From: Internet-Drafts@ietf.org
Date: July 13, 2005 12:50:01 PM PDT
To: i-d-announce@ietf.org
Cc: v6ops@ops.ietf.org
Subject: I-D ACTION:draft-ietf-v6ops-vlan-usage-00.txt
A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the IPv6 Operations Working Group of the
IETF.
Title : Use of VLANs for IPv4-IPv6 Coexistence in Enterprise Networks
Author(s) : T. Chown
Filename : draft-ietf-v6ops-vlan-usage-00.txt
Pages : 12
Date : 2005-7-13
Ethernet VLANs are quite commonly used in enterprise networks for
the
purposes of traffic segregation. This document describes how such
VLANs can be readily used to deploy IPv6 networking in an
enterprise,
which focuses on the scenario of early deployment prior to
availability of IPv6-capable switch-router equipment. In this
method
IPv6 may be routed in parallel with the existing IPv4 in the
enterprise and delivered at Layer 2 via VLAN technology. The IPv6
connectivity to the enterprise may or may not enter the site via the
same physical link.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-v6ops-vlan-usage-00.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-ietf-v6ops-vlan-usage-00.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-v6ops-vlan-usage-00.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
Content-Type: text/plain
Content-ID: <2005-7-13104009.I-D@ietf.org>