Thank you very much!
Your tunnel-broker is very easy to use!
But I think what I need is not to use tunnel
toker.
My task is to set up 6to4 tunnel mechanism (RFC 3056). I think
it is default supported in linux 2.6 kernel.
I have three PC,all have supported ipv6. one has been configured to be ipv6 router.(by
IPV6FORWARDING=yes)
the other two are hosts which are in different v6 subnet with
different netmask.
Now my problem is
1: configure ipv6 router to be 6to4 router.How to do it?or it
is default 6to4 router because linux2.6 support RFC 3056
default.right?
2:set up 6to4 tunnel on one host. I have done it refering to
"LINUX IPV6 HOWTO",but it doesn't work. I really don't know how to do!Would
please help me?
Thank you
Yale
----- Original Message -----
Sent: Wednesday, October 06, 2004 3:46
PM
Subject: Re: why the
usagi-linux26-s****.tar.bz2 is unavailable?
It is friendly and easy to use. Let me know any issue you have about
it.
Regards
************************************ Miguel A. Diaz
Telecommunication Engineer Support and R&D
----- Original Message -----
Sent: Tuesday, October 05, 2004 11:12
AM
Subject: why the
usagi-linux26-s****.tar.bz2 is unavailable?
Dear All,
I am just a newer to study Linux for IPV6.
My linux core is 2.6.I want to add usagi to support IPV6
appication. But I try several usagi such as: usagi-linux26-s****.tar.bz2,
all are unavailable.
Whould you please tell me why and what I should do
?
And another question:
How can I add a 6to4 tunnel?
Thank you !
Yale
RRS716
CS Department
HKBU
********************************** Madrid
2003 Global IPv6 Summit Presentations and videos on line
at: http://www.ipv6-es.com
This electronic message contains
information which may be privileged or confidential. The information is
intended to be for the use of the individual(s) named above. If you are not
the intended recipient be aware that any disclosure, copying, distribution or
use of the contents of this information, including attached files, is
prohibited.
|