[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [AAA-WG]: AW: Comments to draft-sterman-aaa-sip-03 and draft-ietf-aaa-sip-a pp-03

To: "Beck01, Wolfgang" <BeckW@t-systems.com>
Subject: Re: [AAA-WG]: AW: Comments to draft-sterman-aaa-sip-03 and draft-ietf-aaa-sip-a pp-03
From: Bernard Aboba <aboba@internaut.com>
Date: Mon, 9 Aug 2004 05:50:30 -0700 (PDT)
Cc: radiusext@ops.ietf.org
In-reply-to: <76C27E1CE3FFC847B4D51C645D6F42AA15FD5F@E9JDF.mgb01.telekom.de>
References: <76C27E1CE3FFC847B4D51C645D6F42AA15FD5F@E9JDF.mgb01.telekom.de>

> After converting the draft to flat attributes, I tried to save attribute
> space. It is a scarce resource in RADIUS.

Point of process.  In the RADEXT WG, issues are not resolved by assertion.
They are resolved by WG discussion.

Also, saving attribute space is not a design goal of this document.
Diameter compatibility *is* a design goal.

Issue 4 will remain open until the Diameter compatibility implications are
discussed and understood.

--
to unsubscribe send a message to radiusext-request@ops.ietf.org with
the word 'unsubscribe' in a single line as the message text body.
archive: <http://psg.com/lists/radiusext/>

Follow-Ups:
- Re: [AAA-WG]: AW: Comments to draft-sterman-aaa-sip-03 and draft-ietf-aaa-sip-a pp-03
  - From: Jari Arkko <jari.arkko@piuha.net>

References:
- AW: Comments to draft-sterman-aaa-sip-03 and draft-ietf-aaa-sip-a pp-03
  - From: "Beck01, Wolfgang" <BeckW@t-systems.com>

Prev by Date: AW: Comments to draft-sterman-aaa-sip-03 and draft-ietf-aaa-sip-a pp-03
Next by Date: Re: [AAA-WG]: AW: Comments to draft-sterman-aaa-sip-03 and draft-ietf-aaa-sip-a pp-03
Previous by thread: AW: Comments to draft-sterman-aaa-sip-03 and draft-ietf-aaa-sip-a pp-03
Next by thread: Re: [AAA-WG]: AW: Comments to draft-sterman-aaa-sip-03 and draft-ietf-aaa-sip-a pp-03
Index(es):
- Date
- Thread