[T1M1SEC] FW: Mgmnt Plane Sec - T1.276-2003 Published 2 Days afterANSI App roval! (fwd)

[Chris Lonvick <clonvick@cisco.com>]

Hi,


T1.276-2003 is now a published American National Standard.  See below.

Thanks,
Chris


---------- Forwarded message ----------
Date: Fri, 25 Jul 2003 13:09:17 -0600
From: "Fargano, Michael" <Michael.Fargano@qwest.com>
To: t1m1sec@t1.org
Cc: 'McGowan Marcia' <mcgowan_marcia@bah.com>,
     "T1M1 ALL (t1m1all@t1.org)" <t1m1all@t1.org>
Subject: [T1M1SEC] FW: Mgmnt Plane Sec - T1.276-2003 Published 2 Days after
    ANSI App roval!

T1M1SEC:

See attached for great news regarding the publication and availability of
T1.276-2003. Thanks to all for a job well done!

A special thanks to the Committee T1 Secretariat (Susan Carioti, et. al.,
see attached email) for the expedited publication success and to Marcia
McGowan for the expert technical editing job and for the management of the
work.

Sincerely,
Mike

-----------------------------------------------------------------
Mike Fargano
Industry Standards Coordinator
Qwest Technology Management
Email: Michael.Fargano@qwest.com
Phone: 303-896-3618
Numeric Pager (toll-free): 877-433-1561
Text Pager - 2-Way Short Message - Email: 8774331561@skytel.com
Fax: 303-896-7040


-----Original Message-----
From: Susan Carioti [mailto:SCARIOTI@atis.org]
Sent: Friday, July 25, 2003 7:55 AM
To: rhapeman@telcordia.com; zeuch@lucent.com
Cc: officers@t1.org; James Crandall; Steve Barclay; Chad Underkoffler;
Jacqueline Brown-Ervin; James Willits; Fargano, Michael;
rroman@telcordia.com
Subject: Mgmnt Plane Sec - T1.276-2003 Published 2 Days after ANSI Approval!

Ray and Wayne:

I have some very good news to report.  The subject T1 Standard on
Management Plane Security was ANSI approved on 7/23/03 and final
edited/published and available on 7/25/03; in only 2 days.

The standard is available via the ATIS Document Center at:

https://www.atis.org/atis/docstore/doc_display.asp?ID=1924

A notice of this standards availability will be sent to T1 and T1M1
shortly along with other T1 standards.

We are pleased that the editing/publishing processes used for this high
profile standard worked as targeted.  I particularly would like to thank
Chad Underkoffler, Jacki Brown-Ervin and Jim Willits of the ATIS staff
for their hard work in making this happen.

Mike has informed us that the hyperlink of this T1.276-2003 Standard
will be part of the NSTAC report to the President.

Best regards,
Susan

cc:  Officers distribution list



-----Original Message-----
From: Susan Carioti
Sent: Thursday, July 24, 2003 6:09 AM
To: 'rhapeman@telcordia.com'
Cc: 'zeuch@lucent.com'; James Crandall; 'michael.fargano@qwest.com';
'rroman@telcordia.com'; Chad Underkoffler; Jacqueline Brown-Ervin
Subject: FW: Notification of Final Action for ANSI T1.276-2003

Hi Ray:

Below for your information and record is the ANSI approval of the
subject T1/T1M1 Standard.

Best regards,
Susan


-----Original Message-----
From: Charlene Banks [mailto:CBANKS@ansi.org]
Sent: Wednesday, July 23, 2003 12:09 PM
To: Susan Carioti
Subject: Notification of Final Action for ANSI T1.276-2003

Susan Carioti
Alliance for Telecommunications Industry Solutions

RE: Notification on Final Action on:  ANSI T1.276-2003
Operations, Administration, Maintenance, and Provisioning Security
Requirements for the Public Telecommunications Network: A Baseline of
Security Requirements for the Management Plane
(new standard)
Approval Date of Final Action: 7/23/2003

The Board of Standards Review has approved the above action in
connection
with a candidate American National Standard:

Notice of this Final Action will be published in an upcoming issue of
Standards Action. For actions other than withdrawals, applicable
publication
and maintenance requirements are contained in clause 4 of the ANSI
Essential
Requirements: Due process requirements for American National Standards.


If your organization has arranged for ANSI to publish this standard,
please
contact Bob Hager in the Publishing Department at 212-642-4917.
Arrangements and questions concerning ANSI's sale of this standard
should be
directed to Rose Maginniss at (212) 642-4999.

If you believe that this American National Standard may be of interest
to
the Occupational Safety and Health Administration (OSHA) for possible
regulatory adoption, please forward a copy of the published standard to
OSHA
at the address listed below:

Marthe Kent, Director of Safety Standards
Directorate of Safety Standards Programs
U.S. Department of Labor/OSHA
200 Constitution Avenue, N.W., Room N3609
Washington, D.C.  20210

Notification of Right to Appeal to the ANSI Board of Standards Review
In accordance with ANSI Essential Requirements, those objecting to this
final action who have completed the appeals process at the Standards
Developer are hereby notified of their right to file a procedural
appeal.
If you have not completed the appeals process at the standards
developer,
you are normally not eligible to appeal to the BSR.  If you are eligible
and
choose to appeal, the appeal statement and all supporting documentation
must
be filed in writing with the office of the undersigned within 15 working
days after receipt of this official notification.  The appeal must be
based
on procedural criteria, and include a statement as to why the BSR action
should be modified.  The BSR will not render decisions on the relative
merits of technical matters, but it shall consider whether due process
was
afforded technical concerns.  The appeal must be accompanied by a $500
filing fee payable to ANSI.

Your appeal and all supporting documentation must be filed in writing
with
the office of the undersigned within 15 working days after receipt of
this
official notification.  If you require an extension of this filing
deadline,
please direct your written request along with a justification therefore
to
the office of the undersigned before the 15 working day deadline or you
shall forfeit your right to appeal. A complete copy of the BSR's
Operating
Procedures,  including clause 7, which addresses the appeals process, is
posted at http://public.ansi.org/ansionline/portal/search

Please contact me at (212) 642-4914,  acaldas@ansi.org or via fax to
(212)
840-2298 if you have any questions or if I may be of assistance to you.

Thank you for your continued support of the American National Standards
process.

Sincerely,
Anne Caldas
Secretary, Board of Standards Review