15, 2004 4:18 PM
>>>>>>To: Brungard, Deborah A, ALABS; ccamp@ops.ietf.org
>>>>>>Subject: Re: ason-routing-reqts: issue 2 architecture
>>>>>>
>>>>>>
>>>>>>I assume that the desire is to have one control plane entity
>>>>>>mange multiple data plane entities (not to have one data
>>>>>>plane entity managed by multiple control plane entities).
>>>>>
>>>>>
>>>>>I agree.
>>>>>
>>>>>
>>>>>
>>>>>>I believe. in this context, it might be helpful to separate
>>>>>>the signaling function (and the associated routing function
>>>>>>for the delivery of the signaling messages) from the TE
>>>>>>advertisement routing function. Since we are discussing the
>>>>>>routing requirements (this is the routing DT) can I assume
>>>>>>that the discussion is limited to the TE advertisement
>>>>>>routing function, with the aim to have one control plane
>>>>>>entity advertise the resources on behalf of multiple data
>>>>>>plane entities.
>>>>>>
>>>>>>If all of the above, why could you not simply do this using
>>>>>>RFC3630? The only wrinkle might be that the Router Address
>>>>>>TLV is described as carrying "a stable IP address of the
>>>>>>advertising router". Clearly, this needs to be interpreted as
>>>>>>"a stable IP address of the control plane entity that manages
>>>>>>the resources on behalf of the data plane entity whose
>>>>>>resources are being advertised."
>>>>>
>>>>>
>>>>>Interesting. I thought that you need a logical node id for
>>>>
>>>>the bearer
>>>>
>>>>
>>>>>plane as well even though you are only advertising from a single
>>>>>entity. In other words, is it not the desire to have the TE
>>>>>advertisements contain the same information regardless of whether
>>>>>there is a one to one correspondence between the nodes in
>>>>
>>>>control and
>>>>
>>>>
>>>>>the data plane or there is a one to many relationship? My
>>>>>interpretation of RFC3630 is that it assumes the
>>>>
>>>>advertising router is
>>>>
>>>>
>>>>>the same as the logical node in the bearer plane that owns the
>>>>>resources. If a logical node id was added to the
>>>>
>>>>advertisement for the
>>>>
>>>>
>>>>>node terminating the resources when the advertising router
>>>>
>>>>was not the
>>>>
>>>>
>>>>>bearer node that owned the resources it would be clearer to me.
>>>>>
>>>>>Don
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Am I missing something?
>>>>>>
>>>>>>Adrian
>>>>>>
>>>>>>----- Original Message -----
>>>>>>From: "Brungard, Deborah A, ALABS" <dbrungard@att.com>
>>>>>>To: <ccamp@ops.ietf.org>
>>>>>>Sent: Monday, March 15, 2004 7:43 PM
>>>>>>Subject: ason-routing-reqts: issue 2 architecture
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>ftp://ftp.isi.edu/internet-drafts/draft-ietf-> ccamp-gmpls-ason-routing-
>>>>
>>>>
>>>>>reqts-
>>>>>02.txt
>>>>>
>>>>>The second DT issue is on the physical architecture which can be
>>>>>supported by GMPLS (from the draft):
>>>>>
>>>>>ASON does not restrict the architecture choices used, either a
>>>>>co-located architecture or a physically separated
>>>>
>>>>architecture may be
>>>>
>>>>
>>>>>used. Some members of the Design Team are concerned that GMPLS's
>>>>>concept of the LSR requires a 1-to-1 relationship between the
>>>>>transport plane entity and the control plane entity (Router). They
>>>>>invite CCAMP input on GMPLS capabilities to support multiple
>>>>>architectures i.e. how routing protocols would identify the
>>>>
>>>>transport
>>>>
>>>>
>>>>>node ID vs. the router or routing controller ID when
>>>>
>>>>scoping Link IDs
>>>>
>>>>
>>>>>in a link advertisement. Deborah
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>--
>>>>Papadimitriou Dimitri
>>>>E-mail : dimitri.papadimitriou@alcatel.be
>>>>E-mail : dpapadimitriou@psg.com
>>>>Webpage: http://psg.com/~dpapadimitriou/
>>>>Address: Fr. Wellesplein 1, B-2018 Antwerpen, Belgium
>>>>Phone : +32 3 240-8491
>>>>
>>>>
>>>
>
--
Papadimitriou Dimitri
E-mail : dimitri.papadimitriou@alcatel.be
E-mail : dpapadimitriou@psg.com
Webpage: http://psg.com/~dpapadimitriou/
Address: Fr. Wellesplein 1, B-2018 Antwerpen, Belgium
Phone : +32 3 240-8491